Age | Commit message (Collapse) | Author |
|
Support virtual modifiers when using applying the modifier as a shape.
|
|
|
|
Also remove unnecessary parantheses.
|
|
|
|
This function only makes sense for undo which doesn't
initialize the meshes ID. Otherwise BKE_id_free should be used.
|
|
It wasn't obvious this didn't free the memory of the mesh it's self
leading to memory leaks.
|
|
This supported calculating normals for MPoly array which was copied to
an MFace aligned array.
Remove the functions entirely since MFace use is being phased out and
these function isn't used anywhere.
|
|
Remove the 'only_face_normals' argument.
- BKE_mesh_calc_normals_poly for polygon normals.
- BKE_mesh_calc_normals_poly_and_vertex for poly and vertex normals.
Order arguments logically:
- Pair array and length arguments.
- Position normal array arguments (to be filled) last.
|
|
Because mesh vertex and face normals are just derived data, they can
be calculated lazily instead of eagerly. Often normal calculation is
a relatively expensive task, and the calculation is often redundant
if the mesh is deformed afterwards anyway.
Instead, normals should be calculated only when they are needed. This
commit moves in that direction by adding a new function to tag a mesh's
normals dirty and replacing normal calculation with it in some places.
Differential Revision: https://developer.blender.org/D12107
|
|
Supported multi-threading for bm_mesh_loops_calc_normals.
This is done by operating on vertex-loops instead of face-loops.
Single threaded operation still loops over faces since iterating
over vertices adds some overhead in the case of custom-normals
as the order used for accessing loops must be the same as iterating
of a faces loops.
From isolated timing tests of bm_mesh_loops_calc_normals on high
poly models, this gives between 3.5x to 10x speedup,
with larger gains for meshes with custom-normals.
NOTE: this is part one of two patches for multi-threaded auto-smooth,
tagging edges as sharp is still single threaded.
Reviewed By: mont29
Ref D11928
|
|
Also use `const Curve *` instead of `const Object *`, since the
function works at a lower level than objects anyway.
And also remove another unused function. Since this section of code
for converting curves to meshes will likely be replaced, it's nicer to
see which parts actually remain used at this point.
|
|
|
|
|
|
Normals now includes many functions including normal splitting &
custom normal manipulation split this into it's own file
to centralize related functions.
|
|
|
|
|
|
- Multi-thread BKE_mesh_recalc_looptri.
- Add BKE_mesh_recalc_looptri_with_normals,
this skips having to calculate normals for ngons.
Exact performance depends on number of faces, size of ngons and
available CPU cores.
For high poly meshes the isolated improvement to BKE_mesh_recalc_looptri
in my tests was between 6.7x .. 25.0x, with the largest gains seen in
meshes containing ngons with many sides.
The overall speedup for high poly meshes containing quads and triangles
is only ~20% although ngon heavy meshes can be much faster.
|
|
|
|
Remove:
- BKE_mesh_loops_to_mface_corners
- BKE_mesh_tangent_loops_to_tessdata
|
|
This matches BMesh which also has tessellation in it's own file.
Using a separate file helps with organization when
extracting code into smaller functions.
|
|
- BKE_mesh_copy_parameters_for_eval to be used for evaluated meshes only
as it doesn't handle ID user-counts.
- BKE_mesh_copy_parameters is a general function for copying parameters
between meshes.
|
|
|
|
As in the old Blender Internal baking code, this still relies on there being a
good mapping to the original vertices.
|
|
|
|
|
|
|
|
Required changes to make it compile with clang tidy:
* Use c++ includes like (e.g. climits instead limits.h).
* Insert type casts when casting from void* to something else.
* Replace NULL with nullptr.
* Insert casts from int to enum.
* Replace designed initializers (not supported in C++ yet).
* Use blender::Vector instead of BLI_array_staticdeclare (does not compile with C++).
* Replace typedef statements.
Ref T83357.
|
|
|
|
When using Optimal Display, some edges are not flagged `ME_EDGEDRAW` |
`ME_EDGERENDER`.
When the modifier is applied through the UI in the modifier stack this is
not an issue because the `modifyMesh` callback is run with
`MOD_APPLY_TO_BASE_MESH` (this will effectively turn of Optimal
Display).
When converting to mesh though, this will just get an evaluated mesh
(where the edge flags are still the same as with the subdivision
modifier).
Now ensure every edge is flagged to draw after conversion.
Maniphest Tasks: T81997
Differential Revision: https://developer.blender.org/D9331
|
|
|
|
This modifier is the opposite of the recently added Mesh to Volume modifier.
It converts the "surface" of a volume into a mesh. The "surface" is defined
by a threshold value. All voxels with a density higher than the threshold
are considered to be inside the volume, while all others will be outside.
By default, the resolution of the generated mesh depends on the voxel
size of the volume grid. The resolution can be customized. It should be
noted that a lower resolution might not make this modifier faster. This
is because we have to downsample the openvdb grid, which isn't a cheap
operation.
Converting a mesh to a volume and then back to a mesh is possible,
but it does require two separate mesh objects for now.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9141
|
|
`BKE_mesh_calc_edges` was the main performance bottleneck in D9141.
While openvdb only needed ~115ms, calculating the edges afterwards
took ~960ms. Now with some parallelization this is reduced to ~210ms.
Parallelizing `BKE_mesh_calc_edges` is not entirely trivial, because it
has to perform deduplication and some other things that have to happen
in a certain order. Even though the multithreading improves performance
with more threads, there are diminishing returns when too many threads
are used in this function.
The speedup is mainly achieved by having multiple hash tables that are
filled in parallel. The distribution of the edges to hash tables is based on
a hash (that is different from the hash used in the actual hash tables).
I moved the function to C++, because that made it easier for me to
optimize it. Furthermore, I added `BLI_task.hh` which contains some
light tbb wrappers for parallelization.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D9151
|
|
It used to be an int mode.
|
|
This reverts commit 0796807720882731cdb70be144aa182e9b0b9ee5.
|
|
Those were only shallow wrappers around `BKE_id_copy`, barely used (even
fully unused in some cases), and we want to get rid of those ID-specific
helpers for the common ID management tasks. Also prevents weird custom
behaviors (like `BKE_object_copy`, who was the only basic ID copy
function to reset user count of the new copy to zero).
Part of 71219.
|
|
It used to be an `int mode`.
|
|
These were leftovers from the BGE removal.
Differential Revision: https://developer.blender.org/D8862
|
|
Just converts verts to points and vice versa.
Materials and Attribute layers are preserved (so for example if you set
custom radii on the pointcloud, convert to mesh, then convert back to
pointcloud, this will be preserved).
Also not add a Radius layer by default (it is still added and
filled when adding a pointcloud object from the menu), a global Radius
property that will be used if there is no radius attribute can be added
later. A Radius attribute can also be added in the pointcloud data
properties (and filled via python).
This will also add a new utility function that copies materials between
datablocks: BKE_id_materials_copy
ref T75717
Differential Revision: https://developer.blender.org/D7391
|
|
No functional changes
|
|
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
|
|
Also order return matrices last.
|
|
Clang Tidy reported a couple of false positives. I disabled
those `NOLINTNEXTLINE`.
Differential Revision: https://developer.blender.org/D8199
|
|
Use a median center of polygons as an initial value for volume center
calculation since the volume accumulation quickly generates very large
numbers that become inaccurate if the geometry is too far
from it's current center.
|
|
|
|
|
|
This resolves a performance regression in 2.8x where every edit-mode
update performed an edit-mesh to mesh conversion.
Now the conversion will be lazily initialized if/when it's required.
New BKE_mesh_wrapper_* functions abstract over mesh data access.
Currently only edit-mesh and regular meshes are supported.
In the future sub-surface meshes may be supported too.
|
|
Make it explicit this data mask is added to the default mask.
|
|
|
|
Instead of using anonymous booleans flags, also allows to keep the same
behavior in all cases, without needing special handling from calling
code for our beloved oddballs object proxies...
|
|
|