Age | Commit message (Collapse) | Author |
|
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
|
|
|
|
Noisy change, but safe, and better do it sooner than later if we are to
rework copying code. Also, previous commit shows this *is* useful to
catch some mistakes.
|
|
|
|
`cd_flag` tends to be used for CustomData flags in mesh area, while for
library_query those are rather callback flags...
|
|
There were two issues here. One is that the fix done originally for this
bug only checks for colliding with the same face as the single preceeding
hit. If the particle hits an edge or vertex of the collider, it in fact
hits two or more faces, so the loop ends up cycling between first two
of them and reaches the max collision limit.
The fix is to disable the collider for the sim step once a permeability
roll succeeds, by adding it to a skip list. Skipping just one face causes
some particles to bounce at odd angles in case of partial permeability.
The second problem was that the collider bounced back a small percentage
of particles, and the cause seemed to be that the code was set to flip
the velocity if the particle was just past the collider but still within
collision distance. Inverting both values causes a half permeable collider
to stop particles, so it seems that this if branch shouldn't bounce at all.
Test file: {F327322}
Reviewers: lukastoenne, brecht
Reviewed By: brecht
Subscribers: brecht, #physics
Maniphest Tasks: T26658
Differential Revision: https://developer.blender.org/D2120
|
|
Turns out most BKE_foo_make_local datablock-specific functions are actually doing
exactly the same thing, only two currently need special additional operations
(object and brush ones). So added a BKE_id_make_local_generic instead
of copying same code over and over.
Also, changed a bit how make_local works in case we are localizing a whole library.
We need to do the 'remap' step (from old linked ID to new local one) in the second loop,
otherwise we miss some dependencies. This fixes main part of T48907.
|
|
used locally.
Will be used by link/append code.
|
|
Now using modern features from libquery/libremap areas.
Provides same kind of fixes/improvements as for BKE_object_make_local() (see rBd1a4ae3f395a6).
|
|
Also allows us to get rid of a few _copy_ex() versions...
|
|
Replaces `G.is_rendering` with `use_render_params` argument.
This is needed for Cycles, which attempts to restore render-preview settings from particles,
after it gets its own particle data, but fails to restore because
`G.is_rendering` was being checked in psys_cache_paths (and other places).
|
|
Useful when BLI_bvhtree_range_query callback calculates a new position to measure from.
|
|
Made those curves local to thread evaluation now, so there is no
threading conflict accessing them from evaluation threads anymore.
|
|
|
|
location.
It also fixes another issue (crash) related to symmetric editing.
Quite involved, we (try to!) fix complete broken logic of parts of particle code, which would use poly index
as tessface one (or vice-versa). Issue most probably goes back to BMesh integration time...
This patch mostly fixes particle editing mode:
- Adding/removing particles when using generative modifiers (like subsurf) should now work.
- Adding/removing particles with a non-tessellated mesh (i.e. one having ngons) should also mostly work.
- X-axis-mirror-editing particles over ngons does not really work, not sure why currently.
- All this in both 'modes' (with or without using modifier stack for particles).
Tech side:
- Store a deformed-only DM in particle modifier data.
- Rename existing DM to make it clear it's a final one.
- Use deformed-only DM's tessface2poly mapping to 'solve' poly/tessface mismatches.
- Make (part of) mirror-editing code able to use a DM instead of raw mesh, so that we can mirror based on final DM
when editing particles using modifier stack (mandatory, since there is no way currently to find orig tessface
from an final DM tessface index).
Note that this patch is not really nice and clean (current particles are beyond hope on this side anyway),
it's more like some urgency bandage. Whole crap needs complete rewrite anyway,
BMesh's polygons make it really hard to work with current system (and looptri would not help much here).
Also, did not test everything possibly affected by those changes, so it needs some users' testing & validation too.
Reviewers: psy-fi
Subscribers: dfelinto, eyecandy
Maniphest Tasks: T47038
Differential Revision: https://developer.blender.org/D1685
|
|
|
|
Was only visible with new dependency graph.
Changing emit_from still doesn't behave fully reliably tho, that needs some
closer investigation.
|
|
Note that the collision modifier doesn't have any use for Loop indices,
so to avoid duplicating the loop array too,
MVertTri has been added which simply stores vertex indices (runtime only).
|
|
This commit only adds callbacks which then later be used with major dependency
graph commit, keeping the upcoming commit more clean to follow.
Should be no functional changes so far still.
|
|
|
|
Added some guards to prevent clumping to non existing particles. Also, adjusted threaded child path evaluation, so each child is evaluated once - previously virtual parents were done twice.
|
|
|
|
This reverts commit b2b54b0902045ec4f0c1a4cae3209be863878f5b.
The patch breaks particle distribution even in simple cases, not worth
doing this for keeping a hackish loophole open.
|
|
Particle textures always override timing information of particles.
Previously particle times could be scripted, but now these changes are
discarded by the texture evaluation function.
The patch disables texture overriding when no textures are defined, this
way at least some old scripts can keep working.
|
|
layer is available.
Otherwise particle mapping to the new mesh cannot work with subdivided
and constructively-modified meshes.
|
|
frequency).
|
|
specific.
|
|
Conflicts:
source/blender/blenkernel/intern/particle.c
|
|
This adds another level of clumping on child hairs. When enabled, child
hairs chose a secondary clumping target using a Voronoi pattern. This
adds visual detail on a smaller scale, which is useful particularly when
the number of parents is relatively small.
Natural fibres behave in a similar way when they become sticky and
intertwined. Hairs close to each other form a first twisted strand, then
combine into larger strands. Similar features can be found in ropes:
http://en.wikipedia.org/wiki/Hair_twists
http://en.wikipedia.org/wiki/Rope
Conflicts:
source/blender/blenloader/intern/versioning_270.c
|
|
|
|
This is an alternative method to the current fixed function with a
clump factor and "shape" parameter. This function is quite limited and
does not give the desired result in many cases (e.g. long, parallel
rasta strands are problematic). So rather than trying to add more
parameters there is now a fully user-defined optional curve for setting
the tapering shape.
|
|
This contains a few pieces of code for a future "modifier" system that
would allow more flexible combination of effects. Eventually a node
system is the way to go, but the current code makes that impossible.
|
|
to prevent double-freeing/invalid mem access.
This can happen with the "virtual parents" feature, which generates both
parent and child paths. Each task free function also freed the shared
context, leading to double freeing.
|
|
distribution code.
|
|
|
|
easier.
This code is badly broken and needs to be replaced, but at least having
a workable code structure might help with quick hacks to fix the worst
cases.
|
|
distribution and path caching for child particles.
This gives a significant improvement of viewport playback performance
with higher child particle counts. Particles previously used their own
threads and had a rather high limit for threading. Also threading
apparently was disabled because only 1 thread was being used ...
|
|
|
|
key values for velocity.
|
|
In rB78c491e the `initialize_particle` function was split into 2 parts for particle texture initialization.
The texture init part however also initializes birth times, which is now missing in the main init function
in some cases (notably when setting start/end directly without a subsequent time step).
|
|
|
|
header.
|
|
in threaded depgraph updates and effector list construction.
Gathering effectors during depgraph updates will call the
psys_check_enabled function. This in turn contained a DNA alloc call
for the psys->frand RNG arrays, which is really bad because data must be
immutable during these effector constructions.
To avoid such allocs the frand array is now global for all particle
systems. To avoid correlation of pseudo-random numbers the psys->seed
value is complemented with random offset and multiplier for the actual
float array. This is not ideal, but work sufficiently well (given that
random numbers were already really limited and show repetition quite
easily for particle counts > PSYS_FRAND_COUNT).
|
|
of particles
Root of the issue goes to the order of particle initialization which does
texture evaluation (which does depend on particle coordinate) and particle
birth coordinate calculation. So basically what happened is:
* Changing number of particles re-allocated all the particles,
which sets their coordinate to (0,0,0)
* Texture evaluation used this non-initialized coordinate
* Coordinates were calculated for particles
Reshuffled code a bit so now texture evaluation happens after particles.
coordinate calculation. Basically moved texture evaluation to particle
reset function. Reset happens after initialization anyway and it does
know particle coordinates. Also, if reset is being called without init
then it's also kind of logical to re-evaluate texture because particle
coordinates might change.
|
|
|
|
Lattice deformation used to store some runtime data
inside of lattice datablock itself. It's something
which is REALLY bad. Ideally DNA shouldn't contain
and runtime data.
For now solved it in a way that initialization of
lattice deform will create a structure which contains
lattice object for which deformation is calculating
and that runtime data which used to be stored in
lattice datablock itself.
It works really fine for mesh deform modifier, but
there's still runtime data stored in particle system
DNA, It didn't look something easy to be solved, so
leaving this as-is for now.
--
svn merge -r58277:58278 -r58795:58796 ^/branches/soc-2013-depsgraph_mt
|
|
rendering. This used to happen in an unneeded frame change update which was
removed. For heavy particle systems this could have a bad impact on viewport
performance after rendering.
|
|
56073.
|
|
generator with a local one. It's not thread safe and will not give repeatable
results, so in most cases it should not be used.
Also fixes #34992 where the noise texture of a displacement modifier was not
properly random in opengl animation render, because the seed got reset to a
fixed value by an unrelated function while for final render it changed each
frame.
|
|
|