| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
This only applies to ID being copied outside of bmain. Handy for cases when it
is important to check if the copy corresponds to a data block coming from
library.
Example of that is proxy evaluation with copy on write.
Thanks Bastien for review!
|
|
This function swaps the memory content of two data-blocks (of same type
obviously), while preserving most of the ID 'header' itself.
It is intended to be used to quickly and easily replace the data of an
existing ID by another one, presumably a temporary 'working' one,
without having to suffer from things like name changes,
registering/removing from Main database, etc.
|
|
|
|
|
|
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
|
|
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
|
|
|
|
Noisy change, but safe, and better do it sooner than later if we are to
rework copying code. Also, previous commit shows this *is* useful to
catch some mistakes.
|
|
|
|
|
|
|
|
|
|
|
|
This function is similar to BKE_libblock_free but does no DEG
tagging or any extra things, just operates on memory.
|
|
|
|
Optionally it'll also give name used for memory allocation.
|
|
We went for a new datablock because blending probe functionality with empties was going to be messy.
|
|
This commit does the main integration of workspaces, which is a design we agreed on during the 2.8 UI workshop (see https://wiki.blender.org/index.php/Dev:2.8/UI/Workshop_Writeup)
Workspaces should generally be stable, I'm not aware of any remaining bugs (or I've forgotten them :) ). If you find any, let me know!
(Exception: mode switching button might get out of sync with actual mode in some cases, would consider that a limitation/ToDo. Needs to be resolved at some point.)
== Main Changes/Features
* Introduces the new Workspaces as data-blocks.
* Allow storing a number of custom workspaces as part of the user configuration. Needs further work to allow adding and deleting individual workspaces.
* Bundle a default workspace configuration with Blender (current screen-layouts converted to workspaces).
* Pressing button to add a workspace spawns a menu to select between "Duplicate Current" and the workspaces from the user configuration. If no workspaces are stored in the user configuration, the default workspaces are listed instead.
* Store screen-layouts (`bScreen`) per workspace.
* Store an active screen-layout per workspace. Changing the workspace will enable this layout.
* Store active mode in workspace. Changing the workspace will also enter the mode of the new workspace. (Note that we still store the active mode in the object, moving this completely to workspaces is a separate project.)
* Store an active render layer per workspace.
* Moved mode switch from 3D View header to Info Editor header.
* Store active scene in window (not directly workspace related, but overlaps quite a bit).
* Removed 'Use Global Scene' User Preference option.
* Compatibility with old files - a new workspace is created for every screen-layout of old files. Old Blender versions should be able to read files saved with workspace support as well.
* Default .blend only contains one workspace ("General").
* Support appending workspaces.
Opening files without UI and commandline rendering should work fine.
Note that the UI is temporary! We plan to introduce a new global topbar
that contains the workspace options and tabs for switching workspaces.
== Technical Notes
* Workspaces are data-blocks.
* Adding and removing `bScreen`s should be done through `ED_workspace_layout` API now.
* A workspace can be active in multiple windows at the same time.
* The mode menu (which is now in the Info Editor header) doesn't display "Grease Pencil Edit" mode anymore since its availability depends on the active editor. Will be fixed by making Grease Pencil an own object type (as planned).
* The button to change the active workspace object mode may get out of sync with the mode of the active object. Will either be resolved by moving mode out of object data, or we'll disable workspace modes again (there's a `#define USE_WORKSPACE_MODE` for that).
* Screen-layouts (`bScreen`) are IDs and thus stored in a main list-base. Had to add a wrapper `WorkSpaceLayout` so we can store them in a list-base within workspaces, too. On the long run we could completely replace `bScreen` by workspace structs.
* `WorkSpace` types use some special compiler trickery to allow marking structs and struct members as private. BKE_workspace API should be used for accessing those.
* Added scene operators `SCENE_OT_`. Was previously done through screen operators.
== BPY API Changes
* Removed `Screen.scene`, added `Window.scene`
* Removed `UserPreferencesView.use_global_scene`
* Added `Context.workspace`, `Window.workspace` and `BlendData.workspaces`
* Added `bpy.types.WorkSpace` containing `screens`, `object_mode` and `render_layer`
* Added Screen.layout_name for the layout name that'll be displayed in the UI (may differ from internal name)
== What's left?
* There are a few open design questions (T50521). We should find the needed answers and implement them.
* Allow adding and removing individual workspaces from workspace configuration (needs UI design).
* Get the override system ready and support overrides per workspace.
* Support custom UI setups as part of workspaces (hidden panels, hidden buttons, customizable toolbars, etc).
* Allow enabling add-ons per workspace.
* Support custom workspace keymaps.
* Remove special exception for workspaces in linking code (so they're always appended, never linked). Depends on a few things, so best to solve later.
* Get the topbar done.
* Workspaces need a proper icon, current one is just a placeholder :)
Reviewed By: campbellbarton, mont29
Tags: #user_interface, #bf_blender_2.8
Maniphest Tasks: T50521
Differential Revision: https://developer.blender.org/D2451
|
|
The absence of datablock properties "will certainly be resolved soon as the need for them is becoming obvious" said the [[http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.67/Python_Nodes|Python Nodes release notes]]. So this patch allows Python scripts to create ID Properties which reference datablocks.
This functionality is implemented for `PointerProperty` and now such properties can be created with Python.
In addition to the standard update callback, `PointerProperty` can have a `poll` callback (standard RNA) which is useful for search menus. For details see the test included in this patch.
Original author: @artfunkel
Alexander (Blend4Web Team)
Reviewers: brecht, artfunkel, mont29, campbellbarton
Reviewed By: mont29, campbellbarton
Subscribers: jta, sergey, campbellbarton, wisaac, poseidon4o, mont29, homyachetser, Evgeny_Rodygin, AlexKowel, yurikovelenov, fjuhec, sharlybg, cardboard, duarteframos, blueprintrandom, a.romanov, BYOB, disnel, aditiapratama, bliblubli, dfelinto, lukastoenne
Maniphest Tasks: T37754
Differential Revision: https://developer.blender.org/D113
|
|
Use Main->relations in BKE_library_foreach_ID_link(), when possible
(i.e. IDWALK_READONLY is set), and if the data is available of course.
This is quite minor optimization, no sensible improvements are expected,
but does not hurt either to avoid potentially tens of looping over e.g.
objects constraints and modifiers, or heap of drivers...
|
|
The new MainIDRelations stores two mappings, one from ID users to ID
used, the other vice-versa.
That data is assumed to be short-living runtime, code creating it is
responsible to clear it asap. It will be much useful in places where we
handle relations between IDs for a lot of them at once.
Note: This commit is not fully functional, that is, the infamous, ugly,
PoS non-ID nodetrees will not be handled correctly when building relations.
Fix needed here is a bit noisy, so will be done in next own commit.
|
|
Was a waaaaayyyyy to much generic name for such a specific func, renamed
to much more descriptive BKE_libblock_relink_to_newid().
In near future (few weeks, to limit as much as possible silent mismatch
in branches), will rename BKE_libblock_relink_ex to BKE_libblock_relink,
this is the real generic data-block relinking func!
|
|
This aims at always ensuring that ID.newid (and relevant LIB_TAG_NEW)
stay in clean (i.e. cleared) state by default.
To achieve this, instead of clearing after all id copy call (would be
horribly noisy, and bad for performances), we try to completely remove
the setting of id->newid by default when copying a new ID.
This implies that areas actually needing that info (mainly, object editing
area (make single user...) and make local area) have to ensure they set
it themselves as needed.
This is far from simple change, many complex code paths to consider, so
will need some serious testing. :/
|
|
This has nothing to do here (freeing is not unlinking/remapping!), and
was actually redoing something already taken care of by
`BKE_libblock_relink_ex()` call in `BKE_libblock_free_ex()`.
Also, gives some noticeable speedup when removing datablocks with
do_unlink=True, about 5 to 10% quicker e.g. when deleting all objects
from a py console, in a big production file...
|
|
This makes heavy scenes to be freed almost instantly (so now
quadbot scene takes only 0.06sec to free),
|
|
Added BKE_libblock_free_data_ex() which takes special do_id_user
argument which basically indicates whether main database was already
taken care about not having "dead" pointers.
Gives about 40% speedup of main database free with quadbot scene
(3.4sec vs. 5.4 sec on quite powerful desktop).
|
|
This is required since new dependency graph evaluates drivers in threads
so it was possible to have some partially written ID tag there.
|
|
Issue here was that py API code was keeping references (pointers) to the
liniked data-blocks, which can actually be duplicated and then deleted
during the 'make local' process...
Would have like to find a better way than passing optional GHash to get
the oldid->newid mapping, but could not think of a better idea.
|
|
this patch resolves the following warnings;
```
Warning C4028 formal parameter 1 different from declaration blenkernel\intern\ocean.c 764
Warning C4098 'attach_stabilization_baseline_data': 'void' function returning a value blenkernel\intern\tracking_stabilize.c 139
Warning C4028 formal parameter 3 different from declaration blenkernel\intern\cachefile.c 148
Warning C4028 formal parameter 3 different from declaration blenkernel\intern\paint.c 413
Warning C4028 formal parameter 1 different from declaration blenkernel\intern\editderivedmesh.c 591
Warning C4028 formal parameter 3 different from declaration blenkernel\intern\library_remap.c 709
Warning C4028 formal parameter 1 different from declaration blenkernel\intern\ocean.c 754
Warning C4028 formal parameter 1 different from declaration blenkernel\intern\ocean.c 758
Warning C4028 formal parameter 1 different from declaration blenkernel\intern\ocean.c 759
Warning C4028 formal parameter 1 different from declaration blenkernel\intern\ocean.c 763
Warning C4028 formal parameter 1 different from declaration blenkernel\intern\ocean.c 764
Warning C4028 formal parameter 1 different from declaration blenkernel\intern\ocean.c 765
Warning C4028 formal parameter 1 different from declaration blenkernel\intern\ocean.c 769
Warning C4028 formal parameter 1 different from declaration blenkernel\intern\ocean.c 770
Warning C4028 formal parameter 1 different from declaration blenkernel\intern\DerivedMesh.c 3458
```
It's mostly things where the signature in the .h and the actual implementation in the .c do not match. And a bunch functions who do not match the TaskRunFunction declaration cause they leave out the __restrict keyword.
Reviewers: brecht, juicyfruit, sergey
Reviewed By: sergey
Subscribers: Blendify
Differential Revision: https://developer.blender.org/D2268
|
|
All in all, this patch adds an Alembic importer, an Alembic exporter,
and a new CacheFile data block which, for now, wraps around an Alembic
archive. This data block is made available through a new modifier ("Mesh
Sequence Cache") as well as a new constraint ("Transform Cache") to
somewhat properly support respectively geometric and transformation data
streaming from alembic caches.
A more in-depth documentation is to be found on the wiki, as well as a
guide to compile alembic: https://wiki.blender.org/index.php/
User:Kevindietrich/AlembicBasicIo.
Many thanks to everyone involved in this little project, and huge shout
out to "cgstrive" for the thorough testings with Maya, 3ds Max, Houdini
and Realflow as well as @fjuhec, @jensverwiebe and @jasperge for the
custom builds and compile fixes.
Reviewers: sergey, campbellbarton, mont29
Reviewed By: sergey, campbellbarton, mont29
Differential Revision: https://developer.blender.org/D2060
|
|
BKE_id_copy_ensure_local function.
|
|
Turns out most BKE_foo_make_local datablock-specific functions are actually doing
exactly the same thing, only two currently need special additional operations
(object and brush ones). So added a BKE_id_make_local_generic instead
of copying same code over and over.
Also, changed a bit how make_local works in case we are localizing a whole library.
We need to do the 'remap' step (from old linked ID to new local one) in the second loop,
otherwise we miss some dependencies. This fixes main part of T48907.
|
|
used locally.
Will be used by link/append code.
|
|
Idea looked good, but we have too much custom situations here (some half-fake-sub-ID
being copied with their 'owner', animdata, etc.), let's let datablock copy functions
handle that themselves.
Also allows to safely call BKE_id_expand_local from all copy functions now (only when
copying linked data).
|
|
will be used by both make_local() and copy() datablock functions.
Note that this new func make 'extern' all IDs used by localized datablock,
not only refcounted ones as it used to be in each type's functions (with a few exceptions).
|
|
Also allows us to get rid of a few _copy_ex() versions...
|
|
Totally stupid to not pass it, and then let (some) BKE_foo_make_local() use G.main!
Note: unused for now, much more refactoring still to come in make_local area!
|
|
handling).
This commit changes a lot of how IDs are handled internally, especially the unlinking/freeing
processes. So far, this was very fuzy, to summarize cleanly deleting or replacing a datablock
was pretty much impossible, except for a few special cases.
Also, unlinking was handled by each datatype, in a rather messy and prone-to-errors way (quite
a few ID usages were missed or wrongly handled that way).
One of the main goal of id-remap branch was to cleanup this, and fatorize ID links handling
by using library_query utils to allow generic handling of those, which is now the case
(now, generic ID links handling is only "knwon" from readfile.c and library_query.c).
This commit also adds backends to allow live replacement and deletion of datablocks in Blender
(so-called 'remapping' process, where we replace all usages of a given ID pointer by a new one,
or NULL one in case of unlinking).
This will allow nice new features, like ability to easily reload or relocate libraries, real immediate
deletion of datablocks in blender, replacement of one datablock by another, etc.
Some of those are for next commits.
A word of warning: this commit is highly risky, because it affects potentially a lot in Blender core.
Though it was tested rather deeply, being totally impossible to check all possible ID usage cases,
it's likely there are some remaining issues and bugs in new code... Please report them! ;)
Review task: D2027 (https://developer.blender.org/D2027).
Reviewed by campbellbarton, thanks a bunch.
|
|
all indirectly linked data.
Previous to 2.77, this used to be default behavior, was changed in rB591f4549c958b.
However, in most append cases, you do want a full localization of your data, so this new behavior
is kept by default, but there is now an option in append operator to only localize the 'first level'
of data (i.e. datablocks from linked library itself, and not those from other 'sub-libraries').
|
|
increase 'real' user count.
This has several benefits:
* User count remains coherent, regardless of the order in which you use 'user_one' & real refcounting users
(i.e. if you add to group, and then link in scene, or the reverse, you now always get same final user count).
* Avoids the need to check for potential 'user_one' extra user in count in several places in code (e.g. when
making IDs single users...).
* Users won't wonder why they cannot make 'single user' and ID even though its user count shows '2'!
* readfile.c now always uses code from BKE's library.c when modifying id->us. Which means we can consider
(asside from assignment during initialization) that id->us is read-only outside of library.c context.
Note that this commit reverts previous one (rB6b1d77a8052b) - please **do not** backport this one in 2.77.
|
|
Move to re-usable BKE_blendfile_write_partial API
|
|
object.
Also re-reported through IRC by Thomas Beck (@plasmasolutions), thanks.
Though it's not ideal in theory, we have quite poor handling of object datablock currently
from user PoV - before this commit, it was not easily possible to get fully rid of an object
anymore if you did not removed it from all its groups before deleting it.
So for now, restore 2.76 behavior (namely, unlink an object from avaerything in Blender
once it is no more used by any scene).
Better handling of all this is TODO for later (also related to much more heavy changes
done in id-remap branch regarding sanitizing our ID deletion process).
|
|
BKE_main_id_tag_/BKE_main_id_flag_ were horrible naming now that we split those
into flags (for presistent one) and tags (for runtime ones).
Got rid of previous 'tag_' functions behavior (those who were dedicated shortcuts
to set/clear LIB_TAG_DOIT), so now '_tag_' functions affect tags, and '_flag_'
functions affect flags.
|
|
|
|
each newly appended item except Groups and Objects.
|
|
- test_idbutton -> BLI_libblock_ensure_unique_name (not only used from UI)
- BKE_rename_id -> BKE_libblock_rename (always pass valid main)
also rename:
- name_uiprefix_id -> BKE_id_uiprefix
|
|
* Don't copy name before entering new_id function. new_id does that for
us already.
* Take a main argument to make the function possible to use with
different databases
* Append BKE_ to rename_id
|
