Age | Commit message (Collapse) | Author |
|
|
|
This reverts commit 32a9aac3b84f4742937dd8fd2afc14a443cb0248.
|
|
|
|
* BLENDER_VERSION_CYCLE set to beta
* Update pipeline_config.yaml to point to 3.2 branches and svn tags
* Update and uncomment BLENDER_VERSION in download.cmake
|
|
|
|
|
|
Add a version of #BKE_main_namemap_validate that also fixes the issues,
and call it in a do_version to fix recent .blend files saved after the
regression introduced in rB7f8d05131a77.
This is mandatory to fix some production files here at the studio, among
other things.
|
|
Patch implements better way to control playback speed than it is
possible to do with speed effect. Speed factor property can be set in
Time panel.
There are 2 layers of control:
Option to retime movie to match scene FPS rate.
Custom speed factor to control playback rate.
Since playback rate is strip property, it is now possible to manipulate
strip as normal one even if it is retimed.
To facilitate manipulation, some functions need to consider speed factor
and apply necessary corrections to strip offset or strip start. These
corrections may need to be float numbers, so start and offsets must be
float as well.
Sound strips now use speed factor instead of pitch. This means, that
strips will change length to match usable length. In addition, it is
possible to group movie and sound strip and change speed of meta strip.
|
|
Adds an overlay option to show/hide the spline points & lines of masks in the Mask Editor.
It also moves the "smooth" option up (its position left of the selection dropdown was missleading).
{F11847272}
This emerged from a discussion in https://developer.blender.org/D12776
Differential Revision: https://developer.blender.org/D13314
|
|
This adds a new parameter to the "Combined" overlay mode of the mask editor.
The "blending factor" allows users to blend the mask exterior with the original
footage to visualise the content of the mask in a more intuitive way. The
"Alpha" overlay is unaffected by this change.
The existing "Combined" overlay is used like before (covering everything
outside the mask in black), but can be blended with the slider in the mask
overlay to look at the exterior.
This is part of an effort to make mask editing more intuitive & easy to use:
https://developer.blender.org/T93097
Differential Revision: https://developer.blender.org/D13284
|
|
This commit ports the "Set Spline Type" node to the new curves type.
Performance should be improved in similar ways to the other refactors
from the conversion task (T95443). Converting to and from Catmull Rom
curves is now supported. There are a few cases where a lot of work can
be skipped: when the number of points doesn't change, and when the
types already match the goal type.
The refactor has a few other explicit goals as well:
- Don't count on initialization of attribute arrays when they are
first allocated.
- Avoid copying the entire data-block when possible.
- Make decisions about which attributes to copy when changing curves
more obvious.
- Use higher-level methods to copy data between curve points.
- Optimize for the common cases of single types and full selections.
- Process selected curves of the same types in the same loop.
The Bezier to NURBS conversion is written by Piotr Makal (@pmakal).
Differential Revision: https://developer.blender.org/D14769
|
|
This reverts commit da46ed9116cd3a82f440cfec180728f0b3871d9c.
|
|
|
|
* BLENDER_VERSION_CYCLE set to beta
* Update pipeline_config.yaml to point to 3.2 branches and svn tags
* Update and uncomment BLENDER_VERSION in download.cmake
|
|
Bump the version number for the new release cycle.
|
|
When height is limited, it is defined by space occupied by strips,
but at least channels 1 to 7 will be always visible. This allows it to
easily overview timeline content by zooming out to maximum extent in Y
axis and panning in X axis.
More channels can be "created" on demand by moving strip to higher
channel. When strip is removed and highest channel becomes empty, view
will stay as is until it is moved down. Then new highest point is
remembered and it is not possible to pan upwards until strip is moved to
higher channel.
Limiting takes into account height of scrubbing and markers area as
well as scrollers. This means that when zoomed out to maximum extent,
no strips are obstructed by fixed UI element.
Fixes T57976
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14263
|
|
|
|
This change moves the grid panel UI from the View tab up into the
Overlay panel.
Reasons to move to the Overlay panel include:
- Consistency with the grid options in the 3D viewport
- The grid has been drawn as an Overlay for quite some time already
Additional changes that now make sense to have:
- The grid responds to the main Overlay show/hide toggle
- Adds a toggle to show/hide the grid which is consistent with overlays in general
As before, these grid controls are only available for active UV edit
sessions.
Differential Revision: https://developer.blender.org/D11862
|
|
Those geometry types are expected to behave the same as e.g. mesh
with respect to data copying. The fact that this was not enabled
already was an oversight in the initial commit that added these types.
Differential Revision: https://developer.blender.org/D14554
|
|
Make sure the filtering in the Asset Browser doesn't filter out
collection assets.
|
|
Differential Revision: https://developer.blender.org/D14546
|
|
This patch adds channel region to VSE timeline area for drawing channel
headers. It is synchronizedwith timeline region. 3 basic features are
implemented - channel visibility, locking and name.
Channel data is stored in `SeqTimelineChannel` which can be top-level
owned by `Editing`, or it is owned by meta strip to support nesting.
Strip properties are completely independent and channel properties are
applied on top of particular strip property, thus overriding it.
Implementation is separate from channel regions in other editors. This
is mainly because style and topology is quite different in VSE. But
also code seems to be much more readable this way.
Currently channels use functions similar to VSE timeline to draw
background to provide illusion of transparency, but only for background
and sfra/efra regions.
Great portion of this patch is change from using strip visibility and
lock status to include channel state - this is facilitated by functions
`SEQ_transform_is_locked` and `SEQ_render_is_muted`
Originally this included changes in D14263, but patch was split for
easier review.
Reviewed By: fsiddi, Severin
Differential Revision: https://developer.blender.org/D13836
|
|
This commit makes the dot grid used as background in the node editor
more visually stable when zooming in and out.
The dot grid now uses a continuously subdividing pattern, where
each level of subdivision divides the previous five times, similar to
the line grid in the 3D viewport.
The maximum for the "Grid Levels" theme setting is changed to 3, since
any further subdivisions are too small to be visible.
The "Grid Levels" value for the default themes "Blender Dark" and
"Blender Light" is therefore changed to 3, as well.
Reviewed By: Hans Goudey, Pablo Vazquez
Differential Revision: http://developer.blender.org/D13302
|
|
creation/duplication/resync code, and some basic do_version.
When creating with hierarchies, core code only generates system
overrides, responsibility to define 'user overrides' is then for the
higher-level calling code (Editor/Operator-level).
do_version code uses fairly basic euristics, should be good enough here
though in most cases. and can always be refined later if needed.
Ref: {T95707}.
|
|
This patch enables all 8 combinations of Nurbs modes: Cyclic,
Bezier and Endpoint. Also removes restriction on Bezier Nurbs order.
The most significant changes are mode combinations bringing new
meaning. In D13891 is a scheme showing NURBS with same control
points in a modes, and also further description of each possible case.
Differential Revision: https://developer.blender.org/D13891
|
|
Supporting two kinds of dragging is redundant, remove tweak events as
they only supported 3 mouse buttons and added complexity from using the
'value' to store directions.
Support only click-drag events (KM_CLICK_DRAG) which can be used with
any keyboard or mouse button.
Details:
- A "direction" member has been added to keymap items and events which
can be used when the event value is set to KM_CLICK_DRAG.
- Keymap items are version patched.
- Loading older key-maps are also updated.
- Currently the key-maps stored in ./release/scripts/presets/keyconfig/
still reference tweak events & need updating. For now they are updated
on load.
Note that in general this wont impact add-ons as modal operators don't
receive tweak events.
Reviewed By: brecht
Ref D14214
|
|
User request since adding this option in:
51975b89edfcc02131f1f8248e1b3442ea2778fa
When disabled, use the previous behavior when orbiting a camera view.
|
|
The flags overlapped ever since normalize was added, so this
requires versioning to copy the flag value. This needs to be
done both in Blender 3.1 and 3.2.
Differential Revision: https://developer.blender.org/D14165
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
This change will make handling of liboverrides hierarchies (especially
resyncing) much easier and efficient. It should also make it more
resilient to 'degenerate' cases, and allow proper support of things like
parenting an override to another override of the same linked data (e.g.
a override character parented to another override of the same
character).
NOTE: this commit only implements minimal changes to add that data and
generate it for existing files on load. Actual refactor of resync code
to take advantage of this new info will happen separately.
|
|
Previously, nearest interpolation filter was used for preview, because
it offered good performance and bilinear was used for rendering. This
is not always desirable behavior, so filter method can now be chosen by
user. Chosen method will be used for preview and for rendering.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12807
|
|
Now all proxies will always be converted to library overrides. If
conversion fails, they are simply 'disabled'.
This should be the last 'user-visible' step of proxies removal.
Remaining upcoming commits will remove internal ID management, depsgraph
and evaluation code related to proxies.
Also bump the blendfile subversion.
Part of T91671.
|
|
This reverts commit d45098024ea5b533a406c2a2352b35e49a5e72af.
|
|
|
|
|
|
|
|
Bump the version number for the new release cycle.
|
|
This patch refactors the instance-realization code and adds new functionality.
* Named and anonymous attributes are propagated from instances to the
realized geometry. If the same attribute exists on the geometry and on an
instance, the attribute on the geometry has precedence.
* The id attribute has special handling to avoid creating the same id on many
output points. This is necessary to make e.g. the Random Value node work
as expected afterwards.
Realizing instance attributes has an effect on existing files, especially due to the
id attribute. To avoid breaking existing files, the Realize Instances node now has
a legacy option that is enabled for all already existing Realize Instances nodes.
Removing this legacy behavior does affect some existing files (although not many).
We can decide whether it's worth to remove the old behavior as a separate step.
This refactor also improves performance when realizing instances. That is mainly
due to multi-threading. See D13446 to get the file used for benchmarking. The
curve code is not as optimized as it could be yet. That's mainly because the storage
for these attributes might change soonish and it wasn't worth optimizing for the
current storage format right now.
```
1,000,000 x mesh vertex: 530 ms -> 130 ms
1,000,000 x simple cube: 1290 ms -> 190 ms
1,000,000 x point: 1000 ms -> 150 ms
1,000,000 x curve spiral: 1740 ms -> 330 ms
1,000,000 x curve line: 1110 ms -> 210 ms
10,000 x subdivided cylinder: 170 ms -> 40 ms
10 x subdivided spiral: 180 ms -> 180 ms
```
Differential Revision: https://developer.blender.org/D13446
|
|
Since we have the overlays popover, it makes sense to allow toggling the
context path like in the 3D viewport. This commit adds a property,
and turns it on by default in existing files.
Differential Revision: https://developer.blender.org/D13248
|
|
Conflicts:
source/blender/blenkernel/BKE_blender_version.h
source/blender/blenloader/intern/versioning_300.c
|
|
Original implementation was a quick prototype which should have never
landed as-is in master. It had very limiting constraints and did not
allow for any real further development.
This commit fixes the internal implementation to make more sensible,
maintainable and evolutive.
NOTE: This commit introduces another forward-incompatibility in the
Blender file format: Files saved after this commit won't open properly
in older versions of blender regarding local inserted constraints or
modifiers into overrides of linked data.
NOTE: Technical details: The 'anchor' item name/index is now stored in
`subitem_reference_` members, and the actual 'source' item name/index is
stored in `subitem_local_` members of the override property operation
data.
Previously, only the `subitem_local_` members were used, storing the
anchor item name/index, and assuming the 'source' item was always the
next in the list.
Milestone I of T82160.
Maniphest Tasks: T82160
Differential Revision: https://developer.blender.org/D13282
|
|
This seems to be oversight in 271231f58ee3 where strip color was
defined only for light theme.
|
|
Followup to e65230f0c03c.
Pablo and I decided it's fine to reset themes again when saved with the
recent 3.1 builds.
This needed to be done a bit careful, since a normal version patch
resetting the theme would've reset the theme for anybody opening
preferences of a 3.0 build (even the final release build) in a 3.1
build. So make sure the theme is at least from a 3.1 build (but not
newer then this commit of course).
|
|
* Animation channels (Fixes T92612)
* Curve widget (Fixes T92595)
* Pie menu (Fixes T92590)
* Radio and toggle buttons background
* Checkbox background
* Fix highlighted marker name on Dopesheet (text highlight on Dopesheet)
#### Master
{F11697667, size=full}
#### This Patch
{F11697669, size=full}
{F11697849, size=full}
{F11697833, size=full}
{F11697852, size=full}
Reviewed By: #user_interface, campbellbarton, Severin
Maniphest Tasks: T92595, T92612, T92590
Differential Revision: https://developer.blender.org/D13087
# Conflicts:
# source/blender/blenkernel/BKE_blender_version.h
|
|
This reverts commit f7a3450e63d129b680aa5fd8330d54c17efdf495.
|
|
|
|
|
|
Bump the version number for the new release cycle.
|
|
This reverts commit 7b9e3534cfd1dd4bf3aefb98407f2e42a6efac4a.
This was supposed to go to master, not the 3.0 branch.
|
|
Bump the version number for the new release cycle.
|