Age | Commit message (Collapse) | Author |
|
This adds extra deform modes to the slide mode of the Topology
Slide/Relax brush (both slide and smear are almost identical).
This is useful to move topology to a specific area to add more localized
details
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8349
|
|
This issue was produced by a hack in the sculpt mode code from 2.80
when the sculpt API for connectivity info was not available.
The smooth brush was the only brush that needed connectivity info,
so there were 3 different smooth functions with the connectivity
queries implemented for dyntopo, meshes and grids. The mesh version
of smoothing was checking the number of connected faces to a vertex
to mask the mesh boundaries, which was not covering all cases and
was hardcoded in the smooth function itself.
This patch removes all those legacy functions and unifies all
smooth functions into a single one using the new API and the
automasking system. In order to achieve this, there were needed
some extra changes:
- The smooth brush now does not automasks the boundaries by default,
so its default preset needs to be updated to enable automasking
- The mesh boundary info is extracted once and cached in a
bitmap, similar to the disconnected elements IDs. This makes
boundary detection work as expected in all cases, solving a lot
of known issues with the smooth brush. In multires, this info is
extracted and cached only at the base mesh level, so it is much
more memory efficient than the previous automasking system.
- In order to keep the brushes responsive as they were before,
the automasking system can now skip creating the cache when it
is not needed for the requested options. This means that for
high poly meshes and simple automasking options the brushes
won't lag on start.
Reviewed By: sergey
Maniphest Tasks: T78747
Differential Revision: https://developer.blender.org/D8260
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/blenkernel` module. Not all warnings are
addressed in this commit.
No functional changes.
|
|
This option allows posing meshes with different disconnected elements
using the Pose Brush.
This is achieved by doing the following:
- Creating an ID per vertex that stores the connected component of that vertex.
- By using those IDs, one fake topology connection is created per vertex to the nearest vertex in a different ID. The maximum distance to create that connection is determined by the "Max Element Distance" property. These fake connectivity neighbors are used in the Sculpt API functions iterators, so all the algorithms of the Pose Brush can run without modifications as if everything was part of the same mesh.
In order to make this work, the "Connected only" property of the Pose Brush needs to be disabled. This will add an extra performance cost to the Pose Brush and its preview. To achieve optimal results, max element distance should be as low as possible.
Reviewed By: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D7282
|
|
The defaults for the Smear tool were making it too weak in high poly
meshes, specially the alpha/pressure option enabled by default. Now this
option is disabled, it has a linear pressure curve and less spacing.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8134
|
|
In some situations, the previous brush is not set. This usually happens with previous version files.
Related to T78155.
|
|
Sculpt Vertex Colors is a painting system that runs inside sculpt mode, reusing all its tools and optimizations. This provides much better performance, easier to maintain code and more advanced features (new brush engine, filters, symmetry options, masks and face sets compatibility...). This is also the initial step for future features like vertex painting in Multires and brushes that can sculpt and paint at the same time.
This commit includes:
- SCULPT_UNDO_COLOR for undo support in sculpt mode
- SCULPT_UPDATE_COLOR and PBVH flags and rendering
- Sculpt Color API functions
- Sculpt capability for sculpt tools (only enabled in the Paint Brush for now)
- Rendering support in workbench (default to Sculpt Vertex Colors except in Vertex Paint)
- Conversion operator between MPropCol (Sculpt Vertex Colors) and MLoopCol (Vertex Paint)
- Remesher reprojection in the Voxel Remehser
- Paint Brush and Smear Brush with color smoothing in alt-smooth mode
- Parameters for the new brush engine (density, opacity, flow, wet paint mixing, tip scale) implemented in Sculpt Vertex Colors
- Color Filter
- Color picker (uses S shortcut, replaces smooth)
- Color selector in the top bar
Reviewed By: brecht
Maniphest Tasks: T72866
Differential Revision: https://developer.blender.org/D5975
|
|
The previous value was Stroke only.
|
|
The materials was not initializated in the right mode.
|
|
|
|
This was introduced by commit rBe58525706328
Now, the brush is not changed when change mode.
Thanks @Alaska for helping with this bug.
|
|
|
|
This error was introduced wit the change in commit https://developer.blender.org/rB6a850f3cc840
As the brushes were not created, all modes except Edit were broken.
Now, the brushes and palette are not created when load the file in versioning code, but when the mode is enabled.
Also, if the brush already exist, the parameters are not reset as it was done in the versioning code in order to keep user settings.
The same logic is used for the default palette.
|
|
|
|
Now the brushes have several new random settings and use curves to define the effect. The curves have been moved below the parameter to keep UI standards and extra curve panels have been removed.
{F8505387}
The new curves are:
* Hue.
* Saturation.
* Value.
New option to random at stroke level instead to random at point level for the following values:
* Thickness.
* Strength.
* UV.
* Hue.
* Saturation.
* Value.
Curves have been moved below the corresponding parameter and only are displayed in properties panel. Display the curves in the popover made it unusable.
{F8505392}
Also, the Pressure random has been renamed to Radius because the old name was not clear enough.
Reviewed By: mendio, pablovazquez
Differential Revision: https://developer.blender.org/D7577
|
|
|
|
In previous commit the pressure was disabled by error.
|
|
|
|
More small tweaks to get the right "feeling" when drawing.
The defaults has been tested by @pepeland.
|
|
|
|
- Pass in return arguments last.
- Pass in RGBA as a vector.
- Use boolean return argument.
|
|
Removed old duplicated brushes and change the settings of some brushes.
|
|
The Layer brush was in Blender before 2.81, when the sculpt API was
introduced. It had a huge amount of bugs and glitches which made it
almost unusable for anything but the most trivial cases. Also, it needed
some hacks in the code just to support the persistent base.
The brush was completely rewritten using the Sculpt API. It fulfills the
same use case as the old one, but it has:
- All previous artifacts fixed
- Simpler code
- Persistent base now works with multires thanks to the sculpt API
- Small cursor widget to preview the layer height
- More controllable and smoother strength and deformation
- More correct masking support
- More predictable invert support. When using persistent base, the brush invert mode resets to layer height 0, instead of jumping from +1 to -1. The brush can still be inverted in the brush direction property.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7147
|
|
|
|
This implements the Surface Smooth Brush as a mode inside the Smooth tool,
which uses the HC algorithm from "Improved Laplacian Smoothing of Noisy Surface Meshes".
Comparted to the regular smooth brush with laplacian smooth, this brush removes
the surface while preserving the volume of the object.
The smooth result can be controlled by tweaing the original shape preservation,
displacement and iteration count.
The same surface smooth operation is also available as a mesh filter.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7057
|
|
|
|
|
|
Hardness is now a property implemented for all brushes, so this is no
longer needed.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7078
|
|
This commit is a full refactor of the grease pencil modules including Draw Engine, Modifiers, VFX, depsgraph update, improvements in operators and conversion of Sculpt and Weight paint tools to real brushes.
Also, a huge code cleanup has been done at all levels.
Thanks to @fclem for his work and yo @pepeland and @mendio for the testing and help in the development.
Differential Revision: https://developer.blender.org/D6293
|
|
While it might be handy to have type-less functionality which is
similar to how C++ math is implemented it can not be easily achieved
with just preprocessor in a way which does not have side-effects on
wrong usage.
There macros where often used on a non-trivial expression, and there
was at least one usage where it was causing an actual side effect/bug
on Windows (see change around square_f(sh[index++]) in studiolight.c).
For such cases it is handy to have a function which is guaranteed to
have zero side-effects. The motivation behind actually removing the
macros is that there is already a way to do similar calculation. Also,
not having such macros is a way to guarantee that its usage is not
changed in a way which have side-effects and that it's not used as an
inspiration for cases where it should not be used.
Differential Revision: https://developer.blender.org/D7051
|
|
|
|
Face Sets are the new system to control the visibility state of the mesh in sculpt and paint modes. They are designed to work in modes where brushes are the primary way of interaction and they provide much more control when working with meshes with complex shapes and overlapping surfaces.
This initial commit includes:
- Sculpt Face Sets data structures and PBVH rendering.
- Face Set overlay and opacity controls.
- Sculpt Undo support.
- Remesher reprojection support. The visibility state of the mesh is also preserved when remeshing.
- Automasking and Mesh filter support.
- Mask expand operator mode to expand Face Sets (Shift + W) and flood fill areas by connectivity (press Ctrl while expanding).
- Sculpt Mode Face Sets and Visibility API.
- Sculpt Face Sets creation and visibility management operators.
- Operator to randomize the Face Sets colors.
- Draw Face Sets brush tool to create and edit the Face Sets. Drawing on the mesh creates a new Face Set. Pressing Ctrl before drawing modifies the Face Set under the brush at the beginning of the stroke.
- Updated keymap and menu to work with Face Sets from Sculpt Mode (H to toggle visibility, Alt + H to show all, Shit + H to hide).
- Pie menu on the W key with Face common Sets operations.
Know limitations:
- Multires support. The Face Sets and Visibility API needs to be implemented for Multires.
Reviewed By: jbakker, #user_interface, Severin
Differential Revision: https://developer.blender.org/D6070
|
|
Instead of using anonymous booleans flags, also allows to keep the same
behavior in all cases, without needing special handling from calling
code for our beloved oddballs object proxies...
|
|
Also removed some only used locally from the header, `BKE_lib_id.h`
is already way too big, no need to overload it with unused things.
|
|
Just add it to the list or properties to reset from DNA_brush_defaults
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6992
|
|
Clay Thumb was using a custom hardness implementation and value to make
it functional. Hardness is now a property of brushes and it is
implemented for all brushes, so this is no longer needed.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6981
|
|
This brush has a simple physics solver that helps when sculpting cloth.
- The mass and the damping properties of the simulation are properties of the brush.
- It has two additional radius control to limit the influence and falloff of the simulation.
- Masked vertices are pinned in the simulation, and it applies the sculpt gravity directly in the solver.
- The Cloth Brush has 7 deformation modes with 2 falloff types (radial and plane).
The brush can create the constraints only on the required PBVH nodes, so the simulation is isolated on high poly meshes. As long
as the brush size is not too big it should be possible to keep it real time.
Known issues:
- The way constraints are created is extremely basic and it creates repeated constraints. Maybe there is another way to create fewer constraints while keeping the simulation quality decent. This part can also be multithreaded. (As it is it works ok, but it could be better)
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6715
|
|
Some users reported that the previous red color of the cursor was too
saturated and that can be distracting.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6828
|
|
Slide/Relax is a deform tool, so the color should be yellow.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6827
|
|
This enables an extra layer of control in the sculpt brushes.
For now it is enabled only in Scrape, but it should work in all brushes (like normal radius). In the future it may also be enabled in other brushes.
You can tweak in this property in the scrape brush to achieve a much better behavior when working on curve surfaces and control how much volume you want to trim. In most cases, it also fixes the bug where the brush keeps trimming in the same area without disabling accumulate.
It should be possible to fix some other artifacts in other brushes by tweaking this default property.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D5993
|
|
This patch allow to change the brush tip shape between a square and a
circle using a brush property.
After this change we are no longer testing the distance against a cube
(the Z axis is not used). I did not test this in depth, but if it does
not produce any artifacts I think we can keep it this way instead of
adding more complexity to the code.
In this new distance test the brush falloff is only applied on the
rounded parts of the square to avoid sharp artifacts in the
diagonals. Because of this, the round version is much softer than
the square one. The planned hardness property will fix this, but
this can also be avoided by setting the fallof to a custom curve.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6165
|
|
The IK chain was using an anchor point by default as it makes sense for
posing, but for creating curved shapes it is useful to be able to
disable it.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6584
|
|
This brush simulates deforming clay with your fingers, accumulating
material during the stroke. It has a plane that tilts during the stroke
in the front part of the brush to achieve this effect.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6238
|
|
Note that `BKE_library.h`/`library.c` were renamed to
`BKE_lib_id.h`/`lib_id.c` to avoid having a too generic name here.
Part of T72604.
|
|
Old Name New Name
========= =========
init_def_material BKE_materials_init
BKE_material_gpencil_default_free BKE_materials_exit
test_object_materials BKE_object_materials_test
test_all_objects_materials BKE_objects_materials_test_all
give_matarar BKE_object_material_array
give_totcolp BKE_object_material_num
give_current_material_p BKE_object_material_get_p
give_current_material BKE_object_material_get
assign_material BKE_object_material_assign
assign_matarar BKE_object_material_array_assign
give_matarar_id BKE_id_material_array
give_totcolp_id BKE_id_material_num
assign_material_id BKE_id_material_assign
clear_matcopybuf BKE_material_copybuf_clear
free_matcopybuf BKE_material_copybuf_free
copy_matcopybuf BKE_material_copybuf_copy
paste_matcopybuf BKE_material_copybuf_paste
BKE_material_init_gpencil_settings BKE_gpencil_material_attr_init
BKE_material_add_gpencil BKE_gpencil_material_add
BKE_material_gpencil_get BKE_gpencil_material
BKE_material_gpencil_default_get BKE_gpencil_material_default
BKE_material_gpencil_settings_get BKE_gpencil_material_settings
|
|
The full name was "Topology Slide/Relax", but it didn't fit in the
toolbar UI. This was causing some problems:
- The mesh filter that does the same thing is called "Relax"
- We may want to add a "Topology Brush" tool in the future that is more
oriented to retopology task (like creating strips of quads), so by doing
this we avoid having two tools with the same name in the UI.
Reviewed By: billreynish
Differential Revision: https://developer.blender.org/D6590
|
|
This commits introduces the pose_ik_segments brush property in the Pose Brush. When increasing the IK segments count, the brush generates more segments and weights associations following the topology of the mesh. When moving the brush, these segments are transformed using an IK solver and they are used to deform the mesh.
When pressing Ctrl, the brush controls the segments' roll rotation instead of using the IK solver. The brush falloff controls how much rotation is propagated from the first to the last segment in the chain.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6389
|
|
Previously the alpha was hardcoded to 0.7. Now it is possible to control
the cursor alpha by changing the alpha color of the cursor color
property. New alpha default is 0.9. This, with the new saturated colors,
should make the cursor more visible on highdpi screens.
I also removed the cache location preview as it is too visible right now
with the new alpha and color values.
Reviewed By: billreynish
Differential Revision: https://developer.blender.org/D6433
|
|
The previous cursor colors were chosen to match the toolbar icon color,
but the contrast on top of the default matcaps was not enough. This
commit uses more saturated colors, which are more visible on top of the
default matcaps.
Reviewed By: jbakker, billreynish
Differential Revision: https://developer.blender.org/D6194
|
|
Updated defaults and pressure/size curves for the Clay brush.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6298
|