| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This option enables time profiling of background jobs, namely it's
measuring run time of the job and prints it to the console.
|
|
|
|
|
|
--debug
--debug-ffmpeg
--debug-python
--debug-events
--debug-wm
This makes debug output easier to read - event debug prints would flood output too much before.
For convenience:
--debug-all turns all debug flags on (works as --debug did before).
also removed some redundant whitespace in debug prints and prefix some prints with __func__ to give some context.
|
|
be able to see debug prints coming from FFmpeg or libmv independently
of general blender debug messages.
|
|
without the underscores these clogged up the namespace for autocompleation which was annoying.
|
|
|
|
|
|
|
|
http://markmail.org/message/fp7ozcywxum3ar7n
|
|
- define __BIG_ENDIAN__ or __LITTLE_ENDIAN__ with cmake & scons.
- ENDIAN_ORDER is now a define rather than a global short.
- replace checks like this with single ifdef: #if defined(__sgi) || defined (__sparc) || defined (__sparc__) || defined (__PPC__) || defined (__ppc__) || defined (__hppa__) || defined (__BIG_ENDIAN__)
- remove BKE_endian.h which isn't used
|
|
- Implement own undo stack for grease pencil, so now there'll be no keymaps conflicts.
- Supported redo's during sketch session.
- Get rid of flag stored in Globals -- use undo stack to check if grease pencil session is active.
|
|
Python one works)
|
|
- moved do_history into WM_write_file after successful write of .blend@ temporary file
- Added new file flag, to avoid writing history on writing the startup.blend, autosave files and undo.
Thanks Campbell, Brecht for review!
|
|
- opening a file with blender by passing it as an argument would and loading it once in blender left script auto execute flag in a different state.
- command line args --enable/disable-autoexec were being overridden by the user prefs.
|
|
|
|
- remove G.flag, its not used anywhere (and confusing with G.f).
- also remove strcpy where memory locations may overlap.
|
|
useful for testing with a predictable environment.
also commented python benchmark prints on exit, can enable when profiling later.
|
|
|
|
Both stored the filename of the blend file, but G.sce stored the last opened file.
This will make blender act differently in some cases since a relative path to the last opened file will no longer resolve (which is correct IMHO since that file isnt open and the path might not even be valid anymore).
Tested linking with durian files and rendering to relative paths when no files is loaded however we may need to have some operators give an error if they are used on the default startup.blend.
|
|
* Removed dynamic linking libTIFF code and change it to static linking
(built into the blender executable). Dynamic linking made things a
fair bit more complicated and wasn't working at all before on OS X -
the dylib didn't exist and wasn't being copied. Since TIFF is more heavily
depended upon now in Blender, it makes sense to make it less 'optional'
and more in line with other libraries.
I've updated both CMake and scons, and CMake on OS X/64bit works fine.
It's now up to other platform/build system maintainers to enable this for
their respective platforms (Campbell will check it for linux). For windows,
and non-64bit osx, we need static libtiff libraries in /lib.
I've added options WITH_TIFF for CMake and WITH_BF_TIFF for scons,
so if blender won't build because of this, you should be able to disable
these options until your build system has been updated.
* Bonus feature: while doing this, I added support for loading 16bit and 32bit
per channel TIFFs - they get converted to Blender's float buffers. Handy for
zbrush displacement maps!
|
|
drawing by default. since we use preview renders a lot the empties & armatures can get in the way also.
(commit 27511 by Campbell from render25 branch)
|
|
|
|
|
|
insensitive arguments, default handlers and other features that were hacked in the previous ugly switch system. Very simpler system for adding new arguments, easier to see conflicts and no more replication between BG and non BG mode arguments.
I've tested pretty much everything except GE options (-g options), but some small bugs could have sneaked in.
|
|
If you have a blend file and want to save in a new directory enabling this will save with the paths corrected relative to the new directory.
|
|
editing a lattice.
- proportional edit keybindings for particle and lattice
|
|
|
|
Auto save is now working again in 2.5. It will also remember now what
the location of the original file was when recovering it, so that
library links still work and saving the restored file does not save to
the temp directory. There is also a new Recover Auto Save operator
which will open the filebrowser in the temp directory and show the
auto saved .blends.
Implemenation Notes:
* Timer storage was moved from window to windowmanager, so we can have
windowmanager level timers too now, doesn't make sense to have
autosave timer attached to a particular window.
* FileGlobal now has a filename field storing where the file was saved.
Note that this is only used when loading a file through the recover
operators, regular file read doesn't use it, so copying the quit.blend
manually over the original file will still work as expected.
* Jobs timer no longer uses operator now, this seems more like an
internal thing, changing keymaps should not make it possible to break
the jobs manager.
* Autosave is postponed by 10 seconds when a modal operator is running,
e.g. transform or file browsing.
* Moved setting G.sce in setup_app_data before depsgraph updates, these
can use the filename for pointcaches.
|
|
- rename "Nurb" to "Spline" in RNA, eg. bpy.data.curves[0].splines[2].type == 'NURBS'
from a user perspective spline is a more generic term while Nurb is misleading when used for beziers and poly lines.
- added curve.active_spline property so the python UI can display the last selected curve.
- set the active spline when entering editmode (uses first selected spline)
- added back Hide Handles as a curve property (removed the global flag), access from the view panel in editmode.
- added hide normal option for curve, normal size access for curve and mesh display.
- changing orderU/V, endpoints, cyclic, bezierU/V now work in editmode and calls update functions.
- entering editmode was crashing with text objects
- curve.switch_direction() crashed (own fault from last commit)
- Tkey for tilt was overridden by Toolbar, made Tilt Ctrl+T.
- OBJECT_OT_mode_set check for compatible modes before running - so curves dont try go into paint mode with V key for eg.
|
|
* Added Shading and Performance panels in the scene buttons,
containing the options previously in the 2.4x game menu.
* Added show framerate/debug/physics/warnings back in game menu.
* Moved these settings from G.fileflags to scene GameData.
* Enabled Display Lists by default.
* Some other small game scene button tweaks.
|
|
* Made particle edit object-localized.
|
|
* Made texture paint object-localized too.
Note for Brecht: gpu_draw.c had three uses of G_TEXTUREPAINT that I was not able to cleanly fix, so commented out for now. Can you take a look and see what should be done here?
|
|
* Weightpaint is now object-local like sculpt and vertexpaint.
* Fixed a bug spotted by DingTo, going from editmode to sculptmode didn't fully leave editmode
|
|
* Made vertex paint local to object, like sculpt mode.
* New test for vertex paint is (ob->mode & OB_MODE_VERTEX_PAINT)
|
|
* Replaced FACESEL_PAINT_TEST macro with paint_facesel_test. This removes one more thing from BKE_global, and it'll make it easier to localize.
* Fixed sculpt paint cursor sometimes not showing.
|
|
* Made sculpt mode local to object.
* This also fixes loading files from 2.4x saved in sculptmode
Touched a lot of things here, let me know if anything breaks
TODO:
* The other paint modes should be converted as well
|
|
* Removed CD Actuator
* Removed bSample and bSoundListener
* Removed SoundSystem
* Removed -noaudio parameter
|
|
1) Remove WITH_FREETYPE2 from code, so now blender always need freetype2
2) Remove the old bmfont
3) Remove ftfont and bFTGL library
4) Implement a new BLF_draw_default function for place that still need/use
the old BMF api.
I try to update both, scons and cmake, but I only can test with make, so
hope all work fine.
MSVC is broken, but I don't have Windows, things to search and fix are
any reference to WITH_FREETYPE2, FTGL and BMFONT (take in care that
blenkernel also have a BKE_bmfont.h, this don't have anything to do with bmfont).
Always have to link/include the freetype2 library
Remove any reference to libbmfont
Remove any reference to libftfont
Remove any reference to libbftgl (or libbFTGL)
|
|
Edit Mesh:
- Added back "Edge Shortest Path select"
It now also does regular selection, more fun!
It's mapped to CTRL+click now, and makes or clears selections
between current and previously activated edge.
Seam/Sharp/etc marking is a toolsetting mode still. These
options cannot become properties easily, because the tool
uses the properties of selected edge to clear...
- Removed a whole bunch of G.f flags, related to mesh drawing.
It's all now local in me->drawflags. Here's the list of
removed old globals:
G_DRAWEDGES
G_DRAWFACES
G_DRAWNORMALS
G_DRAW_VNORMALS
G_ALLEDGES
G_HIDDENEDGES
G_DRAWCREASES
G_DRAWSEAMS
G_DRAWSHARP
G_DRAWBWEIGHTS
G_DRAW_EDGELEN
G_DRAW_FACEAREA
G_DRAW_EDGEANG
|
|
-r17853:HEAD
|
|
Font object + editing back.
Was quite some work due to a myriad of globals all over!
Works nicely 100% local now.
To enable a single textedit operator, I've added a new
keymap entry KM_TEXTEDIT, which gives all keyboard events
to the handler. Also had to add a new keymap-add function
to force a keymap handler in beginning of region handlers.
In future this can be used to prioritize handlers.
Also: split off the arrow keys (frame change) to a separate
region level handler. Can be set with default flag in
regiontype->keymapflag ED_KEYMAP_FRAMES
|
|
- Depricated another bunch of globals; all the totobj,
totmesh, totvert, and so on.
- All code that needs such totals now count it themselves,
these stats were not supposed to be reliable
- Editmesh now stores and manages own totals.
- Todo: make a scene->stats that tracks notifiers.
Bugfix: selecting failed in editmesh, backbuffer stuff was
too late, already using index ranges before it was set.
|
|
Testing commit; this puts back support for swap-exchange graphics
cards, which I had hoped to have faded out... but it appears it
still does it for intel and some atis.
This only swap-exchanges properly for areas/regions, not for
menus or the 'action zone triange'. Let's see if it works!
You enable it with starting with commandline option -E
|
|
- remove Verse support. This will be brought back in The Future (probably jiri + me)
This means 5k lines less in blenkernel.
- fix two small errors for global cleanup, now compiles properly with FFMPEG enabled too.
|
|
Think global, act local!
The old favorite G.scene gone! Man... that took almost 2 days.
Also removed G.curscreen and G.edbo.
Not everything could get solved; here's some notes.
- modifiers now store current scene in ModifierData. This is not
meant for permanent, but it can probably stick there until we
cleaned the anim system and depsgraph to cope better with
timing issues.
- Game engine G.scene should become an argument for staring it.
Didn't solve this yet.
- Texture nodes should get scene cfra, but the current implementation
is too tightly wrapped to do it easily.
|
|
From the anti-globalization department:
G.obedit terminated!
Wherever possible, use CTX_data_edit_object(C) to get this
now. It's stored in scene now, and the screen context has
it defined.
|
|
So, editmode mesh is back! :)
At the moment only TABkey works and mouse select, 1 vertex at a
time. More will follow of course.
Note for the devs:
- G.editMesh has been removed, be careful with old code.
- EditMesh now is property of Mesh itself
Although it means unlimited editmodes, for migration purposes we
better stick to 1 "obedit" per scene, which is in Context too
- G.obedit will get removed soon, so use CTX_data_edit_object(C)
Or if you can't, just scene->obedit for now
- Also removed the CTX_data_edit_mesh(), this has no meaning
anymore. EditMesh is not context senstitive anymore, only the
edit-object for time being is.
- Martin: I've already tucked some EditMesh pointer in T and
removed all G.editMesh there.
|
|
* G.version removed, use BLENDER_VERSION
* G.order removed, ENDIAN_ORDER
* G.vd, G.sipo, G.buts, G.sima, .. removed.
* G.qual removed
* G.simulf removed (was unused in 2.4x)
* error() and some other unused stubs removed
|
