Age | Commit message (Collapse) | Author |
|
Lattice deformation used to store some runtime data
inside of lattice datablock itself. It's something
which is REALLY bad. Ideally DNA shouldn't contain
and runtime data.
For now solved it in a way that initialization of
lattice deform will create a structure which contains
lattice object for which deformation is calculating
and that runtime data which used to be stored in
lattice datablock itself.
It works really fine for mesh deform modifier, but
there's still runtime data stored in particle system
DNA, It didn't look something easy to be solved, so
leaving this as-is for now.
--
svn merge -r58277:58278 -r58795:58796 ^/branches/soc-2013-depsgraph_mt
|
|
from an index.
- BKE_lattice_index_from_uvw()
- BKE_lattice_index_to_uvw()
|
|
by Kevin Mackay (yakca)
Was one of our TODO's from the wiki.
|
|
Issue was caused by couple of circumstances:
- Normal Map node requires tesselated faces to compute tangent space
- All temporary meshes needed for Cycles export were adding to G.main
- Undo pushes would temporary set meshes tessfaces to NULL
- Moving node will cause undo push and tree re-evaluate fr preview
All this leads to threading conflict between preview render and undo
system.
Solved it in way that all temporary meshes are adding to that exact
Main which was passed to Cycles via BlendData. This required couple
of mechanic changes like adding extra parameter to *_add() functions
and adding some *_ex() functions to make it possible RNA adds objects
to Main passed to new() RNA function.
This was tricky to pass Main to RNA function and IMO that's not so
nice to pass main to function, so ended up with such decision:
- Object.to_mesh() will add temp mesh to G.main
- Added Main.meshes.new_from_object() which does the same as to_mesh,
but adds temporary mesh to specified Main.
So now all temporary meshes needed for preview render would be added
to preview_main which does not conflict with undo pushes.
Viewport render shall not be an issue because object sync happens from
main thread in this case.
It could be some issues with final render, but that's not so much
likely to happen, so shall be fine.
Thanks to Brecht for review!
|
|
|
|
|
|
|
|
|
|
also use ..._find_name(..., name) rather then ..._find_named(..., name) --- both were used.
|
|
|
|
- replace inline face UV center calc.
- use const float[3] for mesh and uv functions.
- remove unused define
|
|
* This patch adds a influence slider for the lattice modifier, which affects the strength of the deformation.
Patch by Patrick Boelens (senshi), thanks a lot!
|
|
without the underscores these clogged up the namespace for autocompleation which was annoying.
|
|
comments is silly, may as well have in declaration)
|
|
also removed some unused function definitons.
|
|
http://markmail.org/message/fp7ozcywxum3ar7n
|
|
|
|
flagged as PROP_THICK_WRAP.
Also use const char in many other parts of blenders code.
Currently this gives warnings for setting operator id, label and description since these are an exception and allocated beforehand.
|
|
Fix #21187: 2.5svn26947 - particles + meta sphere = crash in rendering
Use separated displists for mballs in view3d and render stuff.
Do not recalculate displist for view3d while rendering - mball.c
uses several global variables which shouldn't be accepted from
parallel threads.
|
|
|
|
|
|
- restored three more C files: editlattice, editkey
and editgroup
- editmode lattice working, (mouse select works)
- accidentally removed yesterday 3d cursor drawing
- removed global editLatt entirely now.
|
|
More globals discovered; lattice deform stored static
deform array and a matrix. Tsk!
|
|
Think global, act local!
The old favorite G.scene gone! Man... that took almost 2 days.
Also removed G.curscreen and G.edbo.
Not everything could get solved; here's some notes.
- modifiers now store current scene in ModifierData. This is not
meant for permanent, but it can probably stick there until we
cleaned the anim system and depsgraph to cope better with
timing issues.
- Game engine G.scene should become an argument for staring it.
Didn't solve this yet.
- Texture nodes should get scene cfra, but the current implementation
is too tightly wrapped to do it easily.
|
|
|
|
|
|
blocks that were previously missed; and b) greatly increase my
ohloh stats!
|
|
This allows to mix between the result of 2 modifiers, with both
using the same input state. This is useful for having a mesh deform
and armature deform working together.
However! This functionality could have been presented better...
this is actually Node editor stuff!
Now it works by adding a "MM" button, next to the "overall vgroup"
option. If MM is pressed, the input of this modifier is the same as
the input of the previous modifier.
Only the armature modifier has this option now...
|
|
===============================
An improved CrazySpace correction is now used for Armature modifiers that use
vertex groups, and that are the first enabled modifiers in the stack. This is
a a specific case, but also a common one.
http://www.blender.org/development/current-projects/changes-since-244/skinning/
Implementation Notes:
- The quaternion crazyspace correction is still used for modifiers other than
the armature modifier.
- Modifiers can now provide a deform matrix per vertex to be used for
crazyspace correction, only the armature modifier implements this now.
|
|
previously only some datatypes adding functions accepted a name.
also updated the Bpy.py epydocs
|
|
- FORWARD CYCLING & MATCHING
Up to no now, adding multiple actions in NLA with walkcycles required to
animate them standing still, as if walking on a conveyor belt. The stride
option then makes the object itself move forward, trying to keep the foot
stuck on the floor (with poor results!).
This option now allows to make walk cycles moving forward. By
indicating a reference Offset Bone, the NLA system will use that bone to
detect the correct offset for the Armature Pose to make it seamlessly going
forward.
Best of all, this option works as for cyclic Action Strips as well as for
individual Action Strips. Note that for individual strips, you have to set
the strip on "Hold". (Might become automatic detected later).
Here's an example edit image for NLA:
http://www.blender.org/bf/nla_match-cycle.jpg
And the animation for it:
http://download.blender.org/demo/test/2.43/0001_0150_match.avi
Blender file:
http://download.blender.org/demo/test/2.43/mancandy_matching.blend
Using this kind of cycling works pretty straightforward, and is a lot
easier to setup than Stride Bones.
To be further tested:
- Blending cycles
- matching rotation for the bones as well.
- ACTION MODIFIERS (motion deformors)
The above option was actually required for this feature. Typically walk
cycles are constructed with certain Bones to be the handles, controlling
for example the torso or feet.
An Action Modifier allows you to use a Curve Path to deform the motion of
these controlling bones. This uses the existing Curve Deformation option.
Modifiers can be added per Action Strip, each controlling a channel (bone)
by choice, and even allows to layer multiple modifiers on top of each other
(several paths deforming motion). This option is using the dependency graph,
so editing the Curve will give realtime changes in the Armature.
The previous walkcycle, controlled by two curves:
http://download.blender.org/demo/test/2.43/0001_0150_deform.avi
Blender file:
http://download.blender.org/demo/test/2.43/mancandy_actiondeform.blend
Action Modifiers can be added in the NLA Properties Panel. Per Modifier you
have to indicate the channel and a Curve Object. You can copy modifiers from
one strip to another using CTRL+C (only copies to active Object strips).
Setting up a correct Curve Path has to be carefully done:
- Use SHIFT+A "Curve Path" in top view, or ensure the path is not rotated.
- make sure the center point of the Curve Object is at the center of the
Armature (or above)
- move the first point of the curve to the center point as well.
- check if the path starts from this first point, you can change it using
(in Curve EditMode) the option Wkey -> "Switch Direction"
- Make sure alignment uses the correct axis; if the Armature walks into
the negative Y direction, you have to set in Object Buttons, "Anim settings"
Panel, the correct Track option. (Note; option will probably move to the
Modifier later).
This is a good reason to make such paths automatic (on a command). Is on the
todo list.
Also note this:
- the Curve Path extends in beginning and ending, that's (for now) the default,
and allows to use multiple paths. Make sure paths begin and end horizontal.
- Moving the Curve in Object Mode will change the "mapping" (as if the landscape
a character walks over moves). Moving the Curve in Edit Mode will change the
actual position of the deformation.
- Speed (Ipos) on paths is not supported yet, will be done.
- The Curve "Stretch" deform option doesn't work.
- Modifiers are executed *after* all actions in NLA are evaluated, there's no
support yet for blending multiple strips with Modifiers.
- This doesn't work yet for time-mapping...
This commit is mostly for review by character animators... some details or
working methods might change.
This feature can also be used for other modifiers, such as noise (Perlin) or
the mythical "Oomph" (frequency control) and of course Python.
Special thanks to Bassam & Matt for research & design help. Have fun!
|
|
settings, rather than using the object's TrackX/Y/Z/etc buttons.
This is good for two reasons: a) having the settings over in the object buttons
before was terribly unintuitive and hidden, now it's more visible how to
control the deformation, and b) now if you have more than one curve modifier,
they can have their own settings, instead of being forced to use the object
level data.
|
|
a vertex group which will modulate the influence of all bones in the armature.
This commit also tidies up the height of the modifier panels; they should all
have the same size margin now.
|
|
main features are:
* Modifiers can now be in any order in the modifier stack
* DerivedMesh now has a standard framework for custom element data to be passed
through the stack with mesh data (being copied and interpolated as
appropriate), so modifiers can access whatever data they need
* The modifier stack code has been refactored and a number of bugs have been
removed
* The EdgeSplit modifier has been added:
http://mediawiki.blender.org/index.php/BlenderDev/EdgeSplitModifier
* The DerivedMesh modifier has been added:
http://mediawiki.blender.org/index.php/BlenderDev/DisplaceModifier
* The UVProject modifier has been added:
http://mediawiki.blender.org/index.php/BlenderDev/UVProjectModifier
For more info, see:
http://mediawiki.blender.org/index.php/User:Artificer/ModifierStackUpgrade
(currently undergoing reorganisation)
|
|
to finetune deform further as well.
Note that curve deform requires object buttons 'track' and 'up' axes set
properly. Curve deform can twist/flip a lot, making Vertex Group based
deform hard to set up.
|
|
The "Use VGroup" or "Use Envelope" options now are in Modifier Panel
for Armature deform.
If Modifiers are in use, they override the Armature settings for it.
(Cannot get rid of the Armature panel options yet, since Blender still
allows parenting to be deforming too, which is displayed as a Virtual
modifier now)
This now allows to - for example - make a Envelope deform on a Lattice,
and have same Armature use vertexgroups on Mesh.
Next; vertexgroup option for Lattice & Curve deform
|
|
- new feature, twiddled with lattice resizing to try to maintain
existing vertex changes... much nicer than just resetting the
lattice if you decide you need more detail in the lattice.
- modifiers work with lattices now. yes, that does mean you
can make a chain of lattices effecting each other 8 miles
long.
- some cleanup of softbody code, was rather splintered and call
path was twisted and confusing. reworked main object step
routine to do things in a more obvious and consistent manner
and without duplicate code
- added ob->softflag OB_SB_RESET instead of sbObjectReset
call
- modifier changes reset softbody now
- moved curve_getVertexCos/curve_applyVertexCos into curve.c
- update curve modifier eval to work with virtual modifiers
- update modifier apply to work with curves/surfs
- update make parent to also recalc object data
NOTE: Although you can turn SB on for curve/font objects at the
moment it doesn't really work because they call deform in
multiple steps and this confuses SB. Not sure how to deal with
atm.
|
|
- some tweaks to modifier UI thanks to Bart (aligning buttons)
|
|
- removed {lattice,curve}_modifier functions
- changed render code to use displist for curve rendering
instead of making its own. required adding a bevelSplitFlag
field to DispList. I also fixed the bevel face splitting
which did not work correctly in many situations.
- changed so all curve data creation happens in makeDispListCurveTypes,
includes making bevel list and filling polys
- changed render code to use displist for surface rendering
- removed Curve.orco variable, built as needed now
- removed stupid BLI_setScanFill* functions... why use a function
argument when you can use a global and two functions! Why indeed.
(this fixed crash when reloading a file with filled curves and
toggling editmode)
- bug fix, setting curve width!=1 disabled simple bevel for no
apparent reason
- cleaned up lots and lots of curve/displist code (fun example:
"if(dl->type==DL_INDEX3 || dl->type==DL_INDEX3)"). Hmmm!
- switched almost all lattice calls to go through lattice_deform_verts,
only exception left is particles
- added DBG_show_shared_render_faces function in render, just
helps to visualize which verts are shared while testing (no
user interface).
- renamed some curve bevel buttons and rewrote tooltips to be
more obvious
- made CU_FAST work without dupfontbase hack
Also by the way I wrote down some notes on how curve code
works, nothing spiffy but it is at:
http://wiki.blender.org/bin/view.pl/Blenderdev/CurveNotes
|
|
- removed mesh_deform (merge into mesh_modifier)
- switch python lattice_apply function to use object_apply_deform,
this isn't exactly equivalent but the python system shouldn't
have been calling that deep into the kernel anyway.
New feature: Modifier stack
- added Object.modifiers (list of ModifierData elements)
- added DNA_modifier_types.h
o contains type definition for the file data for the various
modifier types
- added BKE_modifier.h
o contains modifierType_get_info (access to modifier type registry)
o structs and defines for runtime modifier usage
- updated mesh_calc_modifiers to evaluate modifier stack (note that
for the time being it also evaluates the old style modifiers so files
should load and work as normal).
- add file handling modifier code (todo: don't replicate on object copy)
- add modifier stack UI code (lives in object panel)
Only real new feature at the moment is that you can apply lattices and
curves *after* a subdivision surface which was never possible before.
Todo:
- DEP graph updating does not work correctly yet, so you generally have
to tab cycle to see results.
- editmode calculation does not use modifier stack.
- bug fixes (there must be a few in there somewhere)
|
|
- changed mesh_modifier, sbObjectStep, object_deform to take vertexCo
argument instead of operating on mesh
- fixed bug where a derived mesh would not be returned in editmode
- removed object_wave, replaced by init_wave_deform and calc_wave_deform
- moved cached DerivedMesh to Object, not Mesh... fixes heisenbugs
with linked objects
|
|
Right now, it works for Meshes (all deformers including Curve) and for
Curve/Surfaces (only hooks).
More follows.
|
|
|
|
So we should be all set now :)
Kent
--
mein@cs.umn.edu
|
|
(adding)
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
also the Makefile.in's were from previous patch adding
the system depend stuff to configure.ac
Kent
--
mein@cs.umn.edu
|
|
little minor spacing issues.
|
|
|