Age | Commit message (Collapse) | Author |
|
|
|
|
|
Fixes error in determining 3DView Overlay Line Height. Do not base on current default font height.
Differential Revision: https://developer.blender.org/D9288
Reviewed by Campbell Barton
|
|
Default text output routines (which do not specify a size) will now use Text Style point size.
Differential Revision: https://developer.blender.org/D9107
Reviewed by Brecht Van Lommel
|
|
This is done at drawtime automatically.
|
|
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
|
|
Adds the ability to print text in bold or italics style, synthesized from a single base UI font.
Differential Revision: https://developer.blender.org/D7893
Reviewed by Brecht Van Lommel
|
|
These were stored as float but were originally cast from an int
and were often cast back to int.
Also use int pairs for dimensions values.
|
|
- glyph_bounds: to get the character width.
- glyph_bearing: lower left character starting point.
These values are needed for more precise glyph calculations.
|
|
|
|
There is no need to have another font embedded in the Blender executable, we
can assume the bundled font exists. In the future we may provide a fallback
if the font specified by the user in the preferences is missing a character,
but that can use our bundled international font.
Differential Revision: https://developer.blender.org/D6854
|
|
|
|
This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
|
|
We cannot reliably use translations API from non-main threads.
Now storing translated strings in a static cache, with basic mechanism
to update it on language change.
Reviewers: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D5350
|
|
Avoid BLF having to be concerned with decoding the string
(which can fail).
Also remove redundant extra zero byte from strings.
|
|
On Windows "Cmd" is also replaced with "Win".
Differential Revision: https://developer.blender.org/D4689
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Done using:
source/tools/utils_maintenance/c_sort_blocks.py
|
|
Allows users to select a font for text strips in the video sequence editor.
Related: 3610f1fc43d0 Sequencer: refactor clipboard copy to no longer increase user count.
Reviewed by: Brecht
Differential Revision: https://developer.blender.org/D3621
|
|
|
|
This changes the text hinting setting to be an enum with options
Auto / None / Slight / Full. The default is Auto which currently disables
hinting.
The hinting was tested with a new FreeType version, but this is not what
is used on the buildbots an official release environment, and the fonts
look quite bad because of that. Once FreeType has been upgraded we can
change the default.
Even then the results are not ideal, perhaps due to missing subpixel
positioning and linear color blending support in BLF.
|
|
|
|
|
|
Now disabling anti-aliasing doesn't impact sequencer, render stamp etc.
|
|
|
|
Strip unindented comment blocks - mainly headers to avoid conflicts.
|
|
Flush the text cache so that we have proper scissor test and ordering.
|
|
- batching -> batch_draw.
- ct & size -> len.
- start/end -> begin/end (follow GL convention).
|
|
You can now use BLF_batching_start and BLF_batching_end to batch every
drawcall to BLF together minimizing the overhead introduced by BLF and the
opengl driver.
These calls cannot be nested (for now).
If the modelview matrix changes, previously batched calls are issued and a
the process resume with the new matrix.
However the projection matrix MUST not change and gl scissors as well.
|
|
This is not a perfect win just yet. It's now calling glBufferSubData for
every call (instead of using glMapBufferRange which is almost faster), but
with this system we will be able to batch drawcalls together.
See next commit.
|
|
|
|
BLF is a low level module, which might (and is) used without Blender.
Thanks Campbell for review!
|
|
|
|
Fix some cases that still assumed there to be a global DPI, instead of a per
window DPI that needs to be set before reading U.dpi.
|
|
|
|
We had two versions of several BLF functions -- one for a specific font ID & another for the default font.
New BLF_default function lets us simplify this API & delete the redundant code.
|
|
So we don't need two versions of all other BLF functions -- one for specific font ID & another for the default font.
|
|
blenderplayer uses BLF but not Editor UI, so we got a link error for the missing UI_GetThemeColor function.
Moved the new function from BLF to UI.
@Blendify reported problem in IRC
|
|
For anything fancier than regular Theme colors (shading, alpha, etc.) do this:
unsigned char color[4]
UI_GetThemeColor[Fancy]4ubv(... color)
BLF_color4ubv(fontid, color)
That way the BLF color API stays simple.
|
|
Needed a way to pass main font color to BLF without using obsolete glColor. Could not use immUniform since BLF binds its shader internally.
|
|
While trying to simplify text drawing, noticed no Blender code uses the blur feature. Hopefully scripts don't use it!
|
|
|
|
Following up on recent double --> float commits in the game engine.
|
|
- Adds support for word wrapping to Blender's BLF font library.
- Splits lines when width limit is reached or on explicit \n newlines.
Details:
- Word wrapping is used when `BLF_WORD_WRAP` flag is enabled.
- There is a single loop to handle line wrapping,
this runs callback, passing in a substring,
this way we can avoid code-duplication for all word-wrapped
versions of functions... OR... avoid having to add support
for word-wrapping directly into each function.
- The `ResultBLF` struct was added to be able to get the number
of wrapped lines, when calling otherwise unrelated functions
such as `BLF_draw/BLF_width/BLF_boundbox`,
which can be passed as the last argument to `BLF_*_ex()` functions.
- The `ResultBLF` struct is used to store the result of drawing
(currently only the number of lines wrapped, and the width).
|
|
- Add blentranslation `BLT_*` module.
- moved & split `BLF_translation.h` into (`BLT_translation.h`, `BLT_lang.h`).
- moved `BLF_*_unifont` functions from `blf_translation.c` to new source file `blf_font_i18n.c`.
|
|
D1002 by @plasmasolutions, with own refactoring.
Note, needed to do a bad-level call here (IMB -> BLF)
Also can't use the BLF API directly because its not thread-safe.
So keep the function isolated (blf_thumbs.c).
|