| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Contributed by luzpaz.
Differential Revision: https://developer.blender.org/D14443
|
|
color attribute system.
This commit removes sculpt colors from experimental
status and unifies it with vertex colors. It
introduces the concept of "color attributes", which
are any attributes that represents colors. Color
attributes can be represented with byte or floating-point
numbers and can be stored in either vertices or
face corners.
Color attributes share a common namespace
(so you can no longer have a floating-point
sculpt color attribute and a byte vertex color
attribute with the same name).
Note: this commit does not include vertex paint mode,
which is a separate patch, see:
https://developer.blender.org/D14179
Differential Revision: https://developer.blender.org/D12587
Ref D12587
|
|
This adds a new Grow/Shrink brush which is similar to the Length
brush in the old hair system.
* It's possible to switch between growing and shrinking by hold
down ctrl and/or by changing the direction enum.
* 3d brush is supported.
* Different brush falloffs are supported.
* Supports scaling curves uniformly or shrinking/extrapolating
them. Extrapolation is linear only in this patch.
* A minimum length settings helps to avoid creating zero-sized curves.
Differential Revision: https://developer.blender.org/D14474
|
|
Those geometry types are expected to behave the same as e.g. mesh
with respect to data copying. The fact that this was not enabled
already was an oversight in the initial commit that added these types.
Differential Revision: https://developer.blender.org/D14554
|
|
This experimental preference was not making much difference with
selection set to left-mouse for the 3D view and UV editor. Now dragging
the existing selection is possible when this preference is enabled.
|
|
Ignore this experimental preference for the sequencer.
|
|
Ensure the fallback transforms on drag when used as a fallback.
|
|
Disable select-passthrough on release events.
|
|
This was added [0] but the property is missing in the operator.
[0]: e49fef45cef7d53ae856a943e125838cdfcea0a0
|
|
Add a new panel called "Tweaks" so we can get feedback from users
about minor tweaks to behavior as exposing these minor changes.
Currently this only has a single item in it, however we may want to
get feedback from users about small changes in the future so I'd
prefer to have a place to list these kinds of options.
Ref D14542
|
|
Remove much of the old legacy pose library:
- Remove from the Pose & Armature menus.
- Remove from the default keymap.
- Pose Library panel in Armature properties: Add "(legacy)" to title.
- Add note that the functionality of that panel is obsolete, with a
button that opens the manual on the chapter of the new pose library.
- Add button to convert the selected legacy pose library to pose assets.
- The rest of the functionality is greyed out to further communicate
it's been deprecated. It's still functional, though.
Ref: T93405
|
|
Add edge panning feature to transform operator. It works in same way as
in node editor, but Y axis is limited by usable range up to 128
channels.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14310
|
|
This only adds a experimental flag to enable the 3d texturing brush,
so future developments could check. Currently the flag does nothing
as no functionality of the 3d texturing brush has been implemented.
|
|
This patch adds channel region to VSE timeline area for drawing channel
headers. It is synchronizedwith timeline region. 3 basic features are
implemented - channel visibility, locking and name.
Channel data is stored in `SeqTimelineChannel` which can be top-level
owned by `Editing`, or it is owned by meta strip to support nesting.
Strip properties are completely independent and channel properties are
applied on top of particular strip property, thus overriding it.
Implementation is separate from channel regions in other editors. This
is mainly because style and topology is quite different in VSE. But
also code seems to be much more readable this way.
Currently channels use functions similar to VSE timeline to draw
background to provide illusion of transparency, but only for background
and sfra/efra regions.
Great portion of this patch is change from using strip visibility and
lock status to include channel state - this is facilitated by functions
`SEQ_transform_is_locked` and `SEQ_render_is_muted`
Originally this included changes in D14263, but patch was split for
easier review.
Reviewed By: fsiddi, Severin
Differential Revision: https://developer.blender.org/D13836
|
|
This takes state of soc-2020-io-performance branch as it was at
e9bbfd0c8c7 (2021 Oct 31), merges latest master (2022 Apr 4),
adds a bunch of tests, and fixes a bunch of stuff found by said
tests. The fixes are detailed in the differential.
Timings on my machine (Windows, VS2022 release build, AMD Ryzen
5950X 32 threads):
- Rungholt minecraft level (269MB file, 1 mesh): 54.2s -> 14.2s
(memory usage: 7.0GB -> 1.9GB).
- Blender 3.0 splash scene: "I waited for 90 minutes and gave up"
-> 109s. Now, this time is not great, but at least 20% of the
time is spent assigning unique names for the imported objects
(the scene has 24 thousand objects). This is not specific to obj
importer, but rather a general issue across blender overall.
Test suite file updates done in Subversion tests repository.
Reviewed By: @howardt, @sybren
Differential Revision: https://developer.blender.org/D13958
|
|
|
|
This tool can be used to rapidly edit curves. The current set of
functionalities for Bezier splines are as follows:
The functionalities are divided into three versions of the operator:
* Left-Click
* Ctrl + Left-Click
* Double Click
All current functionalities and their defaults are as follows:
* Extrude Point: Add a point connected to an existing point.
Enabled for Left-Click.
* Extrude Handle Type: Type of the handles of the extruded points.
Can be either Vector or Auto. Defaults to Vector.
* Delete Point: Delete existing point.
Enabled for Ctrl + Left-Click.
* Insert Point: Insert a point into a curve segment.
Enabled for Ctrl + Left-Click.
* Move Segment: Move curve segment.
Enabled for Left-Click.
* Select Point: Select a single point or handle at a time.
Enabled for Left-Click.
* Move point: Move existing points or handles.
Enabled for Left-Click.
* Close Spline: Close spline by clicking the endpoints consecutively.
Defaults to True.
* Close Spline Method: The condition for Close Spline to activate.
Can be one of None, On Press or On Click.
Defaults to On Click for Left-Click and None for the others.
* None: Functionality is turned off.
* On Press: Activate on mouse down.
This makes it possible to move the handles by dragging immediately
after closing the spline.
* On Click: Activate on mouse release.
This makes it possible to avoid triggering the Close Spline
functionality by dragging afterward.
* Toggle Vector: Toggle handle between Vector and Auto handle types.
Enabled for Double Click on a handle.
* Cycle Handle Type: Cycle between all four handle types.
Enabled for Double Click on the middle point of a Bezier point.
The keybindings for the following functionalities can be adjusted from
the modal keymap
* Free-Align Toggle: Toggle between Free and Align handle types.
Defaults to Left Shift. Activated on hold.
* Move Adjacent Handle: Move the closer handle of the adjacent vertex.
Defaults to Left Ctrl. Activated on hold.
* Move Entire: Move the entire point by moving by grabbing on the handle
Defaults to Spacebar. Activated on hold.
* Link Handles: Mirror the movement of one handle onto the other.
Defaults to Right Ctrl. Activated on press.
* Lock Handle Angle: Move the handle along its current angle.
Defaults to Left Alt. Activated on hold.
All the above functionalities, except for Move Segment and
those that work with handles, work similarly in the case of Poly
and NURBS splines.
Reviewed By: HooglyBoogly, weasel, campbellbarton
Differential Revision: http://developer.blender.org/D12155
|
|
Light groups are a type of pass that only contains lighting from a subset of light sources.
They are created in the View layer, and light sources (lamps, objects with emissive materials
and/or the environment) can be assigned to a group.
Currently, each light group ends up generating its own version of the Combined pass.
In the future, additional types of passes (e.g. shadowcatcher) might be getting their own
per-lightgroup versions.
The lightgroup creation and assignment is not Cycles-specific, so Eevee or external render
engines could make use of it in the future.
Note that Lightgroups are identified by their name - therefore, the name of the Lightgroup
in the View Layer and the name that's set in an object's settings must match for it to be
included.
Currently, changing a Lightgroup's name does not update objects - this is planned for the
future, along with other features such as denoising for light groups and viewing them in
preview renders.
Original patch by Alex Fuller (@mistaed), with some polishing by Lukas Stockner (@lukasstockner97).
Differential Revision: https://developer.blender.org/D12871
|
|
While it still has known issues/bugs/limitations. Also do not make it the very first export menu item, while at it.
Differential: D14512
|
|
Adds a dropdown for the Library Overrides display mode that lets users
choose between a "Properties" and a "Hierachies" view mode. The former
is what was previously there (a mode that displays all overridden
properties with buttons to edit the values), the latter is new. It
displays the hierarchical relationships between library overridden
data-blocks. E.g. to override the mesh of an object inside a linked
collection, the entire collection > object > mesh hierarchy needs to be
overridden (whereby the former two will be automatically overridden
using system overrides).
The Hierarchies mode will also show the override hierarchies of
data-blocks that were linked and are overridden in the source file. This
information is useful to have, especially for debugging scenes.
Part of T95802.
Differential Revision: https://developer.blender.org/D14440
Reviewed by: Bastien Montagne
|
|
029cf23d71b3 changed some icons alignment, but after 9be49a106994
the icons don't align anymore. This commit reverts 029cf23d71b3 and
also makes a couple of other outliner icons left aligned, instead of
right aligned, for consistency and general alignment.
Differential Revision: https://developer.blender.org/D14501
|
|
Also change some remaining cases of "hair object" to "curves object".
|
|
This commit makes the dot grid used as background in the node editor
more visually stable when zooming in and out.
The dot grid now uses a continuously subdividing pattern, where
each level of subdivision divides the previous five times, similar to
the line grid in the 3D viewport.
The maximum for the "Grid Levels" theme setting is changed to 3, since
any further subdivisions are too small to be visible.
The "Grid Levels" value for the default themes "Blender Dark" and
"Blender Light" is therefore changed to 3, as well.
Reviewed By: Hans Goudey, Pablo Vazquez
Differential Revision: http://developer.blender.org/D13302
|
|
This adds a new operator that converts all selected curves objects
into hair particle systems on their respective surface objects. Existing
particle systems with the correct name are updated, otherwise a new
particle system is added.
The purpose of the operator is the make the new curve sculpting tools
useful even before all functionality is ported over from the old hair system.
The operator can be found in the `Object > Convert` menu in object mode,
when a curves object is active.
Differential Revision: https://developer.blender.org/D14441
|
|
The current behaviour is to prevent multi-user data from having its
transformation applied.
However in some particular cases it is possible to apply them:
* If all the users of the multi-user data are part of the selection.
* If not all the users are in the selection but the selection is made
single-user.
The active object is used as reference to set the transformation of the
other selected objects.
Note: For simplicity sake, this new behaviour is only available if all
the selection is using the same data.
Differential Revision: https://developer.blender.org/D14377
|
|
While it's useful for click-drag to leave the selection as-is
(when clicking on items that are already selected), it's useful
for a single click to de-select all other elements.
This also removes the need for the initial selection to set the object
as active since this is possible by clicking on it.
|
|
|
|
Don't always create a new geometry nodes node tree when adding a
geometry nodes modifier.
This avoids files getting cluttered with empty and unused geometry node
trees that are created every time a nodes modifier is added to an
object - even if only to apply an already existing.
This is also more consistent with other modifiers that also don't
automatically create new data blocks.
The new modifier still automatically gets populated with a new node
tree when adding it via the "New" button in the header of the
geometry nodes editor.
Reviewed By: Hans Goudey, Dalai Felinto, Pablo Vazquez
Differential Revision: D14458
|
|
The "dupli" system now has a faster, more powerful, and more flexible
alternative with geometry nodes. Since the point cloud objects haven't
been exposed in the non-experimental UI yet, we can remove the dupli
implementation and the panel for the object type.
Differential Revision: https://developer.blender.org/D14482
|
|
This implements the spherical brush and different falloff
modes for the Snake Hook brush.
Differential Revision: https://developer.blender.org/D14408
|
|
The indirect library data icon was just a grayed out version of the
regular one. This graying out is now done in code, so the icon can be
removed from the SVG. Note that the icon is still defined as
`ICON_LIBRARY_DATA_INDIRECT` (or `LIBRARY_DATA_INDIRECT` in BPY).
|
|
|
|
On Windows/MSVC this gives a minor (~20%) speedup presumably due to a faster float/int formatter. On macOS (Xcode13), this gives a massive speedup, since snprintf that is in system libraries ends up spending almost all the time inside some locale-related mutex lock.
The actual exporter code becomes quite a bit smaller too, since it does not have to do any juggling to support std::string arguments, and the buffer handling code is smaller as well.
Windows (VS2022 release build, Ryzen 5950X 32 threads) timings:
- Blender 3.0 splash scene (2.4GB obj): 4.57s -> 3.86s
- Monkey subdivided level 6 (330MB obj): 1.10s -> 0.99s
macOS (Xcode 13 release build, Apple M1Max) timings:
- Blender 3.0 splash scene (2.4GB obj): 21.03s -> 5.52s
- Monkey subdivided level 6 (330MB obj): 3.28s -> 1.20s
Linux (ThreadRipper 3960X 48 threads) timings:
- Blender 3.0 splash scene (2.4GB obj): 10.10s -> 4.40s
- Monkey subdivided level 6 (330MB obj): 2.16s -> 1.37s
The produced obj/mtl files are identical to before.
Reviewed By: Howard Trickey, Dalai Felinto
Differential Revision: https://developer.blender.org/D13998
|
|
so a layer can be occluded by the scene instead of always showing in front
---
{F12827163}
Reviewed By: fclem, antoniov
Differential Revision: https://developer.blender.org/D13931
|
|
Missed in fe1816f67fbc6aaf383ec
|
|
There is a dedicated Library Override display mode now, and showing
these elsewhere just adds noise and makes the code problematic to
maintain (since the same element hierarchy will be used in two entirely
different contexts). The corresponding filter settings are removed too.
Part of T95802.
Reviewed by: Bastien Montagne
Differential Revision: https://developer.blender.org/D14411
|
|
Object mode selection does a kind of cycling that excludes the active
selected object. This is separate from regular selection cycling which
is enabled when clicking multiple times without moving the cursor.
This has the down-side that clicking on an object to drag it always
selects the object behind it (in the case of overlapping objects).
Since object mode selection is fundamental functionality, this is
exposed as an experimental preference for user feedback & testing.
See T96752 for details.
|
|
In my opinion Scale Thickness feels similar to Only Locations and was missing from the pie menu in grease pencil edit mode, so here I added it.
Differential Revision: https://developer.blender.org/D12530
|
|
This was already as a preference for the tweak tool,
this preference enables the option for all selection
in the 3D view & UV editor.
This extends on changes from T96544.
|
|
|
|
New supported features:
* 3D/spherical brush that samples a good position on the curves.
* Falloff.
The custom falloff curve mapping is not yet available in the ui because that
requires some more ui reorganization. This is better done when we have
a better understanding of what settings we need exactly.
Currently, the depth of the 3d brush is only sampled once per stroke, when
first pressing LMB. Sometimes it is expected that the depth of the brush can
change within a single brush. However, implementing that in a good way
is not straight forward and might need additional options. Therefore that
will be handled separately. Some experimentation results are in D14376.
Ref T96445.
Differential Revision: https://developer.blender.org/D14376
|
|
The Output Properties > Output panel now has a Color Management subpanel to
override scene settings. When set to Override instead of Follow Scene, there
are settings to:
* For OpenEXR, choose a (linear) colorspace for RGBA passes
* For other file formats, use different display/view/look/exposure/gamma
These settings affect animation render output, image save of renders and the
compositor file output node. Additionally, the image save operator and
compositor file output nodes also support overriding color management.
Includes some layout changes to the relevant panels to accomdate the new
settings and to improve consistency. Ideally subpanels would be used to better
organize these settings, however nodes and operators don't currently support
creating subpanels.
Differential Revision: https://developer.blender.org/D14402
|
|
- Follow the same conventions as the 3D viewport for UV selection
(using SelectPick_Params internally).
- Use WM_operator_properties_mouse_select for selection properties.
|
|
|
|
This adds a new Add brush for the new curves object type in sculpt mode.
The brush is used to insert new curves (typically hair) on the surface object.
Supported features:
* Add single curve exactly at the cursor position when `Add Amount` is 1.
* Front faces only.
* Independent interpolate shape and interpolate length settings.
* Smooth and flat shading affects curve shape interpolation.
* Spherical and projection brush.
This also adds the `surface_triangle_index` and `surface_triangle_coordinate`
attributes. Those store information about what position on the surface each
added curve is attached to:
* `surface_triangle_index` (`int`): Index of the internal triangle that a curve
is attached to. `-1` when the curve is not attached to the surface.
* `surface_triangle_coordinate` (`float2`): First two numbers of a barycentric
coordinate that reference a specific position within the triangle.
Ref T96444.
Differential Revision: https://developer.blender.org/D14340
|
|
Rename OpenGL to GPU, Show to Text Info Overlay, and various other tweaks.
Differential Revision: https://developer.blender.org/D14344
|
|
|
|
This patch fixes T96655, bloom crashing Eevee.
The error occurs because rB472fc0c55848b2e2d428cfb4f7debb80a4e12081 added `vec3 safe_color(vec3 c)` to `common_math_lib.glsl`.
However, `vec3 safe_color(vec3 c)` already exists in `effect_bloom_frag.glsl`.
This means `vec3 safe_color(vec3 c)` is duplicated within `common_math_lib.glsl` and `effect_bloom_frag.glsl`.
{F12938060 size=full}
The duplicate code in `effect_bloom_frag.glsl` can be removed since it's no longer needed.
(I checked the remaining methods, there shouldn't be any additional duplicate code)
Reviewed By: fclem
Maniphest Tasks: T96655
Differential Revision: https://developer.blender.org/D14396
|
|
The previous fix looks to have been accidentally removed as part of
rB7aec5b06227.
Restore the change.
|
