Age | Commit message (Collapse) | Author |
|
context menu
Collection holdouts are now supported by eevee.
Maniphest Tasks: T87715
Differential Revision: https://developer.blender.org/D11233
|
|
Remove the V key for switching to vertex mode in Weight Paint mode
as it caused a key-conflict.
Ref D11192
|
|
Update the "current value" of the Shape Key blend amount when value is
not within the min/max range. New function `rna_ShapeKey_update_minmax`
used to update and clamp the current value.
Reviewed By: mano-wii, lichtwerk, #animation_rigging, sybren
Maniphest Tasks: T54339
Differential Revision: https://developer.blender.org/D11071
|
|
The Cycle-Aware Keying option was added in 2.8 and is used
to allow keyframing over cyclic F-Curves without disturbing
the cycle (e.g. overwriting an end keyframe updates both ends).
This effect is not limited to auto keyframing and is applied
to any key insertion, but when the popovers were rearranged
it was put in the Auto-Keyframing related one for some reason.
This is misleading, especially since because of that the
option is incorrectly greyed out when auto keyframing is
disabled, so move it to the generic Keyframing popover.
Differential Revision: https://developer.blender.org/D11213
|
|
the mode
This option should always be available. Even if it does not affect the
current object depending on its mode, it affects the rest of the geometry
of the scene.
The rest of the options also work this way. For example, a grease pencil
object does not have face orientation, but the ovelay option is still
there for the rest of the scene.
Reviewed By: JulienKaspar, HooglyBoogly
Maniphest Tasks: T83398
Differential Revision: https://developer.blender.org/D10215
|
|
Partial fix for T81751 which exposes multiple playback performance
issues. Previously the cache was limited to 30 frames, without a way to
increase the cache for smooth playback with files that are slow to load.
Now the animation plays back smoothly once loaded into cache.
The cache limit from the system preference is used
when the player is launched from Blender.
A new player argument `-c <cache_limit>` was added to support this.
|
|
certain modes
Reported for ops.transform.vertex_warp and ops.transform.vertex_random.
Polling will check with ED_transverts_check_obedit, if we know it will
fail e.g. for pose mode, we can do the same check in the UI already.
Maniphest Tasks: T87926
Differential Revision: https://developer.blender.org/D11128
|
|
|
|
Replace the existing extension instead of adding it.
|
|
These settings are used though for these strokes (see
'paint_stroke_use_dash'), should be visible in the UI as well.
This was correctly added when dashing was introduced in rB15f82278d5d4
btw., but then messed up in rBfb74dcc5d69d.
Maniphest Tasks: T87816
Differential Revision: https://developer.blender.org/D11096
|
|
|
|
This gets rid of a `DeprecationWarning` in bpy_types.py caused by invalid escape sequences.
More info here: https://docs.python.org/3/library/re.html
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D10998
|
|
In cases where the same node tree is used in different materials with
small changes, the wrong material could be selected.
Cause: Hair shaders GPU resources weren't updated and used the previous bound data.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D11036
|
|
This was another error in rBac90c8a7743f. It turns out it's quite
important to use a full build to save the file, which I didn't do then.
|
|
Differential Revision: https://developer.blender.org/D10993
|
|
`make lite` does not use audaspace, so some files will pollute the console with
tons of warnings about audio values not defined.
Reviewed By: nexyon, campbellbarton
Differential Revision: https://developer.blender.org/D10981
|
|
This was a mistake in rBac90c8a7743f6d0
|
|
Credit: Erindale Woodford - youtube.com/erindale /
twitter.com/erindale_xyz
|
|
Since these were added, we decided that builtin and reserved name
attributes start with a lowercase letter. We also use "id" already in
a few nodes, so this change will be consistent with that.
|
|
When inserting a node on top of a link, the multi input socket
indices weren't updated. This fixes that and keeps the relative
order of the links the same.
Author: Wannes Malfait
Reviewed By: Fabian Schempp
Differential Revision: https://developer.blender.org/D10969
|
|
This introduces a context path to the spreadsheet editor, which contains
information about what data is shown in the spreadsheet. The context
path (breadcrumbs) can reference a specific node in a node group
hierarchy. During object evaluation, the geometry nodes modifier checks
what data is currently requested by visible spreadsheets and stores
the corresponding geometry sets separately for later access.
The context path can be updated by the user explicitely, by clicking
on the new icon in the header of nodes. Under some circumstances,
the context path is updated automatically based on Blender's context.
This patch also consolidates the "Node" and "Final" object evaluation
mode to just "Evaluated". Based on the current context path, either
the final geometry set of an object will be displayed, or the data at
a specific node.
The new preview icon in geometry nodes now behaves more like
a toggle. It can be clicked again to clear the context path in an
open spreadsheet editor.
Previously, only an object could be pinned in the spreadsheet editor.
Now it is possible to pin the entire context path. That allows two
different spreadsheets to display geometry data from two different
nodes.
The breadcrumbs in the spreadsheet header can be collapsed by
clicking on the arrow icons. It's not ideal but works well for now.
This might be changed again, if we get a data set region on the left.
Differential Revision: https://developer.blender.org/D10931
|
|
This will hopefully make it faster to start using the node editor.
The workspace also includes the spreadsheet. Note that while
existing startup files won't have this workspace added, it will be
in the list of options when clicking on the "add workspace" button.
Ref T86499
|
|
Within the 2D Animation workspace, the 'Cursor' dropdown currently displays the 'Display Cursor' incorrectly aligned.
This change fixes the alignment issue.
Reviewed By: #user_interface, #grease_pencil, antoniov
Differential Revision: https://developer.blender.org/D10614
|
|
Some operations may use no preferredResolution ({0, 0}) when calling determineResolution on inputs to check if they have resolution on their own. See MixOperation or MathOperation determineResolution implementation. In such cases {0, 0} resolution ends up being set when an input doesn't have own resolution, breaking propagation of the original preferredResolution. They don't mean to set it as resolution, it's just a check.
This patch only allows to set valid resolutions (>0). When it's 0 it may be understood as "No preferred or determined resolution" so it should not be set to give output operations another chance of finding a proper resolution by calling determineResolution again with a different preferredResolution.
Test file:
{F9932526}
Reviewed By: #compositing, jbakker
Differential Revision: https://developer.blender.org/D10972
|
|
This implements the changes discussed in T87134 for including switch
object funcionality in 2.93. This includes:
- Remove the switch object operator experimental option
- Remove the option for switching objects in Edit Mode.
- Rename switch_object to transfer_mode.
- Enable the operator only in sculpt mode.
- Expose the operator in the Sculpt menu with an eyedropper modal
option.
On later releases, we could revisit enabling the operator in other mode
and object types as well as its place in the UI.
Reviewed By: JulienKaspar, JacquesLucke
Differential Revision: https://developer.blender.org/D10953
|
|
Sculpt menus were using the legacy expand operator. This updates all
entries to use the new one.
It does not make sense to use Expand from the menus as it relies on the
brush cursor position, but now all Expand shortcuts are listed in the
UI.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10952
|
|
This commit cleans up the RNA names of select mirror operators so that
they are all "Select mirror".
This makes the select menu in edit/pose mode consistent regardless of
object type.
Differential Revision: https://developer.blender.org/D7356
|
|
|
|
|
|
|
|
Add missing modes as reported in T87117 bug report.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10885
|
|
This is a minimal, information-only view currently, listing by default
all the override data-blocks, with their user-edited override
properties.
System-generated overrides (like the overrides of pointers to other
override data-blocks) can be shown through a filter option.
Finally, potential info or warning messages from (auto-)resync propcess
are also shown, as an icon + tooltip next to the affected items.
Part of D10855.
|
|
This is caused by rB9f323e9bf79f. When hover shortcuts are used,
we cannot use the modifier from the context (which will be the
active modifier), or they won't be hover shortcuts anymore!
There didn't use to be an editor-level "modifier" context variable,
which is why this worked before.
The fix is simple, just specify the modifier name for this particular
remove button.
Differential Revision: https://developer.blender.org/D10870
|
|
This commit adds a simple node to output the min and max of an
axis-aligned bounding box for the input geometry, as well a rectangular
prism mesh created from these values for convenience.
The initial use case for this node is a "bounding box boolean", where
doing the boolean with just a bounding box could be signigicantly
faster, for cases like cutting a hole in a wall for a window. But it's
easy to imagine other cases where it could be useful.
This node supports mesh and point cloud data right now, volume support
will come as a separate patch. Also note that there is plenty of room
to improve the performance of this node through parallelization.
Differential Revision: https://developer.blender.org/D10420
|
|
* Add Fast GI / AO bounces to presets
* Add Default preset matching defaults
* Add Fast Approximate GI preset
* Lower Full GI depths to 32
|
|
Before this change, you could have the new sculpt symmetry code and the
older weight paint symmetry code active at the same time. This would
lead to users easily trashing their weigh paint data if they were not
careful when switching between modes.
Now the specific weight paint symmetry code is an exclusive toggle so
the user can't accidentally mirror strokes and vertex groups at the same
time. This also paves the way of supporting Y and Z symmetry in the
future for weight groups mirroring if we decide to add it in the future.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D10426
|
|
The following primitives needed ME_EDGEDRAW, ME_EDGERENDER edge flags:
* Grid
* Circle
Set flags on the inside edges for grid and circle triangle fan (mesh primitive nodes)
so they are visible and selectable.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D10878
|
|
Use utility functions to decompose data paths and resolve the
RNA property from a data-path.
Replaces in-line string manipulation and RNA access.
This allows more complex data paths to be used, where previously string
literals in a data path could break the simple data-path handling logic.
|
|
Utility function for splitting an RNA path, to be used by `bpy.ops.wm.*`
|
|
Converting functions with single arguments to a string
added an additional comma.
|
|
Generic context operators now look-up the RNA properties to extract
their description (when it's available).
Add `bl_rna_utils.data_path.property_definition_from_data_path()`
to handle the details of accessing the RNA property definition.
|
|
Use the same string escaping logic shared by RNA path resolving code.
|
|
Display the bone axes at the head (root) of the bone by default, instead
of the tail (tip), and add a slider so that it's possible to adjust this
position.
Versioning code is in place to ensure existing files behave the same
(axes shown at tail), whereas new Armatures will be using the new
default (axes shown at head).
Reviewed By: #animation_rigging, #user_interface, Severin, Sybren
Differential Revision: https://developer.blender.org/D7685
|
|
It should set bl_order to show below panels registered by render engine add-ons
like Cycles.
|
|
Since a few releases it is possible to process Blenders images much
more effficiently than before thanks to the `foreach_get`/`foreach_set`
methods. This new template shows how those methods can be used together
with numpy.
Differential Revision: https://developer.blender.org/D9400
|
|
This is functionality that isn't accessible via the user interface. The
API allows the creation and modification of an override template that
holds rules that needs to be checked when overriding the asset.
The API is setup that it cannot be changed after creation. Later on when
the system is more mature we will allow changing overrides operations.
NOTE: This is an experimental feature and should not be used in productions.
Reviewed By: mont29, sebbas
Differential Revision: https://developer.blender.org/D10792
|
|
This is an implementation of Enhanced Subpixel Morphological Antialiasing (SMAA)
The algorithm was proposed by:
Jorge Jimenez, Jose I. Echevarria, Tiago Sousa, Diego Gutierrez
This node provides only SMAA 1x mode, so the operation will be done with no spatial
multisampling nor temporal supersampling. See Patch for comparisons.
The existing AA operation seems to be used only for binary images by some other nodes.
Using SMAA for binary images needs no important parameter such as "threshold", so we
perhaps can switch the operation to SMAA, though that changes existing behavior.
Notes:
1. The program code assumes the screen coordinates are DirectX style that the
vertical direction is upside-down, so "top" and "bottom" actually represent bottom
and top, respectively.
Thanks for Habib Gahbiche (zazizizou) to polish and finalize this patch.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D2411
|
|
For projection painting tools besides the `DRAW` tool:
- Don't show the texture from viewport stencil drawing.
- Don't show the texture panel.
Based on D10564 by @lichtwerk with own changes.
|
|
This matches cursor center operator from the 3D view.
Reviewed By: campbellbarton
Resolves T70142
Ref D8271
|
|
Although "Grid" may not be techincally correct since a grid could be 3D,
it was decided to rename the "Plane" primtive to "Grid". The primitive
node allows subdivisions, so the name is more consistent with the
operator in the 3D view.
Ref T86819
This commit includes a file subversion bump for the versioning.
|