| Age | Commit message (Collapse) | Author |
|---|
|
Noisy change, but safe, and better do it sooner than later if we are to
rework copying code. Also, previous commit shows this *is* useful to
catch some mistakes.
|
|
Viewport Shading
So... Curve+shapekey was even more broken than it looked, this report was
actually a nice crasher (immediate crash in an ASAN build when trying to
edit a curve shapekey with some viewport rendering enabled).
There were actually two different issues here.
I) The less critical: rB6f1493f68fe was not fully fixing issues from
T50614. More specifically, if you updated obdata from editnurb
*without* freeing editnurb afterwards, you had a 'restored' (to
original curve) editnurb, without the edited shapekey modifications
anymore. This was fixed by tweaking again `calc_shapeKeys()` behavior in
`ED_curve_editnurb_load()`.
II) The crasher: in `ED_curve_editnurb_make()`, the call to
`init_editNurb_keyIndex()` was directly storing pointers of obdata
nurbs. Since those get freed every time `ED_curve_editnurb_load()` is
executed, it easily ended up being pointers to freed memory. This was
fixed by copying those data, which implied more complex handling code
for editnurbs->keyindex, and some reshuffling of a few functions to
avoid duplicating things between editor's editcurve.c and BKE's curve.c
Note that the separation of functions between editors and BKE area for
curve could use a serious update, it's currently messy to say the least.
Then again, that area is due to rework since a long time now... :/
Finally, aligned 'for_render' curve evaluation to mesh one - now
editing a shapekey will show in rendered viewports, if it does have some
weight (exactly as with shapekeys of meshes).
|
|
Turns out most BKE_foo_make_local datablock-specific functions are actually doing
exactly the same thing, only two currently need special additional operations
(object and brush ones). So added a BKE_id_make_local_generic instead
of copying same code over and over.
Also, changed a bit how make_local works in case we are localizing a whole library.
We need to do the 'remap' step (from old linked ID to new local one) in the second loop,
otherwise we miss some dependencies. This fixes main part of T48907.
|
|
used locally.
Will be used by link/append code.
|
|
Also allows us to get rid of a few _copy_ex() versions...
|
|
takes a Main as parameter.
Now using modern features from libquery/libremap areas.
Provides same kind of fixes/improvements as for BKE_object_make_local() (see rBd1a4ae3f395a6).
|
|
|
|
handling).
This commit changes a lot of how IDs are handled internally, especially the unlinking/freeing
processes. So far, this was very fuzy, to summarize cleanly deleting or replacing a datablock
was pretty much impossible, except for a few special cases.
Also, unlinking was handled by each datatype, in a rather messy and prone-to-errors way (quite
a few ID usages were missed or wrongly handled that way).
One of the main goal of id-remap branch was to cleanup this, and fatorize ID links handling
by using library_query utils to allow generic handling of those, which is now the case
(now, generic ID links handling is only "knwon" from readfile.c and library_query.c).
This commit also adds backends to allow live replacement and deletion of datablocks in Blender
(so-called 'remapping' process, where we replace all usages of a given ID pointer by a new one,
or NULL one in case of unlinking).
This will allow nice new features, like ability to easily reload or relocate libraries, real immediate
deletion of datablocks in blender, replacement of one datablock by another, etc.
Some of those are for next commits.
A word of warning: this commit is highly risky, because it affects potentially a lot in Blender core.
Though it was tested rather deeply, being totally impossible to check all possible ID usage cases,
it's likely there are some remaining issues and bugs in new code... Please report them! ;)
Review task: D2027 (https://developer.blender.org/D2027).
Reviewed by campbellbarton, thanks a bunch.
|
|
Idea is, instead of ignoring completely missing linked datablocks, to
create void placeholders for them.
That way, you can work on your file, save it, and find again your missing data once
lib becomes available again. Or you can edit missing lib's path (in Outliner),
save and reload the file, and you are done.
Also, Outliner now shows broken libraries (and placeholders) with a 'broken lib' icon.
Future plans are also to be able to relocate missing libs and reload them at runtime.
Code notes:
- Placeholder ID is just a regular datablock of same type as expected linked one,
with 'default' data, and a LIB_MISSING bitflag set.
- To allow creation of such datablocks, creation of datablocks in BKE was split in two step:
+ Allocation of memory itself.
+ Setting of all internal data to default values.
See also the design task (T43351).
Reviewed by @campbellbarton, thanks a bunch!
Differential Revision: https://developer.blender.org/D1394
|
|
D1391 by @pink.vertex with own fixes/edits
|
|
|
|
This commit only adds callbacks which then later be used with major dependency
graph commit, keeping the upcoming commit more clean to follow.
Should be no functional changes so far still.
|
|
We can calculate tangents analytically for bezier curves, so just make
them awesome. New code uses forward differencing calculation for
efficiency just like curve calculation.
Picture before/after:
http://www.pasteall.org/pic/87843
|
|
|
|
|
|
|
|
Extrude and Ctrl+LMB now support multiple selected vertices.
Also maintain active vertices.
D964 by Tyler Sliwkanich with own modifications
|
|
|
|
Vertex parent was using original non-modified nurbs list, simply because
it didn't have something else to operate with.
Now we've got deformed by pre-tessellation modifiers nurbs in the curve
cache which might be used y the vertex parent.
|
|
- lamp
- camera
- font
- empty & effector
Also fix inconsistency with apply transform
(modified shape-keys for meshes but not curve/lattice)
|
|
curve factor.
Root of the issue goes to the fact that bevel list calculation might drop some points
if they're at the same position. This made spline length calculation goes wrong.
Now the length of the bevel segments is stored in the bevel list, so values are
always reliable.
Initial patch by Lukas Treyer with some tweaks from me.
|
|
curves' splines and texts' letters.
Useful especially for importer addons.
Reviewers: campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D650
|
|
|
|
|
|
|
|
|
|
|
|
D395 from Henrik Aarnio with some improvements.
|
|
Also remove outdated comments.
|
|
|
|
Changed curve active point from pointer to index. Allows curve active point to be saved to file and retained between modes for free. Also some small optimisations by removing pointer look up code.
- Made active point access functions into BKE API calls.
- Fixes operators where curve de-selection resulted in unsel-active point.
- Split curve delete into 2 functions
|
|
|
|
T37799 Patch from Simon Repp
with added option to recalculate handle lengths.
|
|
There were several issues with how bounding box and texture space
are calculated:
- This was done at the same time as applying modifiers, meaning if
several objects are sharing the same curve datablock, bounding
box and texture space will be calculated multiple times.
Further, allocating bounding box wasn't safe for threading.
- Bounding box and texture space were evaluated after pre-tessellation
modifiers are applied. This means Curve-level data is actually
depends on object data, and it's really bad because different
objects could have different modifiers and this leads to
conflicts (curve's data depends on object evaluation order)
and doesn't behave in a predictable way.
This commit moves bounding box and texture space evaluation from
modifier stack to own utility functions, just like it's was done
for meshes.
This makes curve objects update thread-safe, but gives some
limitations as well. Namely, with such approach it's not so
clear how to preserve the same behavior of texture space:
before this change texture space and bounding box would match
beveled curve as accurate as possible.
Old behavior was nice for quick texturing -- in most cases you
didn't need to modify texture space at all. But texture space
was depending on render/preview settings which could easily lead
to situations, when final result would be far different from
preview one.
Now we're using CV points coordinates and their radius to approximate
the bounding box. This doesn't give the same exact texture space,
but it helps a lot keeping texture space in a nice predictable way.
We could make approximation smarter in the future, but fir now
added operator to match texture space to fully tessellated curve
called "Match Texture Space".
Review link:
https://codereview.appspot.com/15410043/
Brief description:
http://wiki.blender.org/index.php/User:Nazg-gul/GSoC-2013/Results#Curve_Texture_Space
|
|
Added surface support to recent curve split operator, completing quick hack todo
Updated nurbs separate operator to make use of new split logic, completing tools todo
Added 'Delete segment' option to surfaces and improved surface duplication, used for split/separate
|
|
selected but not the mid-point.
only one of the handles would be changed to the HD_FREE.
effected curves and fcurves.
|
|
|
|
by Kevin Mackay (yakca)
The operator follows roughly the same behaviour as the split operator for a mesh (Ykey).
|
|
That ended up in tricky code trying to mimic depsgraph
branch behavior API-wise preserving texspace and bound
box calculation compatible with previous releases.
So for now bring cu->disp back to the trunk but keep
texpsace and boundbox APIs the same as in the branch.
This keeps texpsapce and boundbox behavior fully compatible
with previous releases and still makes API the same as
for meshes.
|
|
Object update used to free object-data level bounding box to trigger
it's re-calculation in the future. Such a freeing performed from
object update isn't thread-safe because mesh could be shared between
multiple objects.
Rather than freeing bounding box, tag it's as invalid, this is safe
from threading point of view and also prevents unnecessary memory
re-allocation.
Object-level bounding box is still reallocating, but think we could
change this easily in the future as well.
--
svn merge -r58154:58156 -r59258:59259 ^/branches/soc-2013-depsgraph_mt
|
|
Now modifier stack wouldn't modify original curve's nurbs
and will operate on a copy of nurbs.
This makes it possible to process curve object update with
shared curve datablocks from multiple threads. There's no
big overhead for creating a copy of nurbs comparing to old
behavior which was allocating original vertex array and
apply coordinates on curve after all modifier are applied.
The only remained issue with curves is curve's bounding box
and texture space. It's not thread-safe, but it wouldn't
lead to crashes -- it just could lead to either memory
leak or wrong texture coordinates due to difference in
modifiers stacks of objects which shares the same curve.
--
svn merge -r57959:57961 ^/branches/soc-2013-depsgraph_mt
|
|
So far it was harmless, but with upcoming changes having this
argument could be confusing from logic point of view
--
svn merge -r57958:57959 ^/branches/soc-2013-depsgraph_mt
|
|
I know this is not so much nice to have this guys hanging
around in a general Object datablock and ideally they better
be wrapped around into a structure like DerivedMesh or
something like this. But this is pure runtime only stuff and
we could re-wrap them around later.
Main purpose of this is making curves more thread safe,
so no separate threads will ever start freeing the same path
or the same bevel list.
It also makes sense because path and bevel shall include
deformation coming from modifiers which are applying on
pre-tesselation point and different objects could have
different set of modifiers. This used to be really confusing
in the past and now data which depends on object is stored
in an object, making things clear for understanding even.
This doesn't make curve code fully thread-safe due to
pre-tesselation modifiers still modifies actual nurbs and
lock is still needed in makeDispListsCurveTypes, but this
change makes usage of paths safe for threading.
Once modifiers will stop modifying actual nurbs, curves
will be fully safe for threading.
Actually, this commit also contains wrapping runtime curve
members into own structure
This allows easier assignment on file loading, keeps curve-
specific runtime data grouped and saves couple of bytes in
Object for non-curve types.
--
svn merge -r57938:57939 ^/branches/soc-2013-depsgraph_mt
svn merge -r57957:57958^/branches/soc-2013-depsgraph_mt
|
|
|
|
calculations for curve handles,
- add support for using the active point's orientation.
- add support for creating new custom orientations from curves.
- fix error where only the last selected curve handle was taken into account for manipulator orientations.
|
|
material texture
|
|
modifiers with text/curve/surface objects.
This is because the code here did not yet support the distinction between
generating the tesselated mesh at viewport/render resolution and generating a
separate displist/derivedmesh for render that is not stored in the object but
created and freed on the fly.
|
|
Without this, bezier curves at 12 resolution are very high detail for many tasks when converted from freehand strokes.
so add the option to convert 1:1 grease pencil points to curve polygons.
also add use_handles option to curve conversion which is used when converting beziers to poly lines.
|
|
|
|
|
