Age | Commit message (Collapse) | Author |
|
|
|
Part of T91671.
Not much else to say, this is mainly a massive deletion of code.
Note that a few cleanups possible after this proxy removal were kept out
of this commit to try to reduce a bit its size.
Reviewed By: sergey, brecht
Maniphest Tasks: T91671
Differential Revision: https://developer.blender.org/D13995
|
|
The evaluated mesh is a result of evaluated modifiers, and referencing
other evaluated IDs such as materials.
It can not be stored in the EditMesh structure which is intended to be
re-used by many areas. Such sharing was causing ownership errors causing
bugs like
T93855: Cycles crash with edit mode and simultaneous viewport and final render
The proposed solution is to store the evaluated edit mesh and its cage in
the object's runtime field. The motivation goes as following:
- It allows to avoid ownership problems like the ones in the linked report.
- Object level is chosen over mesh level is because the evaluated mesh
is affected by modifiers, which are on the object level.
This patch allows to have modifier stack of an object which shares mesh with
an object which is in edit mode to be properly taken into account (before
the change the modifier stack from the active object will be used for all
objects which share the mesh).
There is a change in the way how copy-on-write is handled in the edit mode to
allow proper state update when changing active scene (or having two windows
with different scenes). Previously, the copt-on-write would have been ignored
by skipping tagging CoW component. Now it is ignored from within the CoW
operation callback. This allows to update edit pointers for objects which are
not from the current depsgraph and where the edit_mesh was never assigned in
the case when the depsgraph was evaluated prior the active depsgraph.
There is no user level changes changes expected with the CoW handling changes:
should not affect on neither performance, nor memory consumption.
Tested scenarios:
- Various modifiers configurations of objects sharing mesh and be part of the
same scene.
- Steps from the reports: T93855, T82952, T77359
This also fixes T76609, T72733 and perhaps other reports.
Differential Revision: https://developer.blender.org/D13824
|
|
MSVC used to warn about const mismatch for arguments passed by value.
Remove these as newer versions of MSVC no longer show this warning.
|
|
|
|
This evaluator is used in order to evaluate subdivision at render time, allowing for
faster renders of meshes with a subdivision surface modifier placed at the last
position in the modifier list.
When evaluating the subsurf modifier, we detect whether we can delegate evaluation
to the draw code. If so, the subdivision is first evaluated on the GPU using our own
custom evaluator (only the coarse data needs to be initially sent to the GPU), then,
buffers for the final `MeshBufferCache` are filled on the GPU using a set of
compute shaders. However, some buffers are still filled on the CPU side, if doing so
on the GPU is impractical (e.g. the line adjacency buffer used for x-ray, whose
logic is hardly GPU compatible).
This is done at the mesh buffer extraction level so that the result can be readily used
in the various OpenGL engines, without having to write custom geometry or tesselation
shaders.
We use our own subdivision evaluation shaders, instead of OpenSubDiv's vanilla one, in
order to control the data layout, and interpolation. For example, we store vertex colors
as compressed 16-bit integers, while OpenSubDiv's default evaluator only work for float
types.
In order to still access the modified geometry on the CPU side, for use in modifiers
or transform operators, a dedicated wrapper type is added `MESH_WRAPPER_TYPE_SUBD`.
Subdivision will be lazily evaluated via `BKE_object_get_evaluated_mesh` which will
create such a wrapper if possible. If the final subdivision surface is not needed on
the CPU side, `BKE_object_get_evaluated_mesh_no_subsurf` should be used.
Enabling or disabling GPU subdivision can be done through the user preferences (under
Viewport -> Subdivision).
See patch description for benchmarks.
Reviewed By: campbellbarton, jbakker, fclem, brecht, #eevee_viewport
Differential Revision: https://developer.blender.org/D12406
|
|
Added in 161ab6109e265ea906e0308ab404f95282534770
|
|
Most of the fields in Mesh had no comments, or outdated misleading
comments. For example, "BMESH ONLY" referred to the BMesh project,
not the data structure. Given how much these structs are used, it should
save a lot of time to have proper comments.
I also rearranged the fields in mesh to have a more logical order. Now
the most important fields come first. In the process I was able to
remove 19 bytes of unnecessary padding (31->12). I just had to
change a `short` flag to `char`.
Differential Revision: https://developer.blender.org/D13454
|
|
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
- Minor improvements to doc-strings.
Ref T92709
|
|
There are two functions that recalculate the boundbox of an object:
- One that considers the evaluated geometry
- Another that only considers the object's `data`.
Most of the time, the bound box is calculated on the final object
(with modifiers), so it doesn't seem right to just rely on `ob->data`
to recalculate the `ob->runtime.bb`.
Be sure to calculate the BoundBox based on the final geometry and
only use `ob->data` as a fallback
Differential Revision: https://developer.blender.org/D12282
|
|
This is useful to allow the use of features made in C++.
Differential Revision: https://developer.blender.org/D13115
|
|
This patch allows dropping material assets from material slot under the mouse
cursor. Before this change the material slot had to be hand-picked from the
properties panel.
For consistency it is chosen to do this in any shading mode as the tooltip shows
what is exactly going to happen during release.
The feature also works for other object types than Meshes as it uses the drawn surface on the
GPU to detect the material slots. Performance of this patch has been tested with AMD GCN3.0
cards and are very responsive.
Reviewed By: fclem, Severin
Differential Revision: https://developer.blender.org/D12190
|
|
Previously, the Point Instance node in geometry nodes could only instance
existing objects or collections. The reason was that large parts of Blender
worked under the assumption that objects are the main unit of instancing.
Now we also want to instance geometry within an object, so a slightly larger
refactor was necessary.
This should not affect files that do not use the new kind of instances.
The main change is a redefinition of what "instanced data" is. Now, an
instances is a cow-object + object-data (the geometry). This can be nicely
seen in `struct DupliObject`. This allows the same object to generate
multiple geometries of different types which can be instanced individually.
A nice side effect of this refactor is that having multiple geometry components
is not a special case in the depsgraph object iterator anymore, because those
components are integrated with the `DupliObject` system.
Unfortunately, different systems that work with instances in Blender (e.g.
render engines and exporters) often work under the assumption that objects are
the main unit of instancing. So those have to be updated as well to be able to
handle the new instances. This patch updates Cycles, EEVEE and other viewport
engines. Exporters have not been updated yet. Some minimal (not master-ready)
changes to update the obj and alembic exporters can be found in P2336 and P2335.
Different file formats may want to handle these new instances in different ways.
For users, the only thing that changed is that the Point Instance node now
has a geometry mode.
This also fixes T88454.
Differential Revision: https://developer.blender.org/D11841
|
|
This patch exposes the Cycles Alembic Procedural through the MeshSequenceCache
modifier in order to use and test it from Blender.
To enable it, one has to switch the render feature set to experimental and
activate the Procedural in the modifier. An Alembic Procedural is then
created for each CacheFile from Blender set to use the Procedural, and each
Blender object having a MeshSequenceCache modifier is added to list of objects
of the right procedural.
The procedural's parameters derive from the CacheFile's properties which are
already exposed in the UI through the modifier, although more Cycles specific
options might be added in the future.
As there is currently no cache controls and since we load all the data at the
beginning of the render session, the procedural is only available during
viewport renders at the moment. When an Alembic procedural is rendered, data
from the archive are not read on the Blender side.
If a Cycles render is not active and the CacheFile is set to use the Cycles Procedural,
bounding boxes are used to display the objects in the scene as a signal that the
objects are not processed by Blender anymore. This is standard in other DCCs.
However this does not reduce the memory usage from Blender as the Alembic data
was already loaded either during an import or during a .blend file read.
This is mostly a hack to test the Cycles Alembic procedural until we have a
better Blender side mechanism for letting renderers load their own geometry,
which will be based on import and export settings on Collections (T68933).
Ref T79174, D3089
Reviewed By: brecht, sybren
Maniphest Tasks: T79174
Differential Revision: https://developer.blender.org/D10197
|
|
This reverts commits
bfa3dc91b75407b063f2ac991b176d98c050f92d,
52b94049f2a71a74f52247f83657cf3a5c8712b4,
ae379714e4f1eca74f5f77532a6e959f29445236,
a770faa811ee62837eb540b0bd83ca0770f16663,
4ed029fc02b022cb5ff28ed3ce70992c450d2be5,
101a493ab556c6597ac91fba204059be67b35990 and
62a2faa7ef39130446716d7a06215cd1df1eb2ac.
And fixes T89955.
Changing the dependency graph is a can of worms and the result is
a kind of unpredictable.
A different solution will be planned.
|
|
During a mesh transformation in edit mode (Move, Rotate...), only part of
the batch cache needs to be updated.
This commit allows only update only the drawn batches seen in
`BKE_object_data_eval_batch_cache_deform_tag` if the new
`ID_RECALC_GEOMETRY_DEFORM` flag is used.
This new flag is used in the transforms operation for edit-mesh and
results in 1.6x overall speedup in heavy subdiv cube.
Differential Revision: https://developer.blender.org/D11599
|
|
Many ui features for geometry nodes need access to information generated
during evaluation:
* Node warnings.
* Attribute search.
* Viewer node.
* Socket inspection (not in master yet).
The way we logged the required information before had some disadvantages:
* Viewer node used a completely separate system from node warnings and
attribute search.
* Most of the context of logged information is lost when e.g. the same node
group is used multiple times.
* A global lock was needed every time something is logged.
This new implementation solves these problems:
* All four mentioned ui features use the same underlying logging system.
* All context information for logged values is kept intact.
* Every thread has its own local logger. The logged informatiton is combined
in the end.
Differential Revision: https://developer.blender.org/D11785
|
|
Generally the evaluated mesh should not be changed, since that is the
job of the modifier stack. Current code is far from const correct in
that regard. This commit uses a const variable for the reult of
`BKE_object_get_evaluated_mesh` in some cases. The most common
remaining case is retrieving a BVH tree from the mesh.
|
|
|
|
|
|
Create a more specialized function `BKE_object_data_batch_cache_dirty_tag`
|
|
|
|
Rename BKE_object_runtime_free -> BKE_object_runtime_free_data,
since the runtime pointer is part of the object, only the data is freed.
Leave the data cleared to avoid accidental use,
this is in keeping with other `*_free_data()` functions.
|
|
While fa7ddd0f43ea15dd19d81e7808de2bfe8cfc89ee fixed the reported issue,
the possibility of reusing runtime data during curve-to-mesh conversion
remained. Instead of treating the bounding-box as a special case,
clear all run-time data for temporary objects.
Ref D11026
Reviewed By: sergey
|
|
This introduces a context path to the spreadsheet editor, which contains
information about what data is shown in the spreadsheet. The context
path (breadcrumbs) can reference a specific node in a node group
hierarchy. During object evaluation, the geometry nodes modifier checks
what data is currently requested by visible spreadsheets and stores
the corresponding geometry sets separately for later access.
The context path can be updated by the user explicitely, by clicking
on the new icon in the header of nodes. Under some circumstances,
the context path is updated automatically based on Blender's context.
This patch also consolidates the "Node" and "Final" object evaluation
mode to just "Evaluated". Based on the current context path, either
the final geometry set of an object will be displayed, or the data at
a specific node.
The new preview icon in geometry nodes now behaves more like
a toggle. It can be clicked again to clear the context path in an
open spreadsheet editor.
Previously, only an object could be pinned in the spreadsheet editor.
Now it is possible to pin the entire context path. That allows two
different spreadsheets to display geometry data from two different
nodes.
The breadcrumbs in the spreadsheet header can be collapsed by
clicking on the arrow icons. It's not ideal but works well for now.
This might be changed again, if we get a data set region on the left.
Differential Revision: https://developer.blender.org/D10931
|
|
Previously, the spreadsheet editor could only show data of the original
and of the final evaluated object. Now it is possible to show the data
at some intermediate stages too.
For that the mode has to be set to "Node" in the spreadsheet editor.
Furthermore, the preview of a specific node has to be activated by
clicking the new icon in the header of geometry nodes.
The exact ui of this feature might be refined in upcoming commits.
It is already very useful for debugging node groups in it's current
state though.
Differential Revision: https://developer.blender.org/D10875
|
|
Fix the data management bug where evaluation of lattice objects would
write back to the CoW copy of the Lattice ID, even when that copy was
shared between objects.
Each lattice object evaluation now stores its own evaluated data copy
via `BKE_object_eval_assign_data()`.
Reviewed By: sergey
Maniphest Tasks: T78650
Differential Revision: https://developer.blender.org/D10790
|
|
This patch adds a to_curve method to the Object ID. This method is
analogous to the to_mesh method. The method can operate on curve and
text objects. For text objects, the text is converted into a 3D Curve ID
and that curve is returned. For curve objects, if apply_modifiers is
true, the spline deform modifiers will be applied and a Curve ID with
the result will be returned, otherwise a copy of the curve will be
returned.
The goal of this addition is to allow the developer to access the splines
of text objects and to get the result of modifier applications which was
otherwise not possible.
Reviewed By: Brecht
Differential Revision: https://developer.blender.org/D10354
|
|
Things like pointers to particle systems, or softbody data being stored
outside of its modifier, make it impossible for internal modifier copy
data code to be self-contained currently. It requires extra processing.
In existing code this was handled in several different places, in
several ways, and alltogether fairly inconsistently. Some cases were
even not properly handled, causing e.g. crashes as in T82945.
This commit addresses those issues by:
* Adding comments about the hackish/unsafe parts `psys` implies when
copying some modifier data (since we need to ensure particle system
copying and remapping of those pointers separately).
* Adding as-best-as-possible handling of those cases to
`BKE_object_copy_modifier` (note that it remains fragile, but is
expected to behave 'good enough' in any practical usecase).
* Remove special handling for specific editor code
(`copy_or_reuse_particle_system`). This should never have been
accepted in ED code area, and is now handled by
`BKE_object_copy_modifier`.
* Factorize copying of the whole modifier stack into new
`BKE_object_modifier_stack_copy`, now used by both `object_copy_data`
and `BKE_object_link_modifiers`.
Note that this implies that `BKE_object_copy_modifier` and
`BKE_object_copy_gpencil_modifier` are now to be used exclusively to
copy single modifiers. Full modifier stack copy should always use
`BKE_object_modifier_stack_copy` instead.
Fix T82945: Crash when dragging modifiers in Outliner.
Maniphest Tasks: T82945
Differential Revision: https://developer.blender.org/D10148
|
|
Root of the issue is that `BKE_object_eval_boundbox` (that ports back
evaluated bbox to orig object during active depsgraph evaluation) is
only called when object's geometry actually is evaluated.
However, with new undo, often Object itself can be changed by undo,
without requiring its geometry to be re-evaluated, which was leading to
the evaluated bbox not being copied back into orig object anymore.
Fixing that by moving bbox copying-to-orig code into
`BKE_object_sync_to_original` instead, which is always executed when
object is evaluated (as hinted by the comment above
`BKE_object_eval_boundbox` actually).
Also allows to cleanup code for armature eval, apparently.
Maniphest Tasks: T83422
Differential Revision: https://developer.blender.org/D9789
|
|
These two operators (one for grease pencil, one for other objects)
copy a single modifier from the active object to all selected objects.
The operators are exposed in the dropdown menus in modifier headers.
Note that It's currently possible to drag and drop modifiers between
objects in the outliner, but that only works for dragging to one object
at a time. Modifiers can also be copied with the "Make Links" operator,
but that copies *all* modifiers rather than just one. The placement
and scope of these new operators allow for more useful poll messages
and error messages as well.
Every object type that supports modifiers is supported. Although hook
and collision modifiers aren't supported because of an unexplained
comment in `BKE_object_copy_modifier`, other than that, every modifier
type is supported, including particle systems, nodes modifiers, etc.
The new modifiers are set active, which required two small tweaks to
`object.c` and `particle.c`.
Reviewed By: Hans Goudey (with additional edits)
Differential Revision: https://developer.blender.org/D9537
|
|
This commit adds functions to set and get the object's active
modifier, which is stored as a flag in the ModifierData struct,
similar to constraints. This will be used to set the context in
the node editor. There are no visible changes in this commit.
Similar to how the node editor context works for materials, this commit
makes the node group displayed in the node editor depend on the active
object and its active modifier. To keep the node group from changing,
just pin the node group in the header.
* Shortcuts performed while there is an active modifier will affect
only that modifier (the exception is the A to expand the modifiers).
* Clicking anywhere on the empty space in a modifier's panel will make it active.
These changes require some refactoring of object modifier code. First
is splitting up the modifier property invoke callback, which now needs
to be able to get the active modifier separately from the hovered
modifier for the different operators.
Second is a change to removing modifiers, where there is now a separate
function to remove a modifier from an object's list, in order to handle
changing the active.
Finally, the panel handler needs a small tweak so that this "click in panel"
event can be handled afterwards.
|
|
|
|
Ref T76372.
|
|
Add a comment to the declaration of the `BKE_object_where_is_calc...()`
functions to explain where the result of the calculation is stored.
No functional changes.
|
|
Those were only shallow wrappers around `BKE_id_copy`, barely used (even
fully unused in some cases), and we want to get rid of those ID-specific
helpers for the common ID management tasks. Also prevents weird custom
behaviors (like `BKE_object_copy`, who was the only basic ID copy
function to reset user count of the new copy to zero).
Part of 71219.
|
|
No functional changes. Split the grease pencil and object copy logic
into separate functions. This makes the code cleaner and prepares
utility functions for outliner modiifier drag and drop.
Differential Revision: https://developer.blender.org/D8642
|
|
Also correct wrapped lines of example code in threads.cc.
|
|
|
|
No functional changes
|
|
Move functionality to get the object type from an ID
into it's own function.
|
|
|
|
Allows to keep track of modifiers, which is required, for example,
for runtime data preservation in depsgraph.
|
|
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
|
|
Also order return matrices last.
|
|
Note that this behavior is enforced on user level for now, but on code
side it is controlled with a flag, which should make it easy to refine
that behavior if needed.
Only exception is when we duplicate a linked ID directly (then we assume
user wants a local deep-copy of that linked data, and we always also
duplicate linked sub-data-blocks).
Note that this commit also slightly refactor the handling of actions of
animdata, by simplifying `BKE_animdata_copy_id_action()` and adding an
explicit new `BKE_animdata_duplicate_id_action()` to be used during ID
duplication (deep copy).
This also allows us to get rid of the special case for liboverrides.
|
|
Main change from user side, besides that all pointers should now be
properly remapped to new IDs, is that linked objects are no longer
preserved when doing a full copy of scenes.
Will open a task to check whether we actually still want that behavior
(and re-code it in a more correct way then).
This is the main part of work done here, it aims at uniformizing and
sanitizing that 'deep copy' process for supported IDs (currently scenes,
collections and objects).
Note that there will be more follow up commits after that one, but this
should be the most risky and changing one.
|
|
Would break on some systems/compilers...
|
|
Using enum type itself in implementations, and uint in headers (as using
enums types in headers is a pain when enum are not defined and used in a
single same header file...).
|
|
Surrounding includes with an 'extern "C"' block is not necessary anymore.
Also that made it harder to add any C++ code to some headers, or include headers
that have "optional" C++ code like `MEM_guardedalloc.h`.
I tested compilation on linux and windows (and got help from @LazyDodo).
If this still breaks compilation due to some linker error, the header containing
the symbol in question is probably missing an 'extern "C"' block.
Differential Revision: https://developer.blender.org/D7653
|