| Age | Commit message (Collapse) | Author |
|---|
|
MSVC used to warn about const mismatch for arguments passed by value.
Remove these as newer versions of MSVC no longer show this warning.
|
|
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
- Minor improvements to doc-strings.
Ref T92709
|
|
.blend file.
Relying on pointer addresses across different data-blocks is extremely
not recommended (and should be strictly forbidden ideally), in
particular in direct_link step of blend file reading.
- It assumes a specific order in reading of data, which is not ensured
in future, and is in any case a very bad, non explicit, hidden
dependency on behaviors of other parts of the codebase.
- It is intrinsically unsafe (as in, it makes writing bad code and making
mistakes easy, see e.g. fix in rB84b3f6e049b35f9).
- It makes advanced handling of data-blocks harder (thinking about
partial undo code e.g., even though in this specific case it was not
an issue as we do not re-read neither windowmanagers nor worspaces
during undo).
New code uses windows' `winid` instead as 'anchor' to find again proper
workspace hook in windows at read time.
As a bonus, it will also cleanup the list of relations from any invalid
ones (afaict it was never done previously).
Differential Revision: https://developer.blender.org/D9073
|
|
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
|
|
* Simplify workspace API a bit
* Comment on behavior of workspace-layout relations where exposed in API
* Remove annoying getters/setters
* Avoid lookups if we can early exit
* A NULL check is removed in `direct_link_workspace()` that I don't see
a need for. Am not 100% sure though, fingers crossed.
In general these changes should improve readability and make things
easier to reason about.
|
|
|
|
|
|
|
|
Workspaces refreshes tools multiple times when used by multiple windows.
Also improve comments.
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Done using:
source/tools/utils_maintenance/c_sort_blocks.py
|
|
Also clear tools for the default startup file
so changes to defaults apply to new files.
|
|
It was a bit odd that the scene was stored per window but not the view
layer. The reasoning was that you would use different view layers for
different tasks. This is still possible, but it's more predictable to
switch them both explicitly, and with child window support manually
syncing the view layers between multiple windows is no longer needed
as often.
|
|
|
|
Don't store pointers to ViewLayer in the workspace, only names. Add specific
relation type since the generic mechanism makes the code hard to follow.
Integrate with pointer restore for undo and library remapping code to avoid
data going out of sync.
Also add relation automatically if there doesn't exists one yet in
BKE_workspace_view_layer_get, because in general it's really hard to ensure
it will exist when making arbitrary scene changes.
Differential Revision: https://developer.blender.org/D3432
|
|
Use render settings and active view layer will be handled elsewhere.
Also change icon to not be confusing with render layers.
Probably we should get rid of the workspace tab entirely and do it in
the user preferences, but that's for later.
|
|
ViewRender was removed, which means we can't get the render engine for files
saved in 2.8. We assume that any files saved in 2.8 were intended to use Eevee
and set the engine to that.
A fix included with this is that .blend thumbails now draw with Clay mode,
and never Eevee or Cycles. These were drawn with solid mode in 2.7, and should
be very fast and not e.g. load heavy image textures.
Differential Revision: https://developer.blender.org/D3156
|
|
This was stored in the workspace, selected from the view.
Move both to scene since custom orientations are closely related to your
scene data.
|
|
The depsgraph was always created within a fixed evaluation context. Passing
both risks the depsgraph and evaluation context not matching, and it
complicates the Python API where we'd have to expose both which is not so
easy to understand.
This also removes the global evaluation context in main, which assumed there
to be a single active scene and view layer.
Differential Revision: https://developer.blender.org/D3152
|
|
The depsgraph now contains all the state needed to evaluate it.
Differential Revision: https://developer.blender.org/D3147
|
|
This caused too many problems syncing object modes
with multiple objects/windows/workspaces, see: D3130 for details.
|
|
Allows for each workspace to have it's own add-ons on display.
Filtering for: Panels, Menus, Keymaps & Manipulators.
Automatically applies to add-ons at the moment.
Access from workspace, toggled off by default
once enabled, add-ons can be white-listed.
See D3076
|
|
Add ED_screen_window_find, BKE_workspace_edit_object
|
|
- Read-only access can often use EvaluationContext.object_mode
- Write access to go to WorkSpace.object_mode.
- Some TODO's remain (marked as "TODO/OBMODE")
- Add-ons will need updating
(context.active_object.mode -> context.workspace.object_mode)
- There will be small/medium issues that still need resolving
this does work on a basic level though.
See D3037
|
|
This made vertex/weight/sculpt crash.
Add BKE_workspace_update_object_mode which sets the object mode from the
workspace.
We may want to re-visit exactly when this is set, for now call within
wm_event_do_refresh_wm_and_depsgraph.
|
|
Instead of storing a single active view-layer in the workspace, one is
stored for each scene the workspace showed before.
With this, some things become possible:
* Multiple windows in the same workspace but showing different scenes.
* Toggling back and forth scene keeps same active view-layer for each scene.
* Activating workspace which didn't show current scene before, the current view-layer is kept.
A necessary evil for this is that accessing view-layer and object mode
from .py can't be done via workspace directly anymore. It has to be done
through the window, so RNA can use the correct scene.
So instead of `workspace.view_layer`, it's `window.view_layer` now (same
with mode) even though it's still workspace data.
Fixes T53432.
|
|
While this probably isn't the final solution we'll go with, it's nicer
as current one, which was basically broken. So consider this as
temporary solution.
It also allows testing how changing workspace changes mode & active
object, but only by having the workspaces use different view-layers.
Decided to remove WorkSpace.mode for now. If we need to bring it back,
we'll have to version patch it anyway.
|
|
The RenderResult struct still has a listbase of RenderLayer, but that's ok
since this is strictly for rendering.
* Subversion bump (to 2.80.2)
* DNA low level doversion (renames) - only for .blend created since 2.80 started
Note: We can't use DNA_struct_elem_find or get file version in init_structDNA,
so we are manually iterating over the array of the SDNA elements instead.
Note 2: This doversion change with renames can be reverted in a few months. But
so far it's required for 2.8 files created between October 2016 and now.
Reviewers: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D2927
|
|
Depsgraph itself is still created fer the whole scene rather than for a
single layer, this is to be addressed next.
The storage for those dependency graphs is in scene, but now it is a hash
indexed by layer. In the future we can extend hash key to include extra
information (workspace? window?).
|
|
|
|
Engine is not stored in WorkSpaces. That defines the "context" engine, which
is used for the entire UI.
The engine used for the poll of nodes (add node menu, new nodes when "Use Nodes")
is obtained from context.
Introduce a ViewRender struct for viewport settings that are defined for
workspaces and scene. This struct will be populated with the hand-picked
settings that can be defined per workspace as per the 2.8 design.
* use_scene_settings
* properties editor: workshop + organize context path
Use Scene Settings
==================
For viewport drawing, Workspaces have an option to use the Scene render
settings (F12) instead of the viewport settings.
This way users can quickly preview the final render settings, engine and
View Layer. This will affect all the editors in that workspace, and it will be
clearly indicated in the top-bar.
Properties Editor: Add Workspace and organize context path
==========================================================
We now have the properties of:
Scene, Scene > Layer, Scene > World, Workspace
[Scene | Workspace] > Render Layer > Object
[Scene | Workspace] > Render Layer > Object > Data
(...)
Reviewers: Campbell Barton, Julian Eisel
Differential Revision: https://developer.blender.org/D2842
|
|
There is no reason to be special for workspace and go against other design
decision in Blender. If something like this is going to become a common
practice in Blender it should be well thought and well tested, including
tests of all supported compilers and configurations.
This feature was relying on type re-definition, which is not only confusing
but also available in C11 only.
|
|
This commit moves the list of transform orientations from scenes to workspaces.
Main reasons for this are:
* Transform orientations are UI data and should not be stored in the scene.
* Introducion of workspaces caused some (expected) glitches with transform orientations. Mainly when removing one.
* Improves code.
More technically speaking, this commit does:
* Move list of custom transform orientations from Scene to WorkSpace struct.
* Store active transform orientation index separate from View3D.twmode (twmode can only be set to preprocessor defined values now).
* Display custom transform orientation name in header when transforming in it (used to show "global" which isn't really correct).
|
|
This commit does the main integration of workspaces, which is a design we agreed on during the 2.8 UI workshop (see https://wiki.blender.org/index.php/Dev:2.8/UI/Workshop_Writeup)
Workspaces should generally be stable, I'm not aware of any remaining bugs (or I've forgotten them :) ). If you find any, let me know!
(Exception: mode switching button might get out of sync with actual mode in some cases, would consider that a limitation/ToDo. Needs to be resolved at some point.)
== Main Changes/Features
* Introduces the new Workspaces as data-blocks.
* Allow storing a number of custom workspaces as part of the user configuration. Needs further work to allow adding and deleting individual workspaces.
* Bundle a default workspace configuration with Blender (current screen-layouts converted to workspaces).
* Pressing button to add a workspace spawns a menu to select between "Duplicate Current" and the workspaces from the user configuration. If no workspaces are stored in the user configuration, the default workspaces are listed instead.
* Store screen-layouts (`bScreen`) per workspace.
* Store an active screen-layout per workspace. Changing the workspace will enable this layout.
* Store active mode in workspace. Changing the workspace will also enter the mode of the new workspace. (Note that we still store the active mode in the object, moving this completely to workspaces is a separate project.)
* Store an active render layer per workspace.
* Moved mode switch from 3D View header to Info Editor header.
* Store active scene in window (not directly workspace related, but overlaps quite a bit).
* Removed 'Use Global Scene' User Preference option.
* Compatibility with old files - a new workspace is created for every screen-layout of old files. Old Blender versions should be able to read files saved with workspace support as well.
* Default .blend only contains one workspace ("General").
* Support appending workspaces.
Opening files without UI and commandline rendering should work fine.
Note that the UI is temporary! We plan to introduce a new global topbar
that contains the workspace options and tabs for switching workspaces.
== Technical Notes
* Workspaces are data-blocks.
* Adding and removing `bScreen`s should be done through `ED_workspace_layout` API now.
* A workspace can be active in multiple windows at the same time.
* The mode menu (which is now in the Info Editor header) doesn't display "Grease Pencil Edit" mode anymore since its availability depends on the active editor. Will be fixed by making Grease Pencil an own object type (as planned).
* The button to change the active workspace object mode may get out of sync with the mode of the active object. Will either be resolved by moving mode out of object data, or we'll disable workspace modes again (there's a `#define USE_WORKSPACE_MODE` for that).
* Screen-layouts (`bScreen`) are IDs and thus stored in a main list-base. Had to add a wrapper `WorkSpaceLayout` so we can store them in a list-base within workspaces, too. On the long run we could completely replace `bScreen` by workspace structs.
* `WorkSpace` types use some special compiler trickery to allow marking structs and struct members as private. BKE_workspace API should be used for accessing those.
* Added scene operators `SCENE_OT_`. Was previously done through screen operators.
== BPY API Changes
* Removed `Screen.scene`, added `Window.scene`
* Removed `UserPreferencesView.use_global_scene`
* Added `Context.workspace`, `Window.workspace` and `BlendData.workspaces`
* Added `bpy.types.WorkSpace` containing `screens`, `object_mode` and `render_layer`
* Added Screen.layout_name for the layout name that'll be displayed in the UI (may differ from internal name)
== What's left?
* There are a few open design questions (T50521). We should find the needed answers and implement them.
* Allow adding and removing individual workspaces from workspace configuration (needs UI design).
* Get the override system ready and support overrides per workspace.
* Support custom UI setups as part of workspaces (hidden panels, hidden buttons, customizable toolbars, etc).
* Allow enabling add-ons per workspace.
* Support custom workspace keymaps.
* Remove special exception for workspaces in linking code (so they're always appended, never linked). Depends on a few things, so best to solve later.
* Get the topbar done.
* Workspaces need a proper icon, current one is just a placeholder :)
Reviewed By: campbellbarton, mont29
Tags: #user_interface, #bf_blender_2.8
Maniphest Tasks: T50521
Differential Revision: https://developer.blender.org/D2451
|
