Age | Commit message (Collapse) | Author |
|
Without this, there was no way of finding out which object, modifier
combination caused the error, making the logs not very useful
for debugging.
|
|
Reviewers: brecht
Differential Revision: https://developer.blender.org/D8988
|
|
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
|
|
High quality emitters need to maintain state themselves. For example,
this it needs to remember when it spawned the last particle.
This is especially important when the birth rate is changing over time.
Otherwise, there will be very visible artifacts.
It is quite likely that other components of the simulation need their own
state as well. Therefore, I refactored the `SimulationState` type a bit,
to make it more extensible. Instead of using hardcoded type numbers, a
string is used to identify the state type. Also, instead of having switch
statements in many places, there is a new `SimulationStateType` that
encapsulates information about how a specific state is created/freed/copied/...
I removed the integration with the point cache for now, because it was
not used anyway in it's current state.
|
|
Clang Tidy reported a couple of false positives. I disabled
those `NOLINTNEXTLINE`.
Differential Revision: https://developer.blender.org/D8199
|
|
Every Particle Simulation node has a name (or a path when it is in a node group).
This name has to be used in the Simulation modifier on a point cloud to see
the particles.
Caching has been disabled for now, because it was holding back development
a bit. To reset the simulation, go back to frame 1.
Currently, there is no way to influence the simulation. There are just some
randomly moving points. Changing that is the next step.
|
|
Changed variable names from mmd, mds, mfs, and mes to fmd, fds, ffs, and fes. The author of this commits lights a candle for all the merge conflicts this will cause.
|
|
The new simulation type can also reference a point cache, but it is not an object.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D8097
|
|
Reviewers: brecht
Differential Revision: https://developer.blender.org/D7965
|
|
The current particle state is stored in a `CustomData` instance and
the cache is stored in `PointCache`.
The current state exists on the copy-on-write copies of the simulation,
while the cache only exists in the original data block.
This patch implements a temporary trivial particle simulation that does not
use the node system yet. It is used for testing and will be replaced soon.
`PointCache` still has some limitations that need to be overcome using
separate refactorings. For example, we need to be able to store the number
of particles in the point cache. Also we need to change which attributes
are stored for a particle system more dynamically than is currently possible afaik.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D7836
|
|
|
|
|
|
|
|
CacheEditrPathsIterData and PTCacheEdit
Followup to 80cecee5b7c8.
ref D6725
|
|
|
|
A collection of smaller changes that are required in the /blender/source files. A lot of them are also due to variable renaming.
Reviewed By: sergey
Maniphest Tasks: T59995
Differential Revision: https://developer.blender.org/D3855
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
Use prefix now there isn't only the 3d version.
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Done using:
source/tools/utils_maintenance/c_sort_blocks.py
|
|
|
|
|
|
Differential Revision: https://developer.blender.org/D3719
|
|
The idea is to only use pointers to particles in original object when
creating an edit structure. The derived mesh we get from evaluated
object.
The rest of the commit is just keeping pointers in sync.
|
|
Conflicts:
source/blender/blenkernel/BKE_pointcache.h
source/blender/blenkernel/intern/object.c
source/blender/blenkernel/intern/pointcache.c
source/blender/editors/include/ED_particle.h
source/blender/editors/physics/particle_edit.c
source/blender/editors/physics/particle_edit_undo.c
source/blender/editors/physics/particle_object.c
source/blender/editors/physics/physics_intern.h
source/blender/editors/physics/physics_pointcache.c
source/blender/editors/space_time/space_time.c
source/blender/editors/space_view3d/drawobject.c
source/blender/editors/space_view3d/view3d_edit.c
source/blender/editors/transform/transform_conversions.c
source/blender/editors/transform/transform_generics.c
source/blender/editors/transform/transform_manipulator.c
source/blender/makesrna/intern/rna_object.c
source/blender/makesrna/intern/rna_object_force.c
source/blender/makesrna/intern/rna_sculpt_paint.c
source/blenderplayer/bad_level_call_stubs/stubs.c
|
|
Note that due to RNA get/setters issue, that one may actually add some
G.main usages to the total... But at least it's not hidden anymore in a
very low-level, dark corner of BKE pointcache code!
|
|
Conflicts:
source/blender/blenkernel/intern/blendfile.c
source/blender/blenkernel/intern/node.c
source/blender/blenkernel/intern/particle.c
|
|
|
|
|
|
- Undo that changes modes currently asserts,
since undo is now screen data.
Most likely we will change how object mode and workspaces work
since it's not practical/maintainable at the moment.
- Removed view_layer from particle settings
(wasn't needed and complicated undo).
|
|
- Use a single undo history for all operations.
- UndoType's are registered and poll the context to check if they
should be used when performing an undo push.
- Mode switching is used to ensure the state is correct before
undo data is restored.
- Some undo types accumulate changes (image & text editing)
others store the state multiple times (with de-duplication).
This is supported by checking UndoStack.mode `ACCUMULATE` / `STORE`.
- Each undo step stores ID datablocks they use with utilities to help
manage restoring correct ID's.
Needed since global undo is now mixed with other modes undo.
- Currently performs each undo step when going up/down history
Previously this wasn't done, making history fail in some cases.
This can be optimized to skip some combinations of undo steps.
grease-pencil is an exception which has not been updated
since it integrates undo into the draw-session.
See D3113
|
|
|
|
|
|
The RenderResult struct still has a listbase of RenderLayer, but that's ok
since this is strictly for rendering.
* Subversion bump (to 2.80.2)
* DNA low level doversion (renames) - only for .blend created since 2.80 started
Note: We can't use DNA_struct_elem_find or get file version in init_structDNA,
so we are manually iterating over the array of the SDNA elements instead.
Note 2: This doversion change with renames can be reverted in a few months. But
so far it's required for 2.8 files created between October 2016 and now.
Reviewers: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D2927
|
|
|
|
Engine is not stored in WorkSpaces. That defines the "context" engine, which
is used for the entire UI.
The engine used for the poll of nodes (add node menu, new nodes when "Use Nodes")
is obtained from context.
Introduce a ViewRender struct for viewport settings that are defined for
workspaces and scene. This struct will be populated with the hand-picked
settings that can be defined per workspace as per the 2.8 design.
* use_scene_settings
* properties editor: workshop + organize context path
Use Scene Settings
==================
For viewport drawing, Workspaces have an option to use the Scene render
settings (F12) instead of the viewport settings.
This way users can quickly preview the final render settings, engine and
View Layer. This will affect all the editors in that workspace, and it will be
clearly indicated in the top-bar.
Properties Editor: Add Workspace and organize context path
==========================================================
We now have the properties of:
Scene, Scene > Layer, Scene > World, Workspace
[Scene | Workspace] > Render Layer > Object
[Scene | Workspace] > Render Layer > Object > Data
(...)
Reviewers: Campbell Barton, Julian Eisel
Differential Revision: https://developer.blender.org/D2842
|
|
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
|
|
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
|
|
This reverts commit 5aa19be91263a249ffae75573e3b32f24269d890 and b4a721af694817fa921b119df83d33ede7d7fed0.
Due to postponement of particle system rewrite it was decided to put particle code
back into the 2.8 branch for the time being.
|
|
Point cache read code contains checks designed to prevent it reading
stale data when the relevant simulation code should instead compute
the next frame from the previous one. However in some situations like
motion blur subframes the simulation can't possibly do it and just
exits. This causes completely incorrect motion blur at or after the
last cached frame.
To fix, add a parameter that tells the cache code whether it should
apply the checks and exit, or read what it can even if stale (true
means exactly same as old behavior).
Doing this in cache rather than clamping the frame number better in
the caller lets it handle the case of incomplete cache that stops
before the official last frame.
Reviewed By: mont29, lukastoenne
Maniphest Tasks: T49004
Differential Revision: https://developer.blender.org/D2144
|
|
|
|
|
|
|
|
|
|
|
|
simulations.
This commits implements OpenVDB as an extra cache format in the Point
Cache system for smoke simulations. Compilation with the library is
turned off by default for now, and shall be enabled when the library is
present.
A documentation of its doings is available here: http://
wiki.blender.org/index.php/User:Kevindietrich/OpenVDBSmokeExport.
A guide to compile OpenVDB can be found here (Linux): http://
wiki.blender.org/index.php?title=Dev:Doc/Building_Blender/Linux/
Dependencies_From_Source#OpenVDB
Reviewers: sergey, lukastoenne, brecht, campbellbarton
Reviewed By: brecht, campbellbarton
Subscribers: galenb, Blendify, robocyte, Lapineige, bliblubli,
jtheninja, lukasstockner97, dingto, brecht
Differential Revision: https://developer.blender.org/D1721
|
|
Reviewers: brecht
Differential Revision: https://developer.blender.org/D1731
|