| Age | Commit message (Collapse) | Author |
|---|
|
Viewport: Disable Clipping For EEVEE and External Renderers
Currently it is possible that, when using viewport clipping, the display and tools communicate
different information to the user then the renderer does. The reason is
that the renderer does not support viewport clipping. Both EEVEE and
Cycles do not support it.
This patch will disable the clipping in all the tools and drawing code
when the viewport drawing mode is `Material Preview` or `Rendered`.
This patch introduces a `RV3D_CLIPPING_ENABLED` util that checks if
clipping is enabled for the given `rv3d` and `v3d`. Also in places where
it was needed we added the `ViewContext` as a carrier for the `View3D`
and `RegionView3D`.
There are a few areas in the tooling (select, projection painting) that
still needs to be tackled after this patch.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6047
|
|
Issue likely caused by 8b31f6fb2169.
With this, initializing the toolsystem (e.g. for a new workspace-scene
combination) would skip the entire create->initialize routine for
image/texture painting settings. Reason being that these are not
allocated, unlike other paint settings. So while correctly skipping the
create part, it also skipped the initialization, which was still needed.
This does further changes in related code to avoid NULL pointer
accesses.
|
|
This introduces object mode tagging for data which hasn't yet been
written back to the ID data.
Now when selecting other sculpt objects, the original objects data is
flushed back to the ID before writing a memfile undo step.
|
|
|
|
|
|
This commit makes the pose brush easier to control. It also includes a refactor of the pose brush init code.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D5761
|
|
The sculpt mode transform tool applies the sculpt pivot transformation to all vertices, taking XYZ symmetry into account.
This commit also includes an operator to set the pivot point initial position.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5717
|
|
Grab active vertex snaps the maximum strength of the grab brush to the highlighted active vertex, making it easier to manipulate low poly models or meshes with subdivision surfaces.
Dynamic Mesh Preview generates a list of connected vertices from the active vertex and draws them from the cursor code. This helps to visualize the real geometry the user is manipulating from sculpt mode when there are active modifiers.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5646
|
|
This operator is a combined version of mask expand and mask by normal from the sculpt branch. It can be used to quickly isolate parts of a model based on topology or curvature.
- Shift + A starts the operator in topology mode from the active vertex
- Shift + Alt + A starts the operator in curvature mode from the active vertex
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5657
|
|
The mesh filter tool applies a deformation to all vertices in the mesh at the same time. It includes multiple deformation modes and the option to lock the deformation axis.
This commit also includes the FilterCache, which is needed in some new operators and tools.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5513
|
|
This commit includes the new brush cursor, active vertex updates and the normal radius brush property for all sculpt brushes.
-The new brush cursor previews the real stroke radius over the mesh and the sampled sculpt normal.
-The active vertex is used in sculpt tools and brushes as a starting point for an operation, similar to a preselection. It is also mirrored following the enabled symmetry options to preview the stroke symmetry.
-The normal radius brush property limits the radius that is going to be used to sample the sculpt normal and area center. It controls how closely the cursor follows the surface and it improves the behavior of most brushes, making them suitable for hard surface sculpting.
Reviewed By: campbellbarton, brecht
Differential Revision: https://developer.blender.org/D3594
|
|
|
|
These functions make possible porting the tools from the sculpt branch, making them compatible with PBVH_FACES and PBVH_BMESH without duplicating the code. They can also help to simplify some existing code.
These functions should not be used when working with PBVH_GRIDS data in SculptSession. PBVH_GRIDS needs to be removed from the sculpt code and converted to PBVH_FACES to be compatible with this API.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5352
|
|
This should have been removed in 2.80 as the functionality was removed.
This feature now does not do anything and can be removed.
Differential Revision: https://developer.blender.org/D5411
|
|
This restores the code that updates the sculpt session and PBVH from dependency
graph evaluation.
|
|
Centralize logic for when to use the PBVH for drawing, fix missing tests in
mask drawing, fix missing tests for multiple windows, only do more expensive
update for all viewports at end of the stroke.
|
|
In 2.7x UV sculpt was a kind of sub-mode
(a toggle with it's own key-map & drawing code).
Move this to an operator that uses the tool-system,
this simplifies internal logic, especially brush selection
which now matches sculpt and other paint modes.
- Remove toggle used to enable uv sculpt.
- Expose the brush, which was already used but there was no way to
select different brushes.
- Make UV sculpt use paint paint tool slots
(using brushes how all other paint mode currently do).
- Move UV Sculpt keymap to the tools keymap.
- Remove Q to toggle UV sculpt mode,
S/P/G keys to switch tools.
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
|
|
In fact, any modifier on top of multires would lead to crash.
Was missing pointer update.
Basically, bring the control flow closer to 2.7.
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Done using:
source/tools/utils_maintenance/c_sort_blocks.py
|
|
Without this clang-format may wrap them onto a single line.
|
|
|
|
|
|
- Rename ePaint* -> PAINT_MODE_*.
- Use PAINT_OVERLAY_ prefix for eOverlayControlFlags.
|
|
|
|
Matches ePaintTexture2D, less verbose.
|
|
Replace grease pencil specific brush select operator.
|
|
|
|
- Vertex & weight paint now use the 'blend' setting.
- Weight paint now has it's own tool setting,
since weight paint doesn't deal with color - we'll likely
support different tools eventually.
|
|
Previously the brush names were used which had the limit that:
- Brush names that were deleted wouldn't show up in the toolbar.
- Naming collisions between user defined brushes and existing tools
broke tool selection.
Now brushes are created as needed when tools are selected.
Note, vertex/weight paint combine tool and blend modes,
this should be split out into a separate enum.
|
|
It was getting too impractical to call BKE_paint_brush_tool_info
which needed to lookup the scene pointers.
Now each store tool offset and brush mode in 'Paint.runtime'
|
|
Each mode had its own logic for initializing paint structs,
move to a single function.
Also remove "BKE_brush_get_gpencil_paint", entering grease pencil
mode is responsible for ensuring the data is created.
|
|
Needed for entering paint modes on new scenes.
|
|
|
|
The toolbar now shows brush types, the brush selector now
only shows brushes matching the current tool type.
Details:
- Add's Paint.tool_slots (used by the toolbar).
- Removed custom grease pencil brush tool code.
- Bumped subversion.
See T57526 for details.
|
|
|
|
Allows to go to sculpt mode, do brush strokes, get out of sculpt mode
and have deformation preserved.
The issues currently is that the current implementation of CCG
storage is created from the limit surface, without displacement
taken into account. It is trivial to get displaced coordinates,
but it is more tricky to get displaced normals. This is something
to be solved next.
Another limitation is that this only works for sculpting at a maximal
multires level. There is code to be done to support propagation
of displacement onto a higher levels.
|
|
Attempts to substitude CCGDM with an OpenSubdiv based structure
which has less abstraction levels. The missing part in this
substitude is a face pointers which old CCGDM/multires code was
using to stitch faces (averaging boundaries).
Another curial bit missing: "reshaping" of multires CD_MDISPS
to the state of new PBVH grids.
The new code is only available when OpenSubdiv modifier is
enabled (WITH_OPENSUBDIV_MODIFIER=ON) and with debug value of
128. This is so this WIP code is not interfering with current
production machines in the studio.
Reviewers: brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D3685
|
|
This commit merge the full development done in greasepencil-object branch and include mainly the following features.
- New grease pencil object.
- New drawing engine.
- New grease pencil modes Draw/Sculpt/Edit and Weight Paint.
- New brushes for grease pencil.
- New modifiers for grease pencil.
- New shaders FX.
- New material system (replace old palettes and colors).
- Split of annotations (old grease pencil) and new grease pencil object.
- UI adapted to blender 2.8.
You can get more info here:
https://code.blender.org/2017/12/drawing-2d-animation-in-blender-2-8/
https://code.blender.org/2018/07/grease-pencil-status-update/
This is the result of nearly two years of development and I want thanks firstly the other members of the grease pencil team: Daniel M. Lara, Matias Mendiola and Joshua Leung for their support, ideas and to keep working in the project all the time, without them this project had been impossible.
Also, I want thanks other Blender developers for their help, advices and to be there always to help me, and specially to Clément Foucault, Dalai Felinto, Pablo Vázquez and Campbell Barton.
|
|
|
|
|
|
Conflicts:
intern/cycles/blender/blender_object.cpp
source/blender/alembic/intern/abc_exporter.cc
source/blender/alembic/intern/abc_mball.cc
source/blender/alembic/intern/abc_mball.h
source/blender/blenkernel/BKE_anim.h
source/blender/blenkernel/BKE_displist.h
source/blender/blenkernel/BKE_dynamicpaint.h
source/blender/blenkernel/BKE_group.h
source/blender/blenkernel/BKE_mball.h
source/blender/blenkernel/BKE_mball_tessellate.h
source/blender/blenkernel/BKE_object.h
source/blender/blenkernel/BKE_scene.h
source/blender/blenkernel/intern/anim.c
source/blender/blenkernel/intern/depsgraph.c
source/blender/blenkernel/intern/displist.c
source/blender/blenkernel/intern/dynamicpaint.c
source/blender/blenkernel/intern/group.c
source/blender/blenkernel/intern/mball.c
source/blender/blenkernel/intern/mball_tessellate.c
source/blender/blenkernel/intern/mesh_convert.c
source/blender/blenkernel/intern/object.c
source/blender/blenkernel/intern/object_dupli.c
source/blender/blenkernel/intern/object_update.c
source/blender/blenkernel/intern/pointcache.c
source/blender/blenkernel/intern/scene.c
source/blender/blenkernel/intern/smoke.c
source/blender/depsgraph/intern/builder/deg_builder_nodes.cc
source/blender/depsgraph/intern/builder/deg_builder_relations.cc
source/blender/editors/include/ED_object.h
source/blender/editors/object/object_add.c
source/blender/editors/object/object_edit.c
source/blender/editors/object/object_modifier.c
source/blender/editors/physics/dynamicpaint_ops.c
source/blender/editors/sculpt_paint/paint_vertex.c
source/blender/editors/sculpt_paint/sculpt_uv.c
source/blender/editors/space_view3d/drawobject.c
source/blender/editors/space_view3d/view3d_draw.c
source/blender/editors/transform/transform_conversions.c
source/blender/editors/transform/transform_snap_object.c
source/blender/editors/util/ed_util.c
source/blender/gpu/intern/gpu_material.c
source/blender/makesrna/intern/rna_meta.c
source/blender/makesrna/intern/rna_object_api.c
source/blender/modifiers/intern/MOD_dynamicpaint.c
source/blenderplayer/bad_level_call_stubs/stubs.c
|
|
|
|
Derivedmesh.
Pretty straightforward changes, merely mimicking dm-related code,
which was already essentially using either Mesh or BMesh data to
build the PBVH...
Note that we "lose" the subsurf (a.k.a. grid) PBVH case here, but that
one was already dead code in current blender2.8, since final dm is
always a cddm built from evaluated mesh.
Proper fix is pending new code for subsurf/multires area.
|
|
|
|
Strip unindented comment blocks - mainly headers to avoid conflicts.
|
