Age | Commit message (Collapse) | Author |
|
|
|
This was already the case for curve & armature.
|
|
As the 'M' key is free, it's convenient to use for the merge menu,
especially since this contains "Merge by Distance",
a frequently used action.
Use 'Alt-M' for a new split menu, following our convention of Alt being
used for opposite functionality.
Also move merge/split menu's into the "Mesh" menu as neither operate
solely on a single mesh element type.
|
|
This matches select linked for other modes (curve, mesh)
|
|
The option only makes sense for gas domains where there is some density.
|
|
This was crashing, when looking into a fix I noticed that it gave
hap-hazard results dissolving past forks in the parent/child hierarchy
arbitrarily following one chain.
This functionality is almost identical to "dissolve" which delimits
forks in the chain predictably.
So remove this in favor of dissolve (available from the delete menu).
|
|
|
|
Match names between the redo popup and the menu item.
|
|
This works for all selection modes,
include last below a separator since it's a specialized function.
Note that the previous commit was raising an exception as operator
properties don't support 'or'.
|
|
|
|
|
|
Differential Revision: https://developer.blender.org/D7263
|
|
The button seems to behave more as I'd expect without these
additional checks. Previously, the button was often grayed out when
it was actually working.
Reviewers: ISS
Differential Revision: https://developer.blender.org/D7252
|
|
|
|
|
|
This commit introduces a new mode for calculating the positions and
weights of the IK segments in the Pose Brush based on the Face Sets.
The first segment of the chain will always include all face sets inside
the brush radius and it will propagate until the boundary of the last
face sets added in the flood fill. Then consecutive connected face sets
are added to the chain until the chain length limit is reached or all
face sets of the mesh are already part of the chain.
This feature enables complete control over the pose brush origins in
case that is needed. Also, with this mode, the user can have a library
of base meshes with face sets already configured to get to the initial
pose as fast as possible.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7235
|
|
|
|
|
|
This commit aims to add functionality to the surface deform modifier that
gives more control and allows it to work better with the modifier stack.
* Maintains compatibility with older files. The default settings keep it
so that the whole object is bound and vertex coordinates get overwritten
as the modifier currently does.
* Turns the deformations from an absolute vertex coordinate overwrite into
an additive offset from the vertex location before the modifier to the
resulting bound deformation. This gives the ability to control the
strength of the deformation and mix the deformation of the modifier
with the modifier stack that comes before it.
* Also adds in a vertex group with the invert option. This is applied after
the bind deformation is added. So the whole object is still bound to target,
and the vertex group filters afterwards what parts get affected.
I experimented with a version to only binds the geometry weighted to the
vertex group, but that would break compatibility with old files.
I may bring it in later as a separate option/mode for the surface deform.
With several fixes from @mont29.
Reviewed By: mont29
Differencial Revision: https://developer.blender.org/D6894
|
|
This parameter was used in previous version and must be removed from UI panel.
|
|
vertex groups.
This commit gives the solidify modifier the ability to assign the newly created shell
and rim geometries to selected vertex groups. This expands the procedural control over
the modifier stack by letting users apply modifiers to the shell geometry without affecting
the original geometry.
This will be especially helpful for NPR users that use solidify to create backface
culling lines on their characters giving them the ability to add displace noise
and other effects.
Differential Revision: https://developer.blender.org/D6903
|
|
This commit adds the option to use armature bones for the From and To targets
when using armature objects.
The changes are based on the UV Warp modifier.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D6820
|
|
Leftover from rB3b59c111821b.
|
|
- Use addon keyconfig for registered tools so reloading the keymap
doesn't clear them.
- Ensure there is a default keymap, needed for addon keymaps
to be available in the user keyconfig.
|
|
Differential Revision: https://developer.blender.org/D7223
|
|
See rB337e86148688aa608d007381ee9ca78879050754
|
|
It appears this slipped through the code review
Reviewed By: sebbas
Differential Revision: https://developer.blender.org/D6760
|
|
This implements a new mode in the Face Sets Create operator to create a
new face sets from the faces selection in edit mode. This can be used
when the user considers that the edit mode tools are more convenient for
a more precise control or a certain type of selection, like creating a
face set from a face loop.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7211
|
|
This operator initializes all face sets in the sculpt at once using
different mesh properties. It can create face sets by mesh connectivity,
material slots, face normals, UV seams, creases, sharp edges, bevel
weights and face maps.
For properties that are already in the faces, this is implemented as a
loop. Properties that depend on edge attributes use a similar operation
to sculpt flood fill, but using face adjacency instead of edge vertex
connectivity.
As Multires also stores the face sets in the base mesh, this should work
in the face sets Multires implementation without any changes.
This is implemented as a separate operator as this resets the visibility
and creates all face sets at once, while the create face set operator
creates a single face sets, leaving the rest of the face sets in the
mesh as they are.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7209
|
|
This implements the Surface Smooth Brush as a mode inside the Smooth tool,
which uses the HC algorithm from "Improved Laplacian Smoothing of Noisy Surface Meshes".
Comparted to the regular smooth brush with laplacian smooth, this brush removes
the surface while preserving the volume of the object.
The smooth result can be controlled by tweaing the original shape preservation,
displacement and iteration count.
The same surface smooth operation is also available as a mesh filter.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7057
|
|
The threshold only must be vsisible in Segment mode.
|
|
|
|
There is no need to have another font embedded in the Blender executable, we
can assume the bundled font exists. In the future we may provide a fallback
if the font specified by the user in the preferences is missing a character,
but that can use our bundled international font.
Differential Revision: https://developer.blender.org/D6854
|
|
This means Blender can display more text correctly without having to enable
user interface translation. Previously the quality of the font was lower,
but that has been fixed now.
The font files have now been ungzipped, which results in faster file loading
as Freetype can read only the parts of the file that it needs. Blender download
size should not increase since the release package is compressed.
This includes improvements for Cyrillic characters from the latest DejaVu
Sans fonts from D6960, contributed by Harley Acheson. Fixes T74097.
Differential Revision: https://developer.blender.org/D6854
|
|
|
|
This commit adds the option to invert the resulting weights of the
falloff curve.
There is a workflow used by some to convert a texture mask into
vertex weights by using a custom curve and inverting the points.
This allows the same effect with a single click, and gives the modifier
more procedural functionality.
With minor UI tweaks by @mont29.
Differential Revision: https://developer.blender.org/D6899
|
|
Include technical operators here so they're available
when using menu-search.
|
|
This has some advantages over operator search:
- Some operators need options set to be usefully accessed.
- Shows key bindings to access menus
(for actions that don't have key bindings themselves).
- Non operator actions such as check-boxes are also shown.
- Menu items can control execution context, using invoke or execute
where appropriate so we can control how the operator runs.
Part of the design task T74157.
This can be tested using the 'Experimental' preferences section
or selected in the key-map editor.
|
|
Planar object now have a thickness by default. This should make it more intuitive for users as there is no need to specify an object thickness.
|
|
This patch adds ability to set up colors and size of background
(transparency) checkerboard pattern in viewport and 2d editors. No new
backgrounds, only changing colors in existing ones.
This is not the background of the viewport, it is a transparency
checkerboard that is turned on only in render mode, when the
transparency mode is on. And also in 2D-editors, (image, sequencer,
etc).
Reviewed By: Pablo Vazquez, Julian Eisel
Differential Revision: https://developer.blender.org/D6791
|
|
|
|
Add new option to change the stroke hardeness. This option works at stroke level, not at point level.
Also replaced the "Both" name mode by "Stroke and Fill".
Differential Revision: https://developer.blender.org/D7195
|
|
This is a follow up on rBa1e50cfe6b4dbc360b6118c63a0dc7445023c37b
|
|
Because some OSs are still using old 8bits specific encodings... Angry
eye @windows...
|
|
Avoids possible final object shape destruction since those options
defines how displacement is applied and propagated.
|
|
Differential Revision: https://developer.blender.org/D7149
|
|
Differential Revision: https://developer.blender.org/D7161
|
|
|
|
Especially when expanding the UI panel horizontally, there were some problems with empty space.
|
|
Also correct gizmo_view_align color.
|