Age | Commit message (Collapse) | Author |
|
- Remove "take ownership" argument which was confusing and always true
- The argument made ownership very confusing
- Better to avoid boolean arguments that switch a function's purpose
- Remove "mask" argument which was basically wrong and not used properly
- "EVERYTHING" was used because developers are wary of removing data
- Instead use `CD_MASK_MESH` for its purpose of original mesh data
- Remove use of shallow copied temporary mesh, which is unnecessary now
- Split shape key processing into separate functions and use C++ types
- Copy fields explicitly rather than using memcpy for the whole struct
- Use higher level functions and avoid redundant code
- The whole idea is pretty simple and can be built from standard logic
- Adjust `CustomData` logic to be consistent with "assign" expectations
- Clear the layer data from the source, and moves the anonymous ID
Differential Revision: https://developer.blender.org/D15857
|
|
owner_id pointer.
Also rename the callback. That way, we can keep moving toward a more
generic handling of those embedded IDs (think e.g. about copy code).
|
|
Use `verts` instead of `vertices` and `polys` instead of `polygons`
in the API added in 05952aa94d33eeb50. This aligns better with
existing naming where the shorter names are much more common.
|
|
Now that all embedded IDs have a loopback pointer to their owner, we do
need anymore extra parameters for this accessor.
|
|
Simplify and make more efficients checks in collection one (missed
these in yesterday's commit rBcd49fee74114), add some to ShapeKey's one.
|
|
For copy-on-write, we want to share attribute arrays between meshes
where possible. Mutable pointers like `Mesh.mvert` make that difficult
by making ownership vague. They also make code more complex by adding
redundancy.
The simplest solution is just removing them and retrieving layers from
`CustomData` as needed. Similar changes have already been applied to
curves and point clouds (e9f82d3dc7ee, 410a6efb747f). Removing use of
the pointers generally makes code more obvious and more reusable.
Mesh data is now accessed with a C++ API (`Mesh::edges()` or
`Mesh::edges_for_write()`), and a C API (`BKE_mesh_edges(mesh)`).
The CoW changes this commit makes possible are described in T95845
and T95842, and started in D14139 and D14140. The change also simplifies
the ongoing mesh struct-of-array refactors from T95965.
**RNA/Python Access Performance**
Theoretically, accessing mesh elements with the RNA API may become
slower, since the layer needs to be found on every random access.
However, overhead is already high enough that this doesn't make a
noticible differenc, and performance is actually improved in some
cases. Random access can be up to 10% faster, but other situations
might be a bit slower. Generally using `foreach_get/set` are the best
way to improve performance. See the differential revision for more
discussion about Python performance.
Cycles has been updated to use raw pointers and the internal Blender
mesh types, mostly because there is no sense in having this overhead
when it's already compiled with Blender. In my tests this roughly
halves the Cycles mesh creation time (0.19s to 0.10s for a 1 million
face grid).
Differential Revision: https://developer.blender.org/D15488
|
|
In some cases, there is a chance code already knows who might be the
owner of the given ID, in which case it can be more efficient to check
it first (especially in cases like embedded node trees or scene
collections, where the only other way is to loop over all possible
owners currently).
Will be used in next commit in some Outliner fix.
|
|
NOTE: This is committed to the 3.3 branch as part of D15606, which we
decided should go to this release still (by Bastien, Dalai and me). That
is because these are important usability fixes/improvements to have for
the LTS release.
Adds `rna_path.cc` and `RNA_path.h`.
`rna_access.c` is a quite big file, which makes it rather hard and
inconvenient to navigate. RNA path functions form a nicely coherent unit
that can stand well on it's own, so it makes sense to split them off to
mitigate the problem. Moreover, I was looking into refactoring the quite
convoluted/overloaded `rna_path_parse()`, and found that some C++
features may help greatly with that. So having that code compile in C++
would be helpful to attempt that.
Differential Revision: https://developer.blender.org/D15540
Reviewed by: Brecht Van Lommel, Campbell Barton, Bastien Montagne
|
|
Adds a new option to the 'Delete ShpaKeys' operator, which first applies
the current mix to the object data, before removing all shapekeys.
Request from @JulienKaspar from Blender studio.
Reviewed By: JulienKaspar
Differential Revision: https://developer.blender.org/D15443
|
|
Some ID types did not have a filter value, even though they would be
used in remapping code, leading to missing remappings. In that specific
case, shape keys would actually never be properly remapped.
Reproducible in r1230 of
`Heist/pro/animation_test/einar/einar_new_expression_shapes2.blend`,
|
|
|
|
|
|
Caused by not using the proper duplicated `MVert` array.
Error in b0aaf6ff4a9731e9142d8.
|
|
A mistake in the mesh normal refactor caused the wrong mesh to
be used when calculating normals with a shape key's deformation.
This commit fixes the normal calculation by using the correct mesh,
with just adjusted vertex positions, and calculating the results
directly into the result arrays when possible. This completely avoids
the need to make a local copy of the mesh, which makes sense,
since the only thing that changes is the vertex positions.
Differential Revision: https://developer.blender.org/D14317
|
|
So far it was needed to declare a new RNA struct to `RNA_access.h` manually.
Since 9b298cf3dbec we generate a `RNA_prototypes.h` for RNA property
declarations. Now this also includes the RNA struct declarations, so they don't
have to be added manually anymore.
Differential Revision: https://developer.blender.org/D13862
Reviewed by: brecht, campbellbarton
|
|
|
|
This commit renames enums related the "Curve" object type and ID type
to add `_LEGACY` to the end. The idea is to make our aspirations clearer
in the code and to avoid ambiguities between `CURVE` and `CURVES`.
Ref T95355
To summarize for the record, the plans are:
- In the short/medium term, replace the `Curve` object data type with
`Curves`
- In the longer term (no immediate plans), use a proper data block for
3D text and surfaces.
Differential Revision: https://developer.blender.org/D14114
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
As described in T91186, this commit moves mesh vertex normals into a
contiguous array of float vectors in a custom data layer, how face
normals are currently stored.
The main interface is documented in `BKE_mesh.h`. Vertex and face
normals are now calculated on-demand and cached, retrieved with an
"ensure" function. Since the logical state of a mesh is now "has
normals when necessary", they can be retrieved from a `const` mesh.
The goal is to use on-demand calculation for all derived data, but
leave room for eager calculation for performance purposes (modifier
evaluation is threaded, but viewport data generation is not).
**Benefits**
This moves us closer to a SoA approach rather than the current AoS
paradigm. Accessing a contiguous `float3` is much more efficient than
retrieving data from a larger struct. The memory requirements for
accessing only normals or vertex locations are smaller, and at the
cost of more memory usage for just normals, they now don't have to
be converted between float and short, which also simplifies code
In the future, the remaining items can be removed from `MVert`,
leaving only `float3`, which has similar benefits (see T93602).
Removing the combination of derived and original data makes it
conceptually simpler to only calculate normals when necessary.
This is especially important now that we have more opportunities
for temporary meshes in geometry nodes.
**Performance**
In addition to the theoretical future performance improvements by
making `MVert == float3`, I've done some basic performance testing
on this patch directly. The data is fairly rough, but it gives an idea
about where things stand generally.
- Mesh line primitive 4m Verts: 1.16x faster (36 -> 31 ms),
showing that accessing just `MVert` is now more efficient.
- Spring Splash Screen: 1.03-1.06 -> 1.06-1.11 FPS, a very slight
change that at least shows there is no regression.
- Sprite Fright Snail Smoosh: 3.30-3.40 -> 3.42-3.50 FPS, a small
but observable speedup.
- Set Position Node with Scaled Normal: 1.36x faster (53 -> 39 ms),
shows that using normals in geometry nodes is faster.
- Normal Calculation 1.6m Vert Cube: 1.19x faster (25 -> 21 ms),
shows that calculating normals is slightly faster now.
- File Size of 1.6m Vert Cube: 1.03x smaller (214.7 -> 208.4 MB),
Normals are not saved in files, which can help with large meshes.
As for memory usage, it may be slightly more in some cases, but
I didn't observe any difference in the production files I tested.
**Tests**
Some modifiers and cycles test results need to be updated with this
commit, for two reasons:
- The subdivision surface modifier is not responsible for calculating
normals anymore. In master, the modifier creates different normals
than the result of the `Mesh` normal calculation, so this is a bug
fix.
- There are small differences in the results of some modifiers that
use normals because they are not converted to and from `short`
anymore.
**Future improvements**
- Remove `ModifierTypeInfo::dependsOnNormals`. Code in each modifier
already retrieves normals if they are needed anyway.
- Copy normals as part of a better CoW system for attributes.
- Make more areas use lazy instead of eager normal calculation.
- Remove `BKE_mesh_normals_tag_dirty` in more places since that is
now the default state of a new mesh.
- Possibly apply a similar change to derived face corner normals.
Differential Revision: https://developer.blender.org/D12770
|
|
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
- Minor improvements to doc-strings.
Ref T92709
|
|
The main goal of this refactor is to make BPath module use `IDTypeInfo`,
and move each ID-specific part of the `foreach_path` looper into their
own IDTypeInfo struct, using a new `foreach_path` callback.
Additionally, following improvements/cleanups are included:
* Attempt to get better, more consistent namings.
** In particular, move from `path_visitor` to more standard `foreach_path`.
* Update and extend documentation.
** API doc was moved to header, according to recent discussions on this
topic.
* Remove `BKE_bpath_relocate_visitor` from API, this is specific
callback that belongs in `lib_id.c` user code.
NOTE: This commit is expected to be 100% non-behavioral-change. This
implies that several potential further changes were only noted as
comments (like using a more generic solution for
`lib_id_library_local_paths`, addressing inconsistencies like path of
packed libraries always being skipped, regardless of the
`BKE_BPATH_FOREACH_PATH_SKIP_PACKED` `eBPathForeachFlag` flag value,
etc.).
NOTE: basic unittests were added to master already in
rBdcc500e5a265093bc9cc.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13381
|
|
Two issues addressed here:
I) `asset_type_info` is sub-data, not a callback. Therefore, move it
before the callbacks in the `IDTypeInfo` struct.
II) More important, initialize this new attribute in *ALL* `IDTypeInfo`
instances. No member of this struct should ever be left implicitely
uninitilazed, ever.
Aftermath of rBa84f1c02d251.
|
|
|
|
This flag became a full duplicate of `IDTYPE_FLAGS_NO_LIBLINKING`, which
is a good thing (don't think we ever want to be able to link some data,
without being able to make it local...).
So we can now remove it and use `IDTYPE_FLAGS_NO_LIBLINKING` instead.
|
|
Avoid API misuse that caused leaks in T90791 &
2788b0261cb7d33a2f6f2978ff4f55bb4987edae.
|
|
callbacks.
This was not really useful, and added estra useless steps in case and ID
should not actually be written.
Further more, it prevented clearing the usercount on write, which can be
cause a false positive 'chanhged' detection in undo/redo case.
|
|
Remove the 'only_face_normals' argument.
- BKE_mesh_calc_normals_poly for polygon normals.
- BKE_mesh_calc_normals_poly_and_vertex for poly and vertex normals.
Order arguments logically:
- Pair array and length arguments.
- Position normal array arguments (to be filled) last.
|
|
This shows the text as part of the assertion message.
|
|
This commit moves the storage of `bDeformGroup` and the active index
to `Mesh`, `Lattice`, and `bGPdata` instead of `Object`. Utility
functions are added to allow easy access to the vertex groups given
an object or an ID.
As explained in T88951, the list of vertex group names is currently
stored separately per object, even though vertex group data is stored
on the geometry. This tends to complicate code and cause bugs,
especially as geometry is created procedurally and tied less closely
to an object.
The "Copy Vertex Groups to Linked" operator is removed, since they
are stored on the geometry anyway.
This patch leaves the object-level python API for vertex groups in
place. Creating a geometry-level RNA API can be a separate step;
the changes in this commit are invasive enough as it is.
Note that opening a file saved in 3.0 in an earlier version means
the vertex groups will not be available.
Differential Revision: https://developer.blender.org/D11689
|
|
|
|
|
|
Even though shepkeys are not strictly speaking an embedded data, they
share quiet a few points with those, and from liboverride perspective
they are embedded, so...
|
|
This concerns currently only collections (`master_collection` of scenes)
and root node trees. It removes the matching type-specific helpers
(`BKE_collection_master_scene_search` and `BKE_node_tree_find_owner_ID`).
No functional change expected here.
NOTE: Current implementation of `owner_get` is far from optimal, we
could probably do it better, see {T69169}.
NOTE: While it could also have it, shapekeys IDTypeInfo was left out of
this change for now. Mainly because it sould not be used currently, and
we ultimately want to demote shape keys from ID status anyway.
|
|
Currently this is needed to properly tag PointCache's for info update
(fixes an issue reported in T82503).
Suspect we may need this in more cases in the future though, RNA
assign/update processes are not always 100% enough to deal with
complicated corner cases.
|
|
This commit removes geometry from meshes and shapekeys, and embedded
files, from liboverride IDs.
This data is never overrideable, there is no reason to store extra
useless copies of it in production files.
See T78944.
Note that we may add more data to be skipped on write for liboverrides
in the future, but this commit should address all the most important
cases already.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D9810
|
|
|
|
memfile undos
This is essentially adding that new callback, and using it only for already
existing Scene's 3DCursor.
Note that the place where this is called has been moved again, after all
have been lib-linked, such that those callbacks may also work on ID pointers.
Maniphest Tasks: T71759
Differential Revision: https://developer.blender.org/D9237
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
Once again, no behavioral change expected here.
|
|
Better use higher-level code from common ID management when possible.
Helps to de-duplicate logic, and reduces outside usages of more
'dangerous' functions.
Note that we could get rid of many of those `BKE_<id_type>_add`
functions now, but on the other hand several of those take extra
parameters and perform additional actions, so think we can keep them all
for now as 'non-standard ID specific creation functions'.
|
|
Those were only shallow wrappers around `BKE_id_copy`, barely used (even
fully unused in some cases), and we want to get rid of those ID-specific
helpers for the common ID management tasks. Also prevents weird custom
behaviors (like `BKE_object_copy`, who was the only basic ID copy
function to reset user count of the new copy to zero).
Part of 71219.
|
|
No reasons to keep the new ID pointer as parameter here.
Part of T71219.
|
|
|
|
|
|
This is part of T76372.
It adds the `blend_write`, `blend_read_data`, `blend_read_lib`
and `blend_read_expand` which correspond to the various
steps when reading and writing .blend files.
Having these callbacks allows us to decentralize the blenloader
code a lot more. This has the affect that code related to any
specific ID type is less scattered.
Reviewers: mont29
Differential Revision: https://developer.blender.org/D8670
|
|
Also order sizeof(..) first to promote other values to size_t.
|
|
D8367 by @paul2t with edits.
|
|
Clang Tidy reported a couple of false positives. I disabled
those `NOLINTNEXTLINE`.
Differential Revision: https://developer.blender.org/D8199
|
|
|
|
The `BKE_animsys.h` and `anim_sys.c` files already had a an "AnimData
API" section. The code in that section has now been split off, and
placed into `BKE_anim_data.h` and `anim_data.c`.
All files that used to include `BKE_animsys.h` have been adjusted to
only include the animation headers they need (sometimes none).
No functional changes.
|