| Age | Commit message (Collapse) | Author |
|---|
|
We now use a for_each function with callback to iterate through all sequences in the scene.
This has the benefit that we now only loop over the sequences in the scene once.
Before we would loop over them twice and allocate memory to store temporary data.
The allocation of temporary data lead to unintentional memory leaks if the code used returns to exit out of the iteration loop.
The new for_each callback method doesn't allocate any temporary data and only iterates though all sequences once.
Reviewed By: Richard Antalik, Bastien Montagne
Differential Revision: http://developer.blender.org/D12278
|
|
This patch exposes the Cycles Alembic Procedural through the MeshSequenceCache
modifier in order to use and test it from Blender.
To enable it, one has to switch the render feature set to experimental and
activate the Procedural in the modifier. An Alembic Procedural is then
created for each CacheFile from Blender set to use the Procedural, and each
Blender object having a MeshSequenceCache modifier is added to list of objects
of the right procedural.
The procedural's parameters derive from the CacheFile's properties which are
already exposed in the UI through the modifier, although more Cycles specific
options might be added in the future.
As there is currently no cache controls and since we load all the data at the
beginning of the render session, the procedural is only available during
viewport renders at the moment. When an Alembic procedural is rendered, data
from the archive are not read on the Blender side.
If a Cycles render is not active and the CacheFile is set to use the Cycles Procedural,
bounding boxes are used to display the objects in the scene as a signal that the
objects are not processed by Blender anymore. This is standard in other DCCs.
However this does not reduce the memory usage from Blender as the Alembic data
was already loaded either during an import or during a .blend file read.
This is mostly a hack to test the Cycles Alembic procedural until we have a
better Blender side mechanism for letting renderers load their own geometry,
which will be based on import and export settings on Collections (T68933).
Ref T79174, D3089
Reviewed By: brecht, sybren
Maniphest Tasks: T79174
Differential Revision: https://developer.blender.org/D10197
|
|
Confusingly, BKE_scene_frame_get did not match the frame number as expected by
BKE_scene_frame_set. Instead it return the value after time remapping, which
is commonly named "ctime".
* Rename BKE_scene_frame_get to BKE_scene_ctime_get
* Add a new BKE_scene_frame_get that matches BKE_scene_frame_set
* Use int/float depending if fractional frame is expected
|
|
We weren't clearing the recalc flags for that case.
|
|
'orient_type'
`orient_index` is a more comprehensive value as it reveals both the type and index.
Differential Revision: https://developer.blender.org/D9595
|
|
|
|
Previously, it was only forbidden to delete the last scene. This can
lead to the situation where a .blend file only contains linked scenes.
This is problematic, because linked data might not always be available
or can be removed from a .blend file without having an additional check
for remaining scenes.
Now there always has to be at least one local scene.
Reviewers: mont29
Differential Revision: https://developer.blender.org/D10049
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
No functional changes
|
|
Split the depsgraph allocation into a separate function
`BKE_scene_ensure_depsgraph()`. Parameters are only passed to those
functions that actually need them. This removes the the "if that boolean
is `false` this pointer is allowed to be `NULL`" logic and more cleanly
decouples code.
No functional changes.
|
|
For the sanity checks to work we don't actually need to check other
scenes. So this function can be simplified so that it does not require
a `Main *`.
Mistake in 5cc08510e0a6.
|
|
Users may input an invalid scene/view-layer combination via Python. We
can easily detect that and fail gracefully.
Besides checking input parameters in RNA, also assert the
scene/view-layer combination is valid in lower level Depsgraph lookup
function (called by statistics query).
|
|
Reviewers: sergey
Differential Revision: https://developer.blender.org/D8613
|
|
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
|
|
Matches other similar cases for collection and object, and general
naming rule (copy is for generic ID copying, duplicate is for more
involved and poweful behaviors specific to an ID type).
|
|
|
|
Scene audio volume changes require the scene to be tagged with
`ID_RECALC_AUDIO_VOLUME` (see `BKE_scene_update_sound()`). Tagging
happens in the RNA update function `rna_Scene_volume_update()`, but that
function is not called by the animation system. As a result, animated
volume changes are not sent to the audio system.
This commit adds a new depsgraph operation node that sets this tag when
necessary, so that the animated values are used in the rest of the
depsgraph evaluation.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7429
|
|
Extract will steal all depsgraphs currently stored in given bmain, and
restore will put them back in place, using scene and viewlayers as keys.
Preliminary work for undo-speedup.
Part of T60695/D6580.
|
|
|
|
Reviewers: sergey
Differential Revision: https://developer.blender.org/D7110
|
|
|
|
Also avoid a redundant strlen call.
|
|
Instead of using anonymous booleans flags, also allows to keep the same
behavior in all cases, without needing special handling from calling
code for our beloved oddballs object proxies...
|
|
For Freestyle, it helps to move the struct copy from C++ to C, where the
compiler knows that copying deprecated members is ok.
|
|
|
|
Side-reported in T70505.
Code did not ensure deleted object was removed from the RBW constraints
collection, leading to some invalid status (object in constraints
collection but without relevant contraints data).
Also fixed another issue - code deleting RBW objects would try to remove
any constraint one using it as target, in a very bad and broken way,
since you cannot iterate over objects of a collection while removing
some... Now instead just NULLify relevant pointers... I hope it works,
otherwise we'll have to take a different approach.
Needless to stress again how weak the whole RBW code is in general, and
regarding same object being used by RBW in more than one scene in particular,
that is known broken situation anyway.
|
|
Currently unused, but will allow to keep of an owner of the depsgraph.
Could also simplify other APIs in the future by avoiding to pass bmain
explicitly to relation update functions and things like that.
|
|
|
|
Thanks to @sybren for pointing out issue from 299ff91ea1fe5
|
|
Part of the issue was caused by missing speaker objects in the depsgraph
used for post-processing.
Remaining part was caused by missing scene sound update for this depsgraph.
|
|
This change makes it so sound handles are created for evaluated scene,
sequencer and speakers. This allows to have properly evaluated animation
on them.
For the viewport playback sound uses regular dependency graph.
For the final render sound uses dependency graph created for render pipeline,
which now also contains sequencer and sound datablocks.
All the direct sound update calls are replaced with corresponding dependency
graph recalc tag.
|
|
Only affects when an evaluated dependency graph is requested via
context.
Makes it cheap to call when there are no changes made to the graph
|
|
Avoids having to check rotation modes to get the orientation.
|
|
This happened to be a bigger rabbit hole to hell than it originally seemed,
and there are higher priority design tasks to be handled (at this point high
priority design task is more important than high priority bug fix).
After talking to Brecht the decision was made to revert to the known isolated
issue, which will allow everyone in the studio work same as prior to last
Friday.
The remaining bits will be worked on after all the design tasks are out of
the way.
This commit reverts:
4cdb4b9532c Fix T64161: Crashing using undo and multiple windows
064273a4ae7 Sound: Port more cases to be a part of dependency graph
2e582f8ab53 Sound: Fix access wrong dependency graph
5fc49d9c915 Sound: add stubs to build without audaspace
c68c81a870b Sound: Make sure spin lock is initialized for new sound datablocks
c02534469ac Sound: Delay creating sound scene handle for until is needed
9f681bea68f Fix T64144: Crash when displaying audio waveforms in VSE
2f79286453e Cleanup: unused vars
bed8ad6f95a Fix crash in background rendering after recent sound changes
773691310f9 Fix T64143: Crash when scrubbing in the graph editor
888852055c1 Sound: Fix for being unable to jump to a frame during playback with A/V sync
6ab7b384645 Sound: More fixes for access of original scene
35db1195455 Sound: Fix access original scene during playback
211c4fd2e9a Depsgraph: Make comment about evaluation more obvious
c5fe16e121e Sound: Make sound handles only be in evaluated datablocks
b4e1e0946bf Depsgraph: Preserve sound and audio pointers through copy-on-write
4eedf784b04 Depsgraph: Store original sequencer strip pointer
6990ef151c1 Sound: Move evaluation to dependency graph
d02da8de23b Sound: Delay opening handlers for until really needed
3369b828916 Depsgraph: Add scene audio component
e8f10d64757 Depsgraph: Tag sequencer for update on changes
6e4b7a6e4d9 Depsgraph: Initial work to cover sequencer
17447ac5a6b Depsgraph: Make sound ID part of the graph
|
|
|
|
The sound handles are still in the original datablocks, so it's easier
to test since there should be no functional changes.
|
|
Note the fix for T62865 is still working fine.
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
Based on feedback from animators, this is useful to keep as a view
option (as in 2.7x).
Now the transform gizmos can be enabled from the popover,
the tools still work for location/scale/rotation.
The transform tool has been removed.
See T63518
|
|
collections'.
'Linked objects' option was not behaving correctly before, effectively
linking in collections, so this one has been renamed to just 'Linked Copy',
and gives a fully shallow copy of current scene.
'Linked Obdata' was not really useful, kind of confusing, and was
painful to maintain, so dropping it now.
|
|
Add buttons for editing the cursor rotation as well as rotation modes,
similar to object and pose bones.
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Done using:
source/tools/utils_maintenance/c_sort_blocks.py
|
|
|
|
This aims to resolve a conflict where some users want to keep keyboard
axis setting global, even when the orientation is set to something else.
Move/rotate/scale can optionally each have a separate orientation.
Some UI changes will be made next.
|
|
Neither is very descriptive for its task, but at least workbench is more
future proof and distinguishes it from Eevee.
|
|
Since that call make the graph active, it should only be used in active
editing context aware code (i.e. essentially, operators).
|
