| Age | Commit message (Collapse) | Author |
|---|
|
It was rather a huge chunk of code, which started to become
more harder to maintain with the transition to OpenSubdiv based
implementation. Because of this transition, the compatibility was
also rather on a poor side.
Remove compatibility support for pre-2.50.9 multires.
Ref T77107
Reviewed By: brecht, mont29
Differential Revision: https://developer.blender.org/D9238
|
|
Corrects incorrect usages of the words 'then' and 'than'.
Differential Revision: https://developer.blender.org/D9246
Reviewed by Campbell Barton
|
|
Better use higher-level code from common ID management when possible.
Helps to de-duplicate logic, and reduces outside usages of more
'dangerous' functions.
Note that we could get rid of many of those `BKE_<id_type>_add`
functions now, but on the other hand several of those take extra
parameters and perform additional actions, so think we can keep them all
for now as 'non-standard ID specific creation functions'.
|
|
Those were only shallow wrappers around `BKE_id_copy`, barely used (even
fully unused in some cases), and we want to get rid of those ID-specific
helpers for the common ID management tasks. Also prevents weird custom
behaviors (like `BKE_object_copy`, who was the only basic ID copy
function to reset user count of the new copy to zero).
Part of 71219.
|
|
No reasons to keep the new ID pointer as parameter here.
Part of T71219.
|
|
Note that possibility to pass the new ID pointer as parameter was kept,
as this is needed for some rather specific cases (like in depsgraph/COW,
when copying into already allocated memory).
Part of T71219.
|
|
Add a specific flag for nodetree deep-copy special localization code.
And add a new `LIB_ID_CREATE_LOCALIZE` flag, similar to
`LIB_ID_COPY_LOCALIZE`, for creation purposes.
No behavioral changes expected here.
|
|
Cleanup old tracker task format to the new. e.g: [#34039] to T34039
Ref D8718
|
|
face_set_color_default was not copied when copying meshes, so when
extracting the colors in the draw cache it was using a wrong default
color ID.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8957
|
|
Originally was noticed when transforming mesh created by
object.to_mesh() from an object without modifier, in which case the
result references CustomData layers used by the object itself.
The issue goes a bit deeper: mesh.transform() should never modify
referenced layers, hence it should duplicate referenced layers.
This fix changes one specific aspect of the reported behavior. The
case where vertices coordinates are modified manually will still have
affect on the source mesh (as no referenced CustomData layers are being
duplicated). Proper fix for this case is not yet clear to me.
Differential Revision: https://developer.blender.org/D8939
|
|
These were leftovers from the BGE removal.
Differential Revision: https://developer.blender.org/D8862
|
|
Regression in a48d78ce07f4f which caused the meshes CustomData
to be written before it's layer values were updated for writing.
|
|
|
|
I'm also adding `BKE_id_blend_write`, so that it can be accessed
outside of `readfile.c`.
|
|
This is part of T76372.
It adds the `blend_write`, `blend_read_data`, `blend_read_lib`
and `blend_read_expand` which correspond to the various
steps when reading and writing .blend files.
Having these callbacks allows us to decentralize the blenloader
code a lot more. This has the affect that code related to any
specific ID type is less scattered.
Reviewers: mont29
Differential Revision: https://developer.blender.org/D8670
|
|
|
|
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/blenkernel` module.
No functional changes.
|
|
Also order return matrices last.
|
|
Also order return matrices last.
|
|
|
|
This resolves a performance regression in 2.8x where every edit-mode
update performed an edit-mesh to mesh conversion.
Now the conversion will be lazily initialized if/when it's required.
New BKE_mesh_wrapper_* functions abstract over mesh data access.
Currently only edit-mesh and regular meshes are supported.
In the future sub-surface meshes may be supported too.
|
|
|
|
|
|
The `BKE_animsys.h` and `anim_sys.c` files already had a an "AnimData
API" section. The code in that section has now been split off, and
placed into `BKE_anim_data.h` and `anim_data.c`.
All files that used to include `BKE_animsys.h` have been adjusted to
only include the animation headers they need (sometimes none).
No functional changes.
|
|
Mpving utils from idcode to idtype proved to be somewhat painful for
some reasons, but now all looks good.
Had to add a fake/empty shell for the special snowflake too,
`ID_LINK_PLACEHOLDER/INDEX_ID_NULL`...
|
|
|
|
|
|
Make it explicit this data mask is added to the default mask.
|
|
This has been long standing TODO...
Note that remaining usages of BKE_xxx_delete should all be carefully
checked for and utilmately nuked in favor of `BKE_id_delete()`, think we
still have quiet a few bugs hidden in those (code seems to usually
assume those functions do a full ID deletion, which is not the case).
|
|
While it might be handy to have type-less functionality which is
similar to how C++ math is implemented it can not be easily achieved
with just preprocessor in a way which does not have side-effects on
wrong usage.
There macros where often used on a non-trivial expression, and there
was at least one usage where it was causing an actual side effect/bug
on Windows (see change around square_f(sh[index++]) in studiolight.c).
For such cases it is handy to have a function which is guaranteed to
have zero side-effects. The motivation behind actually removing the
macros is that there is already a way to do similar calculation. Also,
not having such macros is a way to guarantee that its usage is not
changed in a way which have side-effects and that it's not used as an
inspiration for cases where it should not be used.
Differential Revision: https://developer.blender.org/D7051
|
|
|
|
Face Sets are the new system to control the visibility state of the mesh in sculpt and paint modes. They are designed to work in modes where brushes are the primary way of interaction and they provide much more control when working with meshes with complex shapes and overlapping surfaces.
This initial commit includes:
- Sculpt Face Sets data structures and PBVH rendering.
- Face Set overlay and opacity controls.
- Sculpt Undo support.
- Remesher reprojection support. The visibility state of the mesh is also preserved when remeshing.
- Automasking and Mesh filter support.
- Mask expand operator mode to expand Face Sets (Shift + W) and flood fill areas by connectivity (press Ctrl while expanding).
- Sculpt Mode Face Sets and Visibility API.
- Sculpt Face Sets creation and visibility management operators.
- Operator to randomize the Face Sets colors.
- Draw Face Sets brush tool to create and edit the Face Sets. Drawing on the mesh creates a new Face Set. Pressing Ctrl before drawing modifies the Face Set under the brush at the beginning of the stroke.
- Updated keymap and menu to work with Face Sets from Sculpt Mode (H to toggle visibility, Alt + H to show all, Shit + H to hide).
- Pie menu on the W key with Face common Sets operations.
Know limitations:
- Multires support. The Face Sets and Visibility API needs to be implemented for Multires.
Reviewed By: jbakker, #user_interface, Severin
Differential Revision: https://developer.blender.org/D6070
|
|
Instead of using anonymous booleans flags, also allows to keep the same
behavior in all cases, without needing special handling from calling
code for our beloved oddballs object proxies...
|
|
This info is now stored in ID tags themselves, so no need to pass an
extra anonymous boolean parameter around, yay!
|
|
Also removed some only used locally from the header, `BKE_lib_id.h`
is already way too big, no need to overload it with unused things.
|
|
Once again those crappy weirdos IDs with their crappy weirdos 'loopback'
pointers...
This is a quick hack for now, think id_copy needs to be reworked a bit
to supported re-entrant sub-ID copying (also an issue with nodes I bet).
|
|
Note that `BKE_library.h`/`library.c` were renamed to
`BKE_lib_id.h`/`lib_id.c` to avoid having a too generic name here.
Part of T72604.
|
|
- Replace 'unsigned' used on it's own with 'uint'.
- Replace 'unsigned const char' with 'const uchar'.
|
|
Old Name New Name
========= =========
init_def_material BKE_materials_init
BKE_material_gpencil_default_free BKE_materials_exit
test_object_materials BKE_object_materials_test
test_all_objects_materials BKE_objects_materials_test_all
give_matarar BKE_object_material_array
give_totcolp BKE_object_material_num
give_current_material_p BKE_object_material_get_p
give_current_material BKE_object_material_get
assign_material BKE_object_material_assign
assign_matarar BKE_object_material_array_assign
give_matarar_id BKE_id_material_array
give_totcolp_id BKE_id_material_num
assign_material_id BKE_id_material_assign
clear_matcopybuf BKE_material_copybuf_clear
free_matcopybuf BKE_material_copybuf_free
copy_matcopybuf BKE_material_copybuf_copy
paste_matcopybuf BKE_material_copybuf_paste
BKE_material_init_gpencil_settings BKE_gpencil_material_attr_init
BKE_material_add_gpencil BKE_gpencil_material_add
BKE_material_gpencil_get BKE_gpencil_material
BKE_material_gpencil_default_get BKE_gpencil_material_default
BKE_material_gpencil_settings_get BKE_gpencil_material_settings
|
|
This commit enables OpenVDB adaptivity in the voxel remesher. It can be useful to reduce the polygon count if you want to switch to dyntopo after using the voxel remesher workflow.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5918
|
|
Modifier stack evaluation would copy mesh settings other than mesh topology
automatically, outside of the individual modifier evaluation. This leads to hard
to understand code, and makes it unclear which settings are available in following
modifiers, and which only after the entire stack is evaluated.
Now every modifier is responsible to ensure the mesh it outputs preserves materials,
texture space and other settings, or alters them as needed.
Fixes T64739: incorrect texture space for various modifiers
Differential Revision: https://developer.blender.org/D5808
|
|
|
|
These were only strictly valid for texture space calculation, don't store them
since they should not be used after that. Only store a flag to indicate if the
auto texture space has been evaluated.
In the future it might make sense to store bounding boxes at the mesh level to
speed up bounding box computation for multiple objects using the same mesh, but
then it will need to be implemented differently.
|
|
space issues"
This reverts commit e7a514369fe700dcc5a1fe433c8f709ed9595ded, it introduces
a bug in selection in edit mode.
Fixes T70103: can't select extruded Vertex
Ref T64739
|
|
From rBe7a514369fe70, since I did not have time to do proper review
in D5808...
Note that we could also consider that shallow copy of src should never
be dst of that function and add some asserts instead. For now going the
safest and simplest way though.
|
|
Modifier stack evaluation would copy mesh settings other than mesh topology
automatically, outside of the individual modifier evaluation. This leads to hard
to understand code, and makes it unclear which settings are available in following
modifiers, and which only after the entire stack is evaluated.
Now every modifier is responsible to ensure the mesh it outputs preserves materials,
texture space and other settings, or alters them as needed.
Fixes T64739: incorrect texture space for various modifiers
Differential Revision: https://developer.blender.org/D5808
|
|
Make a distinction between flush sculpt changes for rendering, and forcing
sculpt data structures to be rebuilt after mesh changes. Also don't use PBVH
for renders.
|
|
|
|
This reduce memory usage by about 25% in object mode for multires meshes.
|
