| Age | Commit message (Collapse) | Author |
|---|
|
Rename the mesh circle to "Mesh Circle", mesh line to "Mesh Line",
and mesh subdivide to "Mesh Subdivide". Previously they looked exactly
the same in the search menu, and the nodes themselves had the same
label. This is a "deep" rename that also renames internal defines and
function names to match the UI.
|
|
This node is quite similar to the curve to points node, but creates
points for only the start and end of each spline. This is a separate
node because the sampling from the curve to points node don't apply,
and just for ease of use.
All attributes from the curves are copied, including the data for
instancing: tangents, normals, and the derived rotations. One simple
use case is to make round caps on curves by instancinghalves of a
sphere on each end of the splines.
Differential Revision: https://developer.blender.org/D11719
|
|
Use "Snap Playhead to Strips" option to enable playhead snapping.
Change behavior of CTRL key to invert snapping similar to transform operator.
Currently this option is disabled by default. It makes editing quite unpleasant
for me personally, but ideally I should gather feedback from more users.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D11745
|
|
Partially revert 7fc220517f87a2c40a4f438a50485233ae6ed62f, as it
introduced two issues:
- Deleting keys without active keying set was no longer possible, and
- there was no more confirmation popup.
Pressing {key Alt I} in the 3D Viewport now executes
`ANIM_OT_keyframe_delete_v3d`, adjusted to suit both T88068 and T89592:
- If there is an active keying set, delete keys according to that keying
set.
- Otherwise, behave as `ANIM_OT_keyframe_delete_v3d` did before, that
is, delete all keyframes of the selected object and in pose-mode also
of selected bones.
|
|
|
|
This node creates a poly spline line in one of 2 modes:
- Line between two points
- Start Point, Direction, and Length
Both modes create splines with only start and endpoints.
A resample node can be used afterward to increase the point count.
Differential Revision: https://developer.blender.org/D11769
|
|
This patch adds a very simple node that explicitly converts a float to
an int. While this may seem redundant, it would offer 2 benefits to the
current requirement to use implicit float conversions:
1. It makes the node tree's intent more clear and self-documenting
(especially if changes in the future require integer inputs).
2. It eliminates undefined behavior in current/future nodes from float
inputs by guaranteeing that the input is an integer.
The node offers a variety of rounding techniques to make it more flexible.
Differential Revision: https://developer.blender.org/D11700
|
|
|
|
This adds a viewer node similar to the one in the compositor.
The icon in the headers of nodes is removed because it served
the same purpose and is not necessary anymore.
Node outputs can be connected to the active viewer using
ctrl+shift+LMB, just like in the compositor. Right now this collides
with the shortcut used in the node wrangler addon, which will
be changed separately.
As of now, the viewed geometry is only visible in the spreadsheet.
Viewport visualization will be added separately.
There are a couple of benefits of using a viewer node compared
to the old approach with the icon in the node header:
* Better support for nodes that have more than one geometry output.
* It's more consistent with the compositor.
* If attributes become decoupled from geometry in the future,
the viewer can have a separate input for the attribute to visualize.
* The viewer node could potentially have visualization settings.
* Allows to keep "visualization points" around by having multiple
viewer nodes.
* Less visual clutter in node headers.
Differential Revision: https://developer.blender.org/D11470
|
|
This constraint can be naturally viewed as a prototype for a future
4x4 matrix math node (or subset thereof), since its basic semantics
already is matrix assignment. Thus it makes sense to add math options
to this constraint to increase flexibility in the meantime.
This patch adds support for several operations that would be useful:
- An option to remove shear in the incoming target matrix.
Shear is known to cause issues for various mathematical operations,
so an option to remove it at key points is useful.
Constraints based on Euler like Copy Rotation and Limit Rotation
already have always enabled shear removal built in, because their
math doesn't work correctly with shear.
In the future node system shear removal would be a separate node
(and currently Limit Rotation can be used as a Remove Shear constraint).
However removing shear from the result of the target space conversion
before mixing (similar to Copy Rotation) has to be built into
Copy Transforms itself as an option.
- More ways to combine the target and owner matrices.
Similar to multiple Inherit Scale modes for parenting, there are
multiple ways one may want to combine matrices based on context.
This implements 3 variants for each of the Before/After modes
(one of them already existing).
- Full implements regular matrix multiplication as the most basic
option. The downside is the risk of creating shear.
- Aligned emulates the 'anti-shear' Aligned Inherit Scale mode,
and basically uses Full for location, and Split for rotation/scale.
(This choice already existed.)
- Split Channels combines location, rotation and scale separately.
Looking at D7547 there is demand for Split Channels in some cases,
so I think it makes sense to include it in Copy Transforms too, so that
the Mix menu items can be identical for it and the Action constraint.
Differential Revision: https://developer.blender.org/D9469
|
|
Address initial feedback:
- Use checkboxes instead of radio buttons
- Hide snapping distance control from UI
- Tweak snapping line color - use selected strip color, 50% transparency. Similar to other editors
- Draw 2px thick line, since strip outline is also 2px thick
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D11759
|
|
This node has two modes: the first mode computes a circle from three
locations and a resolution. The second takes radius and resolution.
The first mode also outputs the center of the computed circle as
a vector.
Differential Revision: https://developer.blender.org/D11650
|
|
Creates a Curve with 1 Bezier Spline from four positions (start,
start handle, end handle, end) and a resolution. The handles are
aligned and mirrored automatically. An "Offset" mode is also included
to allow specifying the handles relative to the control points.
The default settings recreate the existing default Bezier Curve in the
3D viewport add menu.
Differential Revision: https://developer.blender.org/D11648
|
|
This patch is for a node that creates a poly spline from a
3 point quadratic Bezier. Resolution is also specified.
Curve primitives design task: T89220
Differential Revision: https://developer.blender.org/D11649
|
|
This node creates a curve spline and gives control for the number of
rotations, the number of points per rotation, start and end radius,
height, and direction. The "Reverse" input produces a visual change,
it doesn't just change the order of the control points.
Differential Revision: https://developer.blender.org/D11609
|
|
This patch adds a Curve Primitives menu in Geometry nodes with an
initial entry of a star primitive.
The node is a basic star pattern node that outputs a poly spline.
Options control the inner and outer radius, the number of points,
and the twist of the valleys.
Differential Revision: https://developer.blender.org/D11653
|
|
Change snapping behavior to snap strip edges when they are close to snap point.
Default behavior is, that each transformed strip is snapped to any other strip.
Implement snapping controls in sequencer tool settings. These controls include:
- Snapping on/off
- Ability to snap to playhead and strip hold offset points
- Filter snap points by excluding sound or muted strips
- Control snapping distance
Snapping controls are placed in timeline header similar to 3D viewport
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11646
|
|
Mask value works just like transparency mask.
You are able to select intersection lines inside a
collection or, between collections.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11309
|
|
This adds a new Attributes panel in the mesh properties editor.
It shows a list of all the generic attributes on the mesh.
In the future, we want to show built-in and other attributes in the
list as well. Related technical design tasks: T88460, T89054.
There is also a new simple name collision check that warns the user
when there are multiple attributes with the same name. This can be
problematic when the attribute is supposed to be used in geometry
nodes or during rendering.
Differential Revision: https://developer.blender.org/D11276
|
|
This was a stupid mistake in my original commit that added this item.
While this is an API breakage, the name is simply wrong, and it is only
6 months old, and slightly niche.
Differential Revision: https://developer.blender.org/D11701
|
|
This patch adds a function where you can specify occlusion effectiveness from 0 to 255 layers per face for a given mesh material.
Reviewed By: Sebastian Parborg (zeddb)
Ref D11308
|
|
CollectionLineart does not care about the configurations
in master collection.
Other options are not applicaple for master collection as well.
Hence hiding it.
Reviewed by Dalai Felinto (dfelinto)
Differential Revision: https://developer.blender.org/D11702
|
|
This option allow users to see the view layer in context to the
others. It is particularly useful to see which view layers have which
collections enabled, and their render settings (holdout, ...).
This option is off by default.
Differential Revision: https://developer.blender.org/D11708
|
|
Adds "PrefersNonDefaultGPU" and "X-KDE-RunOnDiscreteGpu" to the .desktop file.
Similar hints for macOS and Windows exist already, to prefer using a dedicated
GPU over a slower integrated GPU.
See: https://gitlab.freedesktop.org/xdg/xdg-specs/-/merge_requests/13
Differential Revision: https://developer.blender.org/D11643
|
|
This patch adds a left aligned sidebar to the spreadsheet editor. This
Sidebar can be used to navigate the geometry component types and
attribute domains. It also provides a quick overview of domain sizes.
It replaces the two dropdowns in the regions header.
Next step will be to add the domain cycling shortcut
using the CTRL + mouse wheel.
Reviewer: Dalai Felinto (dfelinto), Julian Eisel (Severin),
Hans Goudey (HooglyBoogly).
Differential Revision: https://developer.blender.org/D11046
|
|
For scenes that have a lot of edges, this could potentially
save some time generating individual strokes that are outside
camera frustum.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11525
|
|
682a74e0909ba renamed Bendy Bones properties and replaced existing float
properties with float-vector properties. This updates the property names used
by the action baking operator (`NLA_OT_bake`).
|
|
Previously the smooth shading of the voxel remesher was controlled by a
mesh property. With this change, the output will try to match the
current shading of the object. This only takes into consideration the
shading mode of the first polygon of the model, but it is probably what
most users expect as it works as intended with the shade smooth/flat
object mode options.
Reviewed By: JulienKaspar, JacquesLucke
Differential Revision: https://developer.blender.org/D11626
|
|
Fix T88808.
Caused by {rB5f2c5e5bb8c15bf0d6679351e3482f9c38c00935}
object type for `TEXT object` was missing in following check
that's why `Set Origin` option was lost from object context menu.
Reviewed By: lichtwerk
Maniphest Tasks: T88808
Differential Revision: https://developer.blender.org/D11495
|
|
|
|
This patch fixes many minor spelling mistakes, all in comments or
console output. Mostly contractions like can't, won't, don't, its/it's,
etc.
Differential Revision: https://developer.blender.org/D11663
Reviewed by Harley Acheson
|
|
|
|
8aa17c5b12d734332c0af62a110524c4e523fb64 missed removing the
menu definition when removing from the UI.
|
|
This commit piggybacks on rB3e695a27cdfad560d0b28e742cfa069d098200d6
|
|
detailed explanation of the issue and may help the Addon Developer to identify what exactly needs to be changed.
The current message 'addon not loaded' is a bit too sparse.
Differential Revision: https://developer.blender.org/D11655
|
|
Caused by improper testing on my part, assuming a helper function
existed in the industry compatible keymap file, and also assuming it
also used the N and T keys for the left and right side-regions.
|
|
This patch adds support for filtering rows based on rules and values.
Filters will work for any attribute data source, they are a property
of the spreadsheet rather than of the attribute system. The properties
displayed in the row filter can depend on data type of the currently
visible column with that name. If the name is no longer visible, the
row filter filter is grayed out, but it will remember the value until
a column with its name is visible again.
Note: The comments in `screen.c` combined with tagging the sidebar
for redraw after the main region point to a lack of understanding
or technical debt, that is a point to improve in the future.
**Future Improvements**
* T89272: A search menu for visible columns when adding a new filter.
* T89273: Possibly a "Range" operation.
Differential Revision: https://developer.blender.org/D10959
|
|
Currently B-Bone scaling can only be controlled via their
properties, thus requiring up to 8 drivers per joint between
B-Bones to transfer scaling factors from the handle bone.
A Scale Easing option is added to multiply the easing value
by the Y scale channels to synchronize them - this produces a
natural scaling effect where both the shape of the curve and
the scale is affected.
In addition, four toggles are added for each handle, which
multiply each of the X, Y, Z and Ease values by the matching
Local Scale channel of the handle bone, thus replacing trivial
drivers. The Scale Easing option has no effect on this process
since it's easy to just enable both Length and Ease buttons.
Differential Revision: https://developer.blender.org/D9870
|
|
In addition to the base bone transformation itself, B-Bones have
controls that affect transformation of its segments. For rotation
the features are quite complete, allowing to both reorient the
Bezier handles via properties, and to control them using custom
handle bones. However for scaling there are two deficiencies.
First, there are only X and Y scale factors (actually X and Z),
while lengthwise all segments have the same scaling. The ease
option merely affects the shape of the curve, and does not cause
actual scaling.
Second, scaling can only be controlled via properties, thus
requiring up to 6 drivers per joint between B-Bones to transfer
scaling factors from the handle bone. This is very inefficient.
Finally, the Z channels are confusingly called Y.
This commit adds a B-Bone Y Scale channel and extra B-Bone flag
fields to DNA with appropriate versioning (including for F-Curves
and drivers) in preparation to addressing these limitations.
Functionality is not changed, so the new fields are not used
until the following commits.
Differential Revision: https://developer.blender.org/D9870
|
|
This patch ensures that selection mode flushing updates total selection
counts internally. This reduces recounting when we are sure that the
input total selection counts were up to date.
For example for circle selection the total selection counts were
correct. But during flushing the selection could have been changed and
therefore the selection was always recounted.
This increased the performance on selected system from 6.90 FPS to 8.25
FPS during circle selection operations.
Before: {F10179981}
After: {F10179982}
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11647
|
|
The //Raycast// node intersects rays from one geometry onto another.
It computes hit points on the target mesh and returns normals, distances
and any surface attribute specified by the user.
A ray starts on each point of the input //Geometry//. Rays continue
in the //Ray Direction// until they either hit the //Target Geometry//
or reach the //Ray Length// limit. If the target is hit, the value of the
//Is Hit// attribute in the output mesh will be true. //Hit Position//,
//Hit Normal//, //Hit Distance// and //Hit Index// are the properties of the
target mesh at the intersection point. In addition, a //Target Attribute//
can be specified that is interpolated at the hit point and the result
stored in //Hit Attribute//.
Docs: D11620
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D11619
|
|
This node creates splines with more control points in between the
existing control points. The point is to give the splines more
definition for further tweaking like randomization with white noise,
instead of deforming a resampled poly spline with a noise texture.
For poly splines and NURBS, the node simply interpolates new values
between the existing control points. However, for Bezier splines,
the result follows the existing evaluated shape of the curve, changing
the handle positions and handle types to make that possible.
The number of "cuts" can be controlled by an integer input, or an
attribute can be used. Both spline and point domain attributes are
supported, so the number of cuts can vary using the value from the
point at the start of each segment.
Dynamic curve attributes are interpolated to the result with linear
interpolation.
Differential Revision: https://developer.blender.org/D11421
|
|
Implementation of T86970. This node takes a geometry input with
multiple components and outputs them by component type. Meshes,
Curves, and Point Clouds support combining multiple input instances,
while volumes will only output the first volume component input until
suitable instance realization for multiple volumes is finished.
When direct geometry instancing is implemented it will be possible to
avoid realizing instances in this node.
Differential Revision: https://developer.blender.org/D11577
|
|
|
|
|
|
|
|
Also remove unused argument.
|
|
This is an implementation of T88722. It accepts a curve object and
for each spline, reverses the order of the points and all attributes.
This is more of a foundational node to support other nodes in the
future (like curve deform)
Selection takes spline domain attributes to determine which splines
are selected. If no selection is present all splines are reversed.
Differential Revision: https://developer.blender.org/D11538
|
|
This node implements the second option of T87429, creating points
along the input splines with the necessary evaluated information
for instancing: `tangent`, `normal`, and `rotation` attributes.
All generic curve point and spline attributes are copied to the
result points as well.
The "Count" and "Length" methods are just like the current options
in the resample node, but the output is points instead of a curve.
The "Evaluated" method uses the points you see on the curve directly,
and therefore should be the fastest.
The rotation data is retrieved from a transform matrix built with the
same method that the curve to mesh node uses. The radius attribute is
divided by 10 so the points don't look absurdly huge in the viewport.
In the future that could be an option.
For the implementation, one thing that could use an improvement
is the amount of temporary allocations while resampling to evaluated
points before the final points. I expect that reusing a buffer for
each thread would give a nice improvement.
Differential Revision: https://developer.blender.org/D11539
|
|
This patch allows Windows users to specify that their current blender
installation should be used to create thumbnails and be associated
with ".blend" files. This is done from Preferences / System. The only
way to do this currently is from the command-line and this is sometimes
inconvenient.
Differential Revision: https://developer.blender.org/D10887
Reviewed by Brecht Van Lommel
|
