Age | Commit message (Collapse) | Author |
|
Noisy change, but safe, and better do it sooner than later if we are to
rework copying code. Also, previous commit shows this *is* useful to
catch some mistakes.
|
|
This patch supports auto-clamped handles for curves,
useful since without this it can be difficult to have 'flat' sections of a curve.
|
|
Shutter curve now can be controlled using curve mapping widget in the motion
blur panel in Render buttons. Only mapping from 0..1 by x axis are allowed,
Y values will be normalized to fill in 0..1 space as well automatically.
Y values of 0 means fully closed shutter, Y values of 1 means fully opened
shutter.
Default mapping is set to old behavior when shutter opens and closes instantly.
This shutter mapping curve could easily be used by any other render engine by
accessing scene.render.motion_blur_shutter_curve.
Reviewers: #cycles, brecht, juicyfruit, campbellbarton
Differential Revision: https://developer.blender.org/D1585
|
|
Previously curve mapping was always setting to only a single slope which then
was symmetrizied by a tools (such as brush or compositing).
With this change it's possible to set curve to symmetrical slopes as a part
of preset.
|
|
We're currently only supporting save to a default format color space, which
makes it a bit tricky to prevent ImBuf from being changed.
For until when saving to a custom colorspace works we'll just reload image
if the space changes.
|
|
|
|
|
|
Throw a python error if user attempts to use CurveMap without calling
CurveMapping.initialize() first. Added access to the initialize function
to CurveMapping on RNA level.
Thanks to Campbel for the help and remarks!
|
|
Curves may not be not initialized when called from python. C code
explicilty says that curvemapping_initialize should be called prior to
evaluating the curve, however the curve clip rectangle is not available
when calling evaluation on the curvemap. This is not possible unless we
force the evaluation on CurveMapping level, not on CurveMap level.
For now just pass a rectangle with the x boundary values of the curvemap
for evaluation to avoid the crash.
|
|
|
|
authors to avoid bugs with accessing removed data.
|
|
conversion
|
|
|
|
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
|
|
make RegisterBlendExtension_Fail a static func
u
|
|
safety), now initializations has to be done outside evaluation.
|
|
curvemapping_changed()
|
|
calculation (when there were black or white inputs on the curve node).
avoid allocation by using local vars for black/white storage & curve calculation.
|
|
This implements basic color grading modifiers in sequencer, supporting
color balance, RGB curves and HUE corrections.
Implementation is close to object modifiers, some details are there:
http://wiki.blender.org/index.php/User:Nazg-gul/SequencerModifiers
Modifiers supports multi-threaded calculation, masks and instant
parameter changes.
Also added cache for pre-processed image buffers for current frame,
so changing sequence properties does not require rendering of original
sequence (like rendering scene, loading file from disk and so)
|
|
|
|
evaluate the curve and update after changes.
|
|
|
|
without the underscores these clogged up the namespace for autocompleation which was annoying.
|
|
byte => float, float => float, byte => byte conversions with profile, dither
and predivide. Previously code for this was spread out too much.
There should be no functional changes, this is so the predivide/table/dither
patches can work correctly.
|
|
http://markmail.org/message/fp7ozcywxum3ar7n
|
|
|
|
- use 'const float *' and array size in some function declarations.
- replace macros for BLI_math functions INPF, VECCOPY, VECADD etc.
- remove unused VertRen.clip struct member.
- remove static squared_dist() from 2 files, replace with BLI_math function len_squared_v3v3().
- use vertex arrays for drawing clipping background in the 3D viewport.
|
|
|
|
|
|
curves etc).
Fixed by adding a 'slope' parameter to curvemap_reset() to mirror curve presets around Y axis.
Also removed curve preset with 'random' icon, wasn't doing what it looked like it should,
this was intended only for hue correct node anyway.
|
|
|
|
by Xavier Thomas
This adds the waveform monitor and vectorscope to the image editor 'scopes'
region, bringing it inline (plus a bit more) with sequence editor functionality,
and a big step closer to the end goal of unifying the display code for image/
comp/sequence editor. It's non-intrusive, using the same code paths as
the histogram.
There's still room for more tweaks - I modified the original patch, changing
the openGL immediate mode drawing of the waveform display to vertex arrays for
speed optimisation. Xavier can look at doing this for the vectorscope now too.
Thanks very much Xavier!
|
|
instead of flat/straight
|
|
|
|
|
|
* Added a generic 'histogram' ui control, currently available in new image editor
'scopes' region (shortcut P). Shows the histogram of the currently viewed image.
It's a baby step in unifying the functionality and code from the sequence editor,
so eventually we can migrate the sequence preview to the image editor too,
like compositor.
Still a couple of rough edges to tweak, regarding when it updates. Also would
be very nice to have this region as a partially transparent overlapping region...
|
|
also moved brush curve presets code into curvemapping code.
|
|
After testing and feedback, I've decided to slightly modify the way color
management works internally. While the previous method worked well for
rendering, was a smaller transition and had some advantages over this
new method, it was a bit more ambiguous, and was making things difficult
for other areas such as compositing.
This implementation now considers all color data (with only a couple of
exceptions such as brush colors) to be stored in linear RGB color space,
rather than sRGB as previously. This brings it in line with Nuke, which also
operates this way, quite successfully. Color swatches, pickers, color ramp
display are now gamma corrected to display gamma so you can see what
you're doing, but the numbers themselves are considered linear. This
makes understanding blending modes more clear (a 0.5 value on overlay
will not change the result now) as well as making color swatches act more
predictably in the compositor, however bringing over color values from
applications like photoshop or gimp, that operate in a gamma space,
will give identical results.
This commit will convert over existing files saved by earlier 2.5 versions to
work generally the same, though there may be some slight differences with
things like textures. Now that we're set on changing other areas of shading,
this won't be too disruptive overall.
I've made a diagram explaining the pipeline here:
http://mke3.net/blender/devel/2.5/25_linear_workflow_pipeline.png
and some docs here:
http://www.blender.org/development/release-logs/blender-250/color-management/
|
|
- 1st stage: Linear Workflow
This implements automatic linear workflow in Blender's renderer. With the
new Colour Management option on in the Render buttons, all inputs to the
renderer and compositor are converted to linear colour space before
rendering, and gamma corrected afterwards. In essence, this makes all
manual gamma correction with nodes, etc unnecessary, since it's done
automatically through the pipeline.
It's all explained much better in the notes/doc here, so please have a look:
http://wiki.blender.org/index.php/Dev:Source/Blender/Architecture/Colour_Management
And an example of the sort of difference it makes:
http://mke3.net/blender/devel/rendering/b25_colormanagement_test01.jpg
This also enables Colour Management in the default B.blend, and changes the
default lamp falloff to inverse square, which is more correct, and much
easier to use now it's all gamma corrected properly.
Next step is to look into profiles/soft proofing for the compositor.
Thanks to brecht for reviewing and fixing some oversights!
|
|
Enable with WITH_LCMS (options have been added for scons).
lcms is very common on linux package managers, so no need to add in extern (IMHO). Libs for windows can be added to /lib
Code is mostly a proof of concept with hardcoded path for icc profile (taken from the lcms test suite).
Adding this now to svn so it doesn't rot on my hard drive. People interested in pushing it forward should feel free to dig in the code or poke me about it.
|
|
the features that are needed to run the game. Compile tested with
scons, make, but not cmake, that seems to have an issue not related
to these changes. The changes include:
* GLSL support in the viewport and game engine, enable in the game
menu in textured draw mode.
* Synced and merged part of the duplicated blender and gameengine/
gameplayer drawing code.
* Further refactoring of game engine drawing code, especially mesh
storage changed a lot.
* Optimizations in game engine armatures to avoid recomputations.
* A python function to get the framerate estimate in game.
* An option take object color into account in materials.
* An option to restrict shadow casters to a lamp's layers.
* Increase from 10 to 18 texture slots for materials, lamps, word.
An extra texture slot shows up once the last slot is used.
* Memory limit for undo, not enabled by default yet because it
needs the .B.blend to be changed.
* Multiple undo for image painting.
* An offset for dupligroups, so not all objects in a group have to
be at the origin.
|
|
Please read:
http://www.blender3d.org/cms/Imaging.834.0.html
Or in short:
- adding MultiLayer Image support
- recoded entire Image API
- better integration of movie/sequence Images
Was a whole load of work... went down for a week to do this. So, will need
a lot of testing! Will be in irc all evening.
|
|
- a Group has Curve node inside
- this Group was re-used more times
- with threaded render activated
- and both groups executed on same time
Then the premultipy optimize table was created twice... causing memory
to confuse.
|
|
- Image curves are only applied now when curves panel is in use. Closing
the panel will disable curves, reopen Panel enable curves.
You can minimize the Curves panel to keep it active. That latter then
works as visualization curves are being applied.
- Compositor output now also uses Image window curves, if active.
|
|
A full detailed description of this will be done later... is several days
of work. Here's a summary:
Render:
- Full cleanup of render code, removing *all* globals and bad level calls
all over blender. Render module is now not called abusive anymore
- API-fied calls to rendering
- Full recode of internal render pipeline. Is now rendering tiles by
default, prepared for much smarter 'bucket' render later.
- Each thread now can render a full part
- Renders were tested with 4 threads, goes fine, apart from some lookup
tables in softshadow and AO still
- Rendering is prepared to do multiple layers and passes
- No single 32 bits trick in render code anymore, all 100% floats now.
Writing images/movies
- moved writing images to blender kernel (bye bye 'schrijfplaatje'!)
- made a new Movie handle system, also in kernel. This will enable much
easier use of movies in Blender
PreviewRender:
- Using new render API, previewrender (in buttons) now uses regular render
code to generate images.
- new datafile 'preview.blend.c' has the preview scenes in it
- previews get rendered in exact displayed size (1 pixel = 1 pixel)
3D Preview render
- new; press Pkey in 3d window, for a panel that continuously renders
(pkey is for games, i know... but we dont do that in orange now!)
- this render works nearly identical to buttons-preview render, so it stops
rendering on any event (mouse, keyboard, etc)
- on moving/scaling the panel, the render code doesn't recreate all geometry
- same for shifting/panning view
- all other operations (now) regenerate the full render database still.
- this is WIP... but big fun, especially for simple scenes!
Compositor
- Using same node system as now in use for shaders, you can composit images
- works pretty straightforward... needs much more options/tools and integration
with rendering still
- is not threaded yet, nor is so smart to only recalculate changes... will be
done soon!
- the "Render Result" node will get all layers/passes as output sockets
- The "Output" node renders to a builtin image, which you can view in the Image
window. (yes, output nodes to render-result, and to files, is on the list!)
The Bad News
- "Unified Render" is removed. It might come back in some stage, but this
system should be built from scratch. I can't really understand this code...
I expect it is not much needed, especially with advanced layer/passes
control
- Panorama render, Field render, Motion blur, is not coded yet... (I had to
recode every single feature in render, so...!)
- Lens Flare is also not back... needs total revision, might become composit
effect though (using zbuffer for visibility)
- Part render is gone! (well, thats obvious, its default now).
- The render window is only restored with limited functionality... I am going
to check first the option to render to a Image window, so Blender can become
a true single-window application. :)
For example, the 'Spare render buffer' (jkey) doesnt work.
- Render with border, now default creates a smaller image
- No zbuffers are written yet... on the todo!
- Scons files and MSVC will need work to get compiling again
OK... thats what I can quickly recall. Now go compiling!
|
|
- cleanup of color curves code; goes at least twice faster now!
(includes black/white point stuff)
- When using 'Curves' in image window on a byte rect, it creates a (temp)
float rect to operate on. So curves work for regular pictures too now.
|
|
Image as loaded in Blender (from openexr.com):
http://www.blender.org/bf/exrcurve1.jpg
Image with different white point:
http://www.blender.org/bf/exrcurve2.jpg
Image with white and black point and a curve:
http://www.blender.org/bf/exrcurve3.jpg
Use SHIFT+click to set the black point, and CTRL+click for white point.
The buttons in the panel work too, of course.
The curves work after the black/white range was corrected, so you can
stick to curves with a normal 0-1 range.
There's also now a general color curve, marked with 'C' button.
Note; this currently only maps the float colors to a visible 8 bits per
channel rect. You can save it, but when the blender file loads the curve
or mapping is not executed until you click in the curves... have to look
at that still.
Speed for this is also quite unoptimized... still WIP, but fun!
|
|
- New UI element: the "Curve Button".
For mapping ranges (like 0 - 1) to another range, the curve button can be
used for proportional falloff, bone influences, painting density, etc.
Most evident use is of course to map RGB color with curves.
To be able to use it, you have to allocate a CurveMapping struct and pass
this on to the button. The CurveMapping API is in the new C file
blenkernel/intern/colortools.c
It's as simple as calling:
curvemap= curvemapping_add(3, 0, 0, 1, 1)
Which will create 3 curves, and sets a default 0-1 range. The current code
only supports up to 4 curves maximum per mapping struct.
The CurveMap button in Blender than handles allmost all editing.
Evaluating a single channel:
float newvalue= curvemapping_evaluateF(curvemap, 0, oldval);
Where the second argument is the channel index, here 0-1-2 are possible.
Or mapping a vector:
curvemapping_evaluate3F(curvemap, newvec, oldvec);
Optimized versions for byte or short mapping is possible too, not done yet.
In butspace.c I've added a template wrapper for buttons around the curve, to
reveil settings or show tools; check this screenie:
http://www.blender.org/bf/curves.jpg
- Buttons R, G, B: select channel
- icons + and -: zoom in, out
- icon 'wrench': menu with tools, like clear curve, set handle type
- icon 'clipping': menu with clip values, and to dis/enable clipping
- icon 'x': delete selection
In the curve button itself, only LMB clicks are handled (like all UI elements
in Blender).
- click on point: select
- shift+click on point: swap select
- click on point + drag: select point (if not selected) and move it
- click outside point + drag: translate view
- CTRL+click: add new point
- hold SHIFT while dragging to snap to grid
(Yes I know... either one of these can be Blender compliant, not both!)
- if you drag a point exactly on top of another, it merges them
Other fixes:
- Icons now draw using "Safe RasterPos", so they align with pixel boundary.
the old code made ints from the raster pos coordinate, which doesn't work
well for zoom in/out situations
- bug in Node editing: buttons could not get freed, causing in memory error
prints at end of a Blender session. That one was a very simple, but nasty
error causing me all evening last night to find!
(Hint; check diff of editnode.c, where uiDoButtons is called)
Last note: this adds 3 new files in our tree, I did scons, but not MSVC!
|