Age | Commit message (Collapse) | Author |
|
The mesh can be freed by BKE_mesh_nomain_to_mesh(), so we need to get
the `ME_AUTOSMOOTH` flag before that call, and not after.
|
|
Meshroom writes two hierarchies to Alembic, one rooted at
`/mvgRoot/mvgCameras` and the other at `/mvgRoot/mvgCamerasUndefined`.
These paths have no schema definition, and thus are ignored by Blender.
The cameras themselves have those schemaless paths as parent, and have
their transforms marked as "inherited", e.g. relative to their parent.
As these cameras have no valid parent, there is no Blender object to use
to convert their local matrices to world matrices, and Blender just
decided to reset them to the unit matrix.
Now "inherited" transforms without a parent in Blender are interpreted
as world transforms. Reparenting those objects to a Blender object will
re-interpret the transforms as local to the parent again.
|
|
T68035 by @luzpaz
|
|
|
|
|
|
When the mesh is using custom normals, those should always be exported,
regardless of the `ME_SMOOTH` flag on the invidivual polys.
Also replaced the loop normal writing with the same logic as we use for
reading (less pointer arithmetic, more normal counting).
|
|
Loop normals are called 'Face-varying normals' in Alembic. Before this
commit, the existence of such normals was used to enable smooth shading.
This is incorrect, as the normals could encode flat faces just as well.
This commit adds the loading of these normals as custom loop normals. It
then also enables Auto-Smoothing on the mesh (which is a bit of a
misnomer and indicates to Blender that the custom normals should be
used).
Fixes the glitching described in T65959.
Differential Revision: https://developer.blender.org/D5191
|
|
The name now indicates what happens when the variable is set to true.
No functional changes.
|
|
The only thing that is stored in this pointer is a `Mesh*`, and casting
it from/to `void*` is unnecessary and confusing. Maybe the entire
CDStreamConfig class could/should be removed at some point.
No functional changes.
|
|
By having a switch statement that lists all the values of the enum, it is
clear which cases we're not handling, and it also allows for warnings in
the future when the enum expands.
No functional changes.
|
|
No functional changes.
|
|
The `poly_start` parameter was always 0, so adding it to a poly index
from Alembic is a no-op.
No functional changes.
|
|
The w-component of the translation column of the scaled matrix wasn't
set to 1.0, which, apart from being incorrect, caused drawing problems.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5290
|
|
When the object we iterate over is not part of the depsgraph, we cannot
get the evaluated copy to export. This workaround is temporary to avoid
a BLI_assert() failure getting the evaluated mesh of this object.
This will be handled more elegantly in the new AbstractHierarchyIterator
that I'm working on, but that requires a bigger change than we should
allow this close to the 2.80 release candidate.
This fixes a problem described in T58686.
|
|
These were just some missing nullptr checks.
|
|
The velocities std::vector was allocated in too narrow a scope, causing
use-after-free errors.
|
|
CDData checking on file load was not taking into account deprecated
CD_MTEXPOLY datatype, which unfortunately shows same weird glitch as
CD_PAINT_MASK and CD_FACEMAP ones...
Note that it was annoying (due to amount of warnings in console), but
totally harmless, since that data type is just deleted anyway.
This commit also generally cleans up the CD_MTEXPOLY deprecation code, we
have a system to handle that, let's use it, instead of defining local
static values to replace it...
|
|
Leave the reader to be created on the CoW object in the depsgraph evaluation,
don't assign the one used for importing to the original object.
|
|
This fixes an issue introduced in 4337bc2e6303dbd5f295878f3e7490995a62713a.
|
|
An Alembic file saved by 3DS Max caused Blender to crash when importing.
Either the UV indices in the file are out of bounds or they are written
in a way we don't expect. In either case, this now no longer causes Blender
to crash.
|
|
There is now a checkbox to enable/disable depth of field per camera. For Eevee
this replace the scene level setting. For Cycles there is now only an F-Stop
value, no longer a Radius.
Existing files are converted based on Cycles or Eevee being set in the scene.
Differential Revision: https://developer.blender.org/D4882
|
|
No major API change here, only in the outliner restriction column
variables (e.g., show_restrict_column_selectable > show_restrict_column_select).
* Get rid of _INSTANCE (introduced on b1af68200159).
* Differentiate (everywhere but the API) between HIDE (temporary) and VIEWPORT (global).
* Use the expected icon for restrict viewport (same as objects and modifiers).
* selectable > select
|
|
See T61578 for discussions and mockups.
Visibility Options
==================
We are adding more granular control over restriction columns in the outliner,
exposing "indirect only" and "holdout" as options, and change the way
users enable/disable collections in a viewlayer.
We also rename the object viewport restriction to hide instance.
So the options we have are:
Collection
----------
* Render Visibility
* Instance Visibility
* Selectable
(View) Layer Collection
-----------------------
* Enable
* Holdout
* Indirect Only
* Viewport
Shortcuts
=========
Isolate Collection
------------------
* Ctr + click isolates the collection.
It turns all its parents and children "visible", and all the other
collections "invisible".
If ALL the collections were already properly set, we re-set the
collections to their default value.
Set Collection Inside Collections and Objects
---------------------------------------------
* Shift + click: Set/unset inside collections and objects.
We only set objects values as well when we are in View Layer mode and
(obviously) when the objects have a matching property.
Icons
=====
Little reminder that we will need better icons for holdout, indirect only, and
probably instanced (nothing wrong with the current, but it differs from
the proposal when it is turned off).
Also, we need to decide where do we want the modifier/bones/... icons to
be (in which column) and ideally make sure their icons match the ones we
use for collections/objects.
At the moment those are using the screen icon, which is not being used
by collections.
Reviewers: brecht, billrey
Subscribers: pablovazquez
Differential Revision: https://developer.blender.org/D4823
|
|
* The cache file datablock is now evaluated as part of the dependency graph,
creating/freeing the Alembic file handle matching the current frame.
Modifiers and constraints depend on this evaluation.
* Cache file handles and readers now only exist on COW datablocks, never the
original ones.
* Object data paths are flushed back to the original for the user interface.
* The cache file keeps a list of all readers associated with its handle, and
automatically frees them when the handle is freed. This kind of sharing of
data across datablocks is weak but we have no better mechanism for it.
Fix T62720: Alembic sequences not working and crashing
Differential Revision: https://developer.blender.org/D4774
|
|
|
|
tellp() is not valid to check if the string stream is empty. Just get the
string directly as there is no obvious efficient method to check otherwise.
|
|
Add braces for modules already using braces almost everywhere.
|
|
Similar to what is done e.g. in AbcMeshReader::read_mesh()...
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
|
|
|
|
No functional change, this adds LIB definition and args to cmake files.
Without this it's difficult to migrate away from 'BLENDER_SORTED_LIBS'
since there are many platforms/configurations that could break when
changing linking order.
Manually add and enable WITHOUT_SORTED_LIBS to try building
without sorted libs (currently fails since all variables are empty).
This check will eventually be removed.
See T46725.
|
|
The Alembic importer can now deal with XForm-less objects. Apparently
MeshLab exports point clouds without parent transformation matrix (XForm in
Alembic-speak). We shouldn't warn about this, but handle it properly
instead.
|
|
|
|
The `AbcMetaballWriter` now subclasses `AbcGenericMeshWriter` instead of
wrapping an `AbcMeshWriter`. `AbcGenericMeshWriter` was created for this
purpose (writing non-mesh objects as mesh to Alembic) and performs the work
in a cleaner and, more importantly, not crashing way.
|
|
The metaball 'mesh' is animated whenever any of its components are animated.
However, it's not easily possible to visit all its components (AFAIK it
requires a full scan of all objects in the scene and comparing names), so
due to the blobby nature of the metaballs I now simply assume they'll be
animated.
This fixes an issue where a metaball was considered static when the base
ball was static. For example, MBall static but MBall.001 animated would
be considered 'not animated'.
|
|
|
|
|
|
This lets you only triangulate n-gons when setting the number to 5 or more.
Differential Revision: https://developer.blender.org/D4367
|
|
Mostly functions wrapping args, not confirming to our style guide.
|
|
Convention was not to but after discussion on 918941483f7e we agree its
best to change the convention.
Names now mostly follow RNA.
Some exceptions:
- Use 'nodetrees' instead of 'nodegroups'
since the struct is called NodeTree.
- Use 'gpencils' instead of 'grease_pencil'
since 'gpencil' is a common abbreviation in the C code.
Other exceptions:
- Leave 'wm' as it's a list of one.
- Leave 'ipo' as is for versioning.
|
|
We already have different storages for cddata of verts, edges etc.,
'simply' do the same for the mask flags we use all around Blender code
to request some data, or limit some operation to some layers, etc.
Reason we need this is that some cddata types (like Normals) are
actually shared between verts/polys/loops, and we don’t want to generate
clnors everytime we request vnors!
As a side note, this also does final fix to T59338, which was the
trigger for this patch (need to request computed loop normals for
another mesh than evaluated one).
Reviewers: brecht, campbellbarton, sergey
Differential Revision: https://developer.blender.org/D4407
|
|
|
|
Also remove doxy comments for licenses and add missing GPL header.
|
|
Rename for Camera, View3D (also CameraParams & Render not DNA)
|
|
Following removal from C source code.
See: 8c68ed6df16d8893
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Done using:
source/tools/utils_maintenance/c_sort_blocks.py
|
|
|
|
|