Age | Commit message (Collapse) | Author |
|
Also remove the code in the ghash that is no longer used.
This change simplifies the existing code.
Differential Revision: https://developer.blender.org/D8219
|
|
|
|
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
|
|
|
|
While it might be handy to have type-less functionality which is
similar to how C++ math is implemented it can not be easily achieved
with just preprocessor in a way which does not have side-effects on
wrong usage.
There macros where often used on a non-trivial expression, and there
was at least one usage where it was causing an actual side effect/bug
on Windows (see change around square_f(sh[index++]) in studiolight.c).
For such cases it is handy to have a function which is guaranteed to
have zero side-effects. The motivation behind actually removing the
macros is that there is already a way to do similar calculation. Also,
not having such macros is a way to guarantee that its usage is not
changed in a way which have side-effects and that it's not used as an
inspiration for cases where it should not be used.
Differential Revision: https://developer.blender.org/D7051
|
|
As explained in T65568 by @LucaRood, the self collision system should exclude triangles that are connected by sewing springs.
Differential Revision: https://developer.blender.org/D6911
|
|
15% to 20% improvement in cloth simulation performance with
self-collision.
The idea is to reduce the number of collisions computed by avoiding
overlapping tris with the same combination (eg. (1,0) and (0,1)).
Reviewed By: zeddb
Differential Revision: https://developer.blender.org/D6474
|
|
This integrates hair collisions with the new cloth collision system,
greatly improving reliability, and reducing the amount of hair-specific
code paths in the cloth code.
The removes all the point constraint based collision stuff, instead
implementing segment impulse based collisions, using the same collision
response code as the normal cloth solver.
The hair system can now also collide with the emitter if it is a
collision object.
Reviewed By: mano-wii, Sebastian Parborg
Differential Revision: https://developer.blender.org/D6545
|
|
An optimisation in the collision system for cloth (static collisions),
broke the particle collisions, as they take motion into account. This
restores the moving BVH required for the particle collisions, while
keeping the optimisation for the cloth collisions.
Reviewed By: mano-wii
Maniphest Tasks: T71620
Differential Revision: https://developer.blender.org/D6560
|
|
|
|
When the result isn't used, prefer post increment/decrement
(already used nearly everywhere in Blender).
|
|
TLS and Settings can be used by other types of parallel 'for loops', so
removing 'Range' from their names.
No functional changes expected here.
|
|
|
|
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Not only were those often making doublons with already existing
BLI_math's stuff, but they were also used to hide implicit type
conversions...
As usual this adds some more exotic inlined vector functions (one of
the rare cases where I really miss C++ and its templates... ;) ).
|
|
Needed for clang formatting to workaround bug/limit, see: T53211
|
|
No apparent difference in a quick simulation, but was clearly wrong.
|
|
Reviewers: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D3802
|
|
algorith.
In my tests a 4% improvement in performance was achieved by simulating a square cloth over the cube.
|
|
This commit includes several performance, stability, and reliability
improvements to cloth collisions.
Most notably:
* The implementation of a new self-collisions system.
* Multithreading of collision detection.
* Implementation of single sided collisions and normal overrides.
* Replacement of the `plNearestPoints` function from Bullet with a
dedicated solution.
Further, this also includes several bug fixes, and algorithmic
improvements.
Reviewed By: brecht
Differential Revision: http://developer.blender.org/D3712
|
|
This reorganizes the cloth UI, and changes some of the behaviour to be
more reasonable.
Changes included here:
* Reorganized cloth panels
* Improved some tooltips
* Removed `vel_damping` option
* Removed cloth pinning checkbox
* Removed stiffness scaling checkbox
* Separated shrinking from sewing
* Separated self collisions from object collisions
Reviewed By: brecht
Differential Revision: http://developer.blender.org/D3691
|
|
Conflicts:
source/blender/blenkernel/intern/collision.c
|
|
objects to test against.
Followup to rBc6bbe6c5aac29, much more elegant solution to the problem. ;)
|
|
|
|
Not freeing its BVHTree in case there were no collision objects,
could quickly lead to hundreds of MB of memleak!
|
|
|
|
Because looping over the scene is unsafe and slow.
|
|
|
|
Only enabled objects in the view layer should be used, while temporarily
hidden objects should still have an effect.
|
|
|
|
Same reasoning as effector relations in earlier commit.
|
|
|
|
|
|
|
|
OVERVIEW
* In 2.7 terminology, all layers and groups are now collection datablocks.
* These collections are nestable, linkable, instanceable, overrideable, ..
which opens up new ways to set up scenes and link + override data.
* Viewport/render visibility and selectability are now a part of the collection
and shared across all view layers and linkable.
* View layers define which subset of the scene collection hierarchy is excluded
for each. For many workflows one view layer can be used, these are more of an
advanced feature now.
OUTLINER
* The outliner now has a "View Layer" display mode instead of "Collections",
which can display the collections and/or objects in the view layer.
* In this display mode, collections can be excluded with the right click menu.
These will then be greyed out and their objects will be excluded.
* To view collections not linked to any scene, the "Blender File" display mode
can be used, with the new filtering option to just see Colleciton datablocks.
* The outliner right click menus for collections and objects were reorganized.
* Drag and drop still needs to be improved. Like before, dragging the icon or
text gives different results, we'll unify this later.
LINKING AND OVERRIDES
* Collections can now be linked into the scene without creating an instance,
with the link/append operator or from the collections view in the outliner.
* Collections can get static overrides with the right click menu in the outliner,
but this is rather unreliable and not clearly communicated at the moment.
* We still need to improve the make override operator to turn collection instances
into collections with overrides directly in the scene.
PERFORMANCE
* We tried to make performance not worse than before and improve it in some
cases. The main thing that's still a bit slower is multiple scenes, we have to
change the layer syncing to only updated affected scenes.
* Collections keep a list of their parent collections for faster incremental
updates in syncing and caching.
* View layer bases are now in a object -> base hash to avoid quadratic time
lookups internally and in API functions like visible_get().
VERSIONING
* Compatibility with 2.7 files should be improved due to the new visibility
controls. Of course users may not want to set up their scenes differently
now to avoid having separate layers and groups.
* Compatibility with 2.8 is mostly there, and was tested on Eevee demo and Hero
files. There's a few things which are know to be not quite compatible, like
nested layer collections inside groups.
* The versioning code for 2.8 files is quite complicated, and isolated behind
#ifdef so it can be removed at the end of the release cycle.
KNOWN ISSUES
* The G-key group operators in the 3D viewport were left mostly as is, they
need to be modified still to fit better.
* Same for the groups panel in the object properties. This needs to be updated
still, or perhaps replaced by something better.
* Collections must all have a unique name. Less restrictive namespacing is to
be done later, we'll have to see how important this is as all objects within
the collections must also have a unique name anyway.
* Full scene copy and delete scene are exactly doing the right thing yet.
Differential Revision: https://developer.blender.org/D3383
https://code.blender.org/2018/05/collections-and-groups/
|
|
|
|
Tabs in middle of code (mostly for no reason / by accident).
|
|
- put render iterator in own scope
(would shadow it's own variable if used multiple times).
- enforce semicolon at end of iterator macros.
- no need to typedef one-off macro structs.
|
|
|
|
|
|
|
|
Since we are ditching layers from Blender (2.8) we need a replacement to
control groups visibility. This commit introduces collections as the building
blocks for groups, allowing users to control visibility as well as overrides
for groups.
Features
========
* Groups now have collections
This way you can change the visibility of a collection inside a group, and add
overrides which are part of the group and are prioritized over other overrides.
* Outliner
Groups can inspect their collections, change visibility, and add/remove members.
To change an override of a group collection, you need to select an instance of
the group, and then you can choose "group" in the collection properties editor
to edit this group active collection instead of the view layer one.
* Dupli groups overrides
We can now have multiple instances of the same group with an original "override"
and different overrides depending on the collection the instanced object is part
of.
Technical
=========
* Layers
We use the same api for groups and scene as much as possible.
Reviewers: sergey (depsgraph), mont29 (read/write and user count)
Differential Revision: https://developer.blender.org/D2892
|
|
|
|
|