Age | Commit message (Collapse) | Author |
|
so value buttons are displayed when the link is not used.
|
|
|
|
|
|
|
|
This allows adding a "fake" sun beam effect, simulating crepuscular rays
from light being scattered in a medium like the atmosphere or deep water.
Such effects can be created also by renderers using volumetric lighting,
but the compositor feature is a lot cheaper and is independent from 3D
rendering. This makes it ideally suited for motion graphics.
The implementation uses am optimized accumulation method for gathering
color values along a line segment. The inner buffer loop uses fixed
offset increments to avoid unnecessary multiplications and avoids
variables by using compile-time specialization (see inline comments
for further details).
|
|
If the active image node contributes to the final material shader
(meaning it's either directly or indirectly connected to an Output Node)
the user will receive an alert about circular dependency.
Similar to what we do for Blender internal the baking will still happen,
but the user will receive the alert which should prevent the image
saving to happen if the result was not intentional.
Core function to check for node output written by Lukas Toenne.
Reviewers: lukastoenne, campbellbarton
Differential Revision: https://developer.blender.org/D673
|
|
This was already possible via the RGB nodes, but that seems weird.
|
|
Paolo Acampora.
Reviewers: brecht, kjym3, #freestyle
Reviewed By: brecht, kjym3
Differential Revision: https://developer.blender.org/D246
|
|
complete.
Fixes T37954.
Reviewed By: brecht, dingto
Differential Revision: https://developer.blender.org/D230
|
|
|
|
|
|
transformation.
This was suggested by Christopher Barrett (terrachild). Corner pin is a common feature in compositing.
The corners for the plane warping can be defined by using vector node inputs to allow using perspective plane transformations without having to go via the MovieClip editor tracking data.
Uses the same math as the PlaneTrack node, but without the link to MovieClip and Object.
{F78199}
The code for PlaneTrack operations has been restructured a bit to share it with the CornerPin node.
* PlaneDistortCommonOperation.h/.cpp: Shared generic code for warping images based on 4 plane corners and a perspective matrix generated from these. Contains operation base classes for both the WarpImage and Mask operations.
* PlaneTrackOperation.h/.cpp: Current plane track node operations, based on the common code above. These add pointers to MovieClip and Object which define the track data from wich to read the corners.
* PlaneCornerPinOperation.h/.cpp: New corner pin variant, using explicit input sockets for the plane corners.
One downside of the current compositor design is that there is no concept of invariables (constants) that don't vary over the image space. This has already been an issue for Blur nodes (size input is usually constant except when "variable size" is enabled) and a few others. For the corner pin node it is necessary that the corner input sockets are also invariant. They have to be evaluated for each tile now, otherwise the data is not available. This in turn makes it necessary to make the operation "complex" and request full input buffers, which adds unnecessary overhead.
|
|
compilation.
|
|
Implements a more flexible internal connect function for standard nodes
(compositor, shader, texture). Allow feasible datatype connections by
priority.
The priorities for common datatypes in compositor, shader and texture
nodes are encoded in a simple function. Certain impossible connections
(e.g. color -> cycles shader) are excluded by giving them -1 priority.
Priority overrides link status: If a higher priority input can be found,
this will be used regardless of link status. Link status only comes into
play for inputs with same priority.
Reviewers: brecht
CC: sebastian_k
Differential Revision: https://developer.blender.org/D356
|
|
|
|
don't get updated based on context.
As discussed in T38340 the solution is to use the current scene from
context whenever feasible.
Composite does not use node->id at all now, the scene which owns the
compositing node tree is retrieved from context instead.
Defocus node->id is made editable by the user. By default it is not set,
which also will make it use the contextual scene and camera info.
The node->id pointer in Defocus is **not** cleared in older blend files.
This is done for backward compatibility: the node will then behave as
before in untouched scenes.
File Output nodes also don't store scene in node->id. This is only needed
when creating a new node for initializing the file format.
Reviewers: brecht, jbakker, mdewanchand
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D290
|
|
|
|
|
|
|
|
* Henyey-Greenstein scattering closure implementation.
* Rename transparent to absorption node and isotropic to scatter node.
* Volume density is folded into the closure weights.
* OSL support for volume closures and nodes.
* This commit has no user visible changes, there is no volume render code yet.
This is work by "storm", Stuart Broadfoot, Thomas Dinges and myself.
|
|
moved the hide preview logic to a method on bNodeTreeType. This way the node.c keeps clean, but logic could still be shared.
Implementing this per node, can lead to future errors.
|
|
rename change/is_change/is_changed/modified -> changed
also use bools over int/short/char and once accidental float.
|
|
information such as light vector from specified Lamp.
For now this provides the following outputs:
- Color
- Light Vector
- Distance
- Shadow
- Visibility Factor
Note: Color output is multiplied by the lamp energy. Multiplication of
color*max(dot(light_vector,normal_vector),0)*shadow*visibility_factor
produces the exact same result as the Lambert shader.
Many thanks to Brecht for code review and discussion!
|
|
|
|
(simple 'label' identifier is already in use, need to avoid API breakage). This should simply return a string. The dynamic label can still be overridden by the user-defined node.label string.
|
|
callback function, let it write into a mutable string buffer. This will allow actual dynamic labels for nodes using the python
API.
|
|
for either mode are converted into equivalent settings of the other. This keeps the result of both modes roughly the same and
mimics the previous behavior when settings were shared by both modes (but not equivalent).
NOTE: Due to the use of additional sRGB conversion in the LGG mode the result is not entirely accurate, this should perhaps be fixed.
Settings for each mode are kept in their own color values nevertheless, this avoids potential problems with float precision.
|
|
shader node editor. The 'free' callback for node execution data was accessed from the node->typeinfo, but this pointer can
become invalid because the render database is not immediately freed after the job finishes. To avoid access to dangling node pointers, store the function callback in the exec data itself. The node
pointer must not be accessed in the free function (wasn't used before either), these functions are purely for the execution data.
|
|
useless wrappers around socket draw functions. Only use-case is the File Output node, which draws socket format type instead of
an input value. This is now a special case in the standard socket type drawing, but should eventually become a socket type of its own for the File Output node.
|
|
This aims to establish a common pattern for the various confusing draw callback function pointers in bNodeType:
draw_<purpose>_<nodetype>[_ex]
Currently there are 4 different types of draw callbacks:
* draw_nodetype, draw_nodetype_prepare: Main draw functions, allows specialized node drawing for things like frames and reroute nodes. Not exposed in the API.
* draw_buttons, draw_buttons_ex: Optional non-socket buttons, most commonly used callback. Extended version used in sidebar for verbose buttons that don't fit into a node.
* draw_backdrop: Draw elements in the backdrop (compositor only). Not exposed in the API.
* draw_input, draw_output: Specialized socket drawing for some nodes, only for OutputFile node. Should not be used any further and be removed at some point. Not exposed in the API.
|
|
A new hair bsdf node, with two closure options, is added. These closures allow the generation of the reflective and transmission components of hair. The node allows control of the highlight colour, roughness and angular shift.
Llimitations include:
-No glint or fresnel adjustments.
-The 'offset' is un-used when triangle primitives are used.
|
|
CTX_DATA_BEGIN/END)
|
|
|
|
This commit includes all the changes made for plane tracker
in tomato branch.
Movie clip editor changes:
- Artist might create a plane track out of multiple point
tracks which belongs to the same track (minimum amount of
point tracks is 4, maximum is not actually limited).
When new plane track is added, it's getting "tracked"
across all point tracks, which makes it stick to the same
plane point tracks belong to.
- After plane track was added, it need to be manually adjusted
in a way it covers feature one might to mask/replace.
General transform tools (G, R, S) or sliding corners with
a mouse could be sued for this. Plane corner which
corresponds to left bottom image corner has got X/Y axis
on it (red is for X axis, green for Y).
- Re-adjusting plane corners makes plane to be "re-tracked"
for the frames sequence between current frame and next
and previous keyframes.
- Kayframes might be removed from the plane, using Shit-X
(Marker Delete) operator. However, currently manual
re-adjustment or "re-track" trigger is needed.
Compositor changes:
- Added new node called Plane Track Deform.
- User selects which plane track to use (for this he need
to select movie clip datablock, object and track names).
- Node gets an image input, which need to be warped into
the plane.
- Node outputs:
* Input image warped into the plane.
* Plane, rasterized to a mask.
Masking changes:
- Mask points might be parented to a plane track, which
makes this point deforming in a way as if it belongs
to the tracked plane.
Some video tutorials are available:
- Coder video: http://www.youtube.com/watch?v=vISEwqNHqe4
- Artist video: https://vimeo.com/71727578
This is mine and Keir's holiday code project :)
|
|
* Render Passes are now available for Subsurface Scattering (Direct, Indirect and Color pass).
This is part of my GSoC project, SVN merge of r58587, r58828 and r58835.
|
|
* Added 2 new nodes to combine and separate HSV colors.
Screenshot:
http://www.pasteall.org/pic/show.php?id=54828
|
|
* First step towards a new vector transform node, to convert Points/Vectors between World/Object/Camera space.
This only contains the Blender UI, RNA... code, no Cycles integration yet.
|
|
* First step towards a Blackbody to RGB converter. You can specify a color in Kelvin inside the node.
* Only implemented for OSL atm, SVM will follow.
|
|
|
|
|
|
not getting correctly initialized node->id pointer to the Viewer image (thanks to Sergey for figuring that out). The original
proposal was to add another special init hack for the viewer node->id, but rather would do it right and so moved all the special init hacks for constant ID backpointers (Scene for RenderLayer, Composite,
Defocus, FileOutput and MovieClip for MovieClip, MovieDistortion and Stabilization nodes). These are now part of the local init callbacks functions of the appropriate nodes, using the new initfunc_api
callback which takes a Context pointer, so they have access to Scene.
|
|
* Added a node to convert wavelength (in nanometer, from 380nm to 780nm) to RGB values. This can be useful to match real world colors easier.
Example render:
http://www.pasteall.org/pic/show.php?id=53202
ToDo:
* Move some functions into an util file, maybe a common util_color.h or so.
* Test GPU, unfortunately sm_21 doesn't work for me yet.
|
|
* Added a toon bsdf node to Cycles. This was already available as OSL only closure, but is now available inside the SVM backed as well, for CPU and GPU rendering.
* There are 2 variations available, diffuse and glossy toon, selectable via a menu inside the node.
Documentation:
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/Shaders#Toon
Example render & blend file:
http://www.pasteall.org/pic/show.php?id=51970
http://www.pasteall.org/blend/21579
|
|
* Use unified node sizes, as already was done with compositor nodes. Only Mapping node uses a custom size. This way we don't have too small nodes on creation anymore.
* Don't show Script Category for Blender Internal nodes.
|
|
* Added a wireframe node (Input category) to get access to Mesh wireframe data.
The thickness can be controlled via a "Size" parameter, and is available in world units (default) and screen pixel size.
* Only the triangulated mesh is available now, quads is for later.
Documentation:
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/More#Wireframe
Render and Example file:
http://www.pasteall.org/pic/show.php?id=51731
http://www.pasteall.org/blend/21510
|
|
parameter, instead of always using the sock->name string. This can be useful for drawing the socket values separate from the label, e.g. in the node view template.
|
|
label for connected sockets, leave this check up to the socket draw function itself. This allows future socket types to draw buttons or other info in all cases and handle connected/unconnected state more flexibly.
The drawinputfunc/drawoutputfunc callbacks in bNodeType are pretty much empty wrappers now and should be removed at some point. This per-node differentiation should rather be implemented as a specialized socket type if necessary. The only use case for this feature that remains is the file output node in compositor, which displays shortened file format info for each socket.
|
|
was renamed fairly recently but other similar iterators not negated
like this, would prefer to keep it as it was
|
|
Issue was caused by ntreeUpdateTree calling for a ntree
which is not in G.main.
This lead to issues in ntreeVerifyNodes (which is called
from ntreeUpdateTree).
Made is so ntreeUpdateTree now accepts main as an argument.
Will work for the release, later we could either solve the
TODO mentioned in ntreeUpdateTree which will eliminate need
in main there or make it so context's main is used from all
over where ntreeUpdateTree is called (currently there're
still some usages of G.main).
|
|
The design changes coming with pynodes for the node editor allow editing multiple node groups or pinning. This is great for working on different node groups without switching between them all the time, but it causes a problem for viewer nodes: these nodes all write to the same Image data by design, causing access conflicts and in some cases memory corruption. This was not a problem before pynodes because the editor would only allow 1 edited node group at any time. With the new flexibility of node editors this restriction is gone.
In order to avoid concurrent write access to the viewer image buffer and resolve the ambiguity this patch adds an "active viewer key" to the scene->nodetree (added in bNodeTree instead of Scene due to otherwise circular DNA includes). This key identifies a specific node tree/group instance, which enables the compositor to selectively enable only 1 viewer node.
The active viewer key is switched when opening/closing node groups (push/pop on the snode->treepath stack) or when selecting a viewer node. This way only the "last edited" viewer will be active.
Eventually it would be nicer if each viewer had its own buffer per node space so one could actually compare viewers without switching. But that is a major redesign of viewer nodes and images, not a quick fix for bcon4 ...
|