| Age | Commit message (Collapse) | Author |
|---|
|
Was causing some invalid operations in OpenGL.
After more testing should be fine for 2.78.
|
|
Getting a new edit-derived-bmesh was always creating a deform-vert array, even when it wasn't needed.
Since this was called on redraw, in many cases it was doing it unnecessarily.
Now pass in a custom-data mask and only fill in deform-verts when needed.
Gives noticeable drawing speedup (~10-30% here).
|
|
A bit tricky, need to pass additional information about what the attribute
is and how to deal with it.
BI path stays unchanged, just to make things simplier for now.
Fixes T48555: Cycles GLSL- Incorrect Vertex Color results from Attribute node
|
|
Used ** arguments unnecessarily,
also replace BLI_linklist_apply with while loop.
|
|
Normal Map node support for GLSL mode and the internal render (multiple tangents support).
The Normal Map node is a useful node which is present in the Cycles render.
It makes it possible to use normal mapping without additional material node in a node tree.
This patch implements Normal Map node for GLSL mode and the internal render.
Previously only the active UV layer was used to calculate tangents.
|
|
Was called both, however this isn't mainly for uv's so just call 'flag'.
Also remove redundant NULL check.
|
|
Differential Revision: https://developer.blender.org/D1645
|
|
|
|
The generic tangent calculation relied on CDDM arrays which aren't available in edit-mode.
Add a tangent calculation callback, which has its own implementation for editmesh data.
|
|
|
|
Note that the collision modifier doesn't have any use for Loop indices,
so to avoid duplicating the loop array too,
MVertTri has been added which simply stores vertex indices (runtime only).
|
|
Notes:
* Code in rendering and in game engine will still convert
tangents to a tessface representation. Added code that
takes care of tangent layer only, might be removed
when BGE and rendering goes full mlooptri mode.
* Baking should work discovered some dead code while
I was working on the patch, also tangents are broken
when baking from multires (also in master), but those
are separate issues that can be fixed later.
This should fix T45491 as well
|
|
Looks like derivedmesh draw code always assumed a mesh is available.
Make sure that if we use a bmesh, a flag is used to control that.
|
|
|
|
|
|
Code was actually skipping setting color selection indices and previous
commit actually broke mask selection in texture painting.
All should work now.
|
|
|
|
This stores loop indices into the loop array giving easier acess
to data such as vertex-colors and UV's,
removing the need to store an MFace duplicate of custom-data.
This doesn't yet move all internal code from MFace to LoopTri just yet.
Only applies to:
- opengl drawing
- sculpting (pbvh)
- vertex/weight paint
Thanks to @psy-fi for review, fixes and improvements to drawing!
|
|
Get rid of legacy drawing, it's only used for selection,
in which case we can prepare a temporary color buffer and draw
at once. Code is not complete here because we still redundantly
set the draw color in the draw function and don't ommit hidden
faces automatically. Still it works 100% without immediate mode
now.
|
|
- use void instead of float for array arg (cast in the switch statement)
- remove unused args
- use const for poly-mapping and user_data args
|
|
This patch changes the way we draw meshes by introducing
indexed drawing. This makes it possible to easily
upload and rearrange faces ad lib according to any criteria.
Currently we use material sorting but textured sorting and
hiding will be added to optimize textured drawing and skip
per face testing.
It also adds support for vertex buffers for subsurf
modifiers (Except from GLSL drawing), making drawing of
subsurf much faster without need for bogus modifiers.
Tests show that we gain approximately 20-25% performance
by that for solid mode drawing with up to 50% gains for
material drawing. Textured drawing should also have a
small performance gain, but more substantial optimizations
are possible there.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D1406
|
|
Part of moving away from MFace.
|
|
- place return args last position
- move crazyspace function out of DerivedMesh header
- use bool for args
- flow control on own lines to ease debugging
|
|
multires.
Code had special guards for such edges to stop this from happening. I
don't see why this is needed though since code above assigns smoothed
positions for all vertices in the grid.
After removing the guards I saw that this in fact was the only place
where grd adjacency was used, so I completely removed it.
|
|
|
|
The idea is pretty simple: instead of making temporary copy of all the
related custom data layers just pass the ownership from the DM to the
mesh.
This is really handy in cases when you've got DM which you need to
convert to Mesh datablock and wouldn't need that DM after conversion
anyway.
Foe example, render database conversion, exporters and even Modifier
Apply will benefit from this option.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D1127
|
|
This is the core code for it, tools (datatransfer and modifier) will come in next commits).
RNA api is already there, though.
See the code for details, but basically, we define, for each 'smooth fan'
(which is a set of adjacent loops around a same vertex that are smooth, i.e. have a single same normal),
a 'loop normal space' (or lnor space), using auto-computed normal and relevant edges, and store
custom normal as two angular factors inside that space. This allows to have custom normals
'following' deformations of the geometry, and to only save two shorts per loop in new clnor CDLayer.
Normal manipulation (editing, mixing, interpolating, etc.) shall always happen with plain 3D vectors normals,
and be converted back into storage format at the end.
Clnor computation has also been threaded (at least for Mesh case, not for BMesh), since the process can
be rather heavy with high poly meshes.
Also, bumping subversion, and fix mess in 2.70 versioning code.
|
|
Code in ccgdm_draw_attrib_vertex() was entirely the same as the top
portion of the code in cddm_draw_attrib_vertex(). Moved this code to a
new function, DM_draw_attrib_vertex().
ccgdm_draw_attrib_vertex() was removed in favor of calling
DM_draw_attrib_vertex(). cddm_draw_attrib_vertex() still does a couple
extra things, so it still exists but calls DM_draw_attrib_vertex().
In the interest of easy code review, no changes made to the code in
DM_draw_attrib_vertex() other than the new name and an added comment.
Reviewers: campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D1010
|
|
Issue was, when requesting (building) lnors for a mesh that has
autosmooth disabled, one would expect to simply get vnors as lnors.
Until now, it wasn't the case, which was bad e.g. for normal projections
of loops in recent remap code (projecting along split loop normals
when you would expect projection along vertex normals...).
Also, removed the 'angle' parameter from RNA's `mesh.calc_normals_split`.
This should *always* use mesh settings (both autosmooth and smoothresh),
otherwise once again we'd get inconsistencies in some cases.
Will update fbx and obj addons too.
|
|
subsurf needs the same modifications in its derived mesh function or
materials don't get updated at all anymore.
|
|
Basically, our drawing code assumed we always use the edit mesh
materials, which can be different from the derived mesh
materials in modifiers doing overrides. We usually we want to use the
derived mesh when it is available instead.
There are two fixes here for both solid and textured mode. Unfortunately
the fixes do not help to make the display code less labyrinthian but I
expect this "should work" (tm and famous last words)
Solid mode fix is 95% from Bastien, thanks!
|
|
The problem was it used copied verts on the opposite side.
|
|
Note this func needs some love, but this will be for later (should never have been in shrinkwrap code!).
|
|
Yep, at last it's here!
There are a few minor issues remaining but development can go on in
master after discussion at blender institute.
For full list of features see:
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.72/Painting
Thanks to Sergey and Campbell for the extensive review and to the
countless artists that have given their input and reported issues during
development.
|
|
The issue was caused by the temporary CD layers being allocated for subsurf
meshes, same as we've got back in 881fb43.
In the long run this temporary storage is to be re-considered, but it'll also
imply re-considering of the Derivedmesh interaction as well. For now let's
use a simpler solution which is forbidding modifiers to call getArray for other
objects' derivedMeshes but use an API calls which would allocate local copy of
the data preventing race condition of shared data in DM.
|
|
too when in "vertex per face" display
So, turned out after all we need a foreachmapped helper for loops as well... :/
CDDM and EBDM were reasonably simple, but I fought hours with CCGDM (subsurf) to find only a
bad working solution (see D478). So I fallback to a code similar to CDDM one.
Probably not nice for performances, but loops and subsurf are not matching well...
Reviewers: campbellbarton
CC: brecht
Differential Revision: https://developer.blender.org/D478
|
|
|
|
here):
* Add a new calcLoopNormals function to DerivedMesh struct, and implement it for CDDM and CCGDM (subsurf).
EditDerivedBMesh (edit mode DM) only gets a dummy one in this commit.
* Add a tessellated version of CD_LOOPNORMAL layer (CD_TESSLOOPNORMAL), with relevant code to handle it
(tessellation, rna access, etc.).
* Change auto_smooth options of Mesh (angle now in radian internaly, and toggle is now used to enable/disable
split normals in DM creation process). Note BI render code is not touched here, hence its behavior regarding
this option is now incoherent, will be addressed in a separate commit.
Reviewers: campbellbarton
CC: brecht
Differential Revision: https://developer.blender.org/D365
|
|
The variables are considered invalid unless DM_update_materials is
called prior to use. Only use case currently is
mesh drawing. This helps with excessive allocation on the stack during
GPUObject creation, but may help elsewhere in the future as well.
|
|
|
|
|
|
|
|
|
|
rename DM_OMP_LIMIT to BKE_MESH_OMP_LIMIT and set to 0 when in debug mode, same for BM_OMP_LIMIT.
|
|
checks that every modifier gives a valid mesh (very slow) - so off by default even in debug mode.
|
|
Instead of having ifdef __GNUC__ all over the headers
to use special compiler's hints use a special file where
all things like this are concentrated.
Makes code easier to follow and allows to manage special
attributes in more efficient way.
Thanks Campbell for review!
|
|
foreachMappedVert/foreachMappedFaceCenter when needed,
this means in editmode with wire draw, face and vertex normals don't have to be calculated at all.
in most cases the normals are not used so add a flag that makes calculating them only for functions that need them.
also fix face normal calculation for CDDM, was using quad calculation for ngons too.
|
|
|
|
display editmesh stats with deform modifiers.
|
|
old limitation where you could only paint onto one side of a mirrored mesh (weight paint, vertex paint).
|
