| Age | Commit message (Collapse) | Author |
|---|
|
|
|
`BKE_object_get_evaluated_mesh` now looks inside `geometry_set_eval`.
|
|
Conflicts:
source/blender/blenkernel/intern/lib_override.c
|
|
In some cases (when there is an evaluated curve), the conversion code
would try to free the evaluated data-block twice, because freeing the
object would free it from `data_eval` and then the data-block was freed
again explicitly. Now check if the data-block is stored in `data_eval`
before freeing `object.data` manually. This is another area that's made
more complex by the fact that we change the meaning of `object.data`
for evaluated objects. The solution is more complicated than it should
be, but it works whether or not an evaluated mesh or curve exists.
|
|
Headers should only include other headers when absolutely necessary,
to avoid unnecessary dependencies and increasing compile times.
To make this change simpler, three DerivedMesh functions with a single
use were removed.
|
|
Similar to cf69652618fefcd22b2cde9a2.
|
|
Implementing removal of anonymous attributes with `GeometryComponent`
instead of `Mesh` makes it more reusable for other types like curves.
|
|
This is mostly a cleanup to avoid hardcoding the eager calculation of
normals it isn't necessary, by reducing calls to `BKE_mesh_calc_normals`
and by removing calls to `BKE_mesh_normals_tag_dirty` when the mesh
is newly created and already has dirty normals anyway. This reduces
boilerplate code and makes the "dirty by default" state more clear.
Any regressions from this commit should be easy to fix, though the
lazy calculation is solid enough that none are expected.
|
|
This commit changes the Curve to Mesh node to work with `Curves`
instead of `CurveEval`. The change ends up basically completely
rewriting the node, since the different attribute storage means that
the decisions made previously don't make much sense anymore.
The main loops are now "for each attribute: for each curve combination"
rather than the other way around, with the goal of taking advantage
of the locality of curve attributes. This improvement is quite
noticeable with many small curves; I measured a 4-5x improvement
(around 4-5s to <1s) when converting millions of curves to tens of
millions of faces. I didn't obverse any change in performance compared
to 3.1 with fewer curves though.
The changes also solve an algorithmic flaw where any interpolated
attributes would be evaluated for every curve combination instead
of just once per curve. This can be a large improvement when there
are many profile curves.
The code relies heavily on a function `foreach_curve_combination`
which calculates some basic information about each combination and
calls a templated function. I made assumptions about unnecessary reads
being removed by compiler optimizations. For further performance
improvements in the future that might be an area to investigate.
Another might be using a "for a group of curves: for each attribute:
for each curve" pattern to increase the locality of memory access.
Differential Revision: https://developer.blender.org/D14642
|
|
Caused by previous DNA change.
|
|
Solves compilation warning with Clang, and moves manipulation with
DNA structures to the designed way for C++.
The tests and few other places are update to the new code by Jacques.
Ref T96847
Maniphest Tasks: T96847
Differential Revision: https://developer.blender.org/D14625
|
|
Avoids duplication of type which previously was specified twice in a line.
|
|
Replaces old-style memzero-style of call with zero-initializer.
Allows to shorten typical initialization code to a single line:
Object foo = blender::dna::shallow_zero_initialize<Object>()
This will allow to more easily convert designated initializer
which is often used to fill object with zeroes to the explicit
function calls:
MyDNAStruct foo = {};
will be translated to
MyDNAStruct foo = blender::dna::shallow_zero_initialize<MyDNAStruct>();
Differential Revision: https://developer.blender.org/D14486
|
|
Use shallow_copy, no need in copy_memory.
The latter appeared as some last minute solution for a compilation
warning on Friday.
|
|
Crashed e.g. FBX exporter.
Mistake in rB0c33e84020deca.
|
|
Thanks Jacques for finding solution for deprecation warning
which was generated by GCC for constructor.
The rest of the change is related on fixing memaccess warning
which was happening when memset/memcpy was used directly on
the DNA object pointer. Now there are two utility functions
for this:
- blender::dna::zero_memory
- blender::dna::copy_memory
|
|
This change makes it possible to add implementation of common
C++ methods for DNA structures which helps ensuring unsafe
operations like shallow copy are done explicitly.
For example, creating a shallow copy used to be:
Object temp_object = *input_object;
In the C++ context it was seen like the temp_object is
properly decoupled from the input object, while in the
reality is it not. Now this code becomes:
Object temp_object = blender::dna::shallow_copy(*input_object);
The copy and move constructor and assignment operators are
now explicitly disabled.
Other than a more explicit resource management this change
also solves a lot of warnings generated by the implicitly
defined copy constructors w.r.t dealing with deprecated fields.
These warnings were generated by Apple Clang when a shallow
object copy was created via implicitly defined copy constructor.
In order to enable C++ methods for DNA structures a newly added
macro `DNA_DEFINE_CXX_METHODS()` is to be used:
tpyedef struct Object {
DNA_DEFINE_CXX_METHODS(Object)
...
} Object;
For the shallow copy use `blender::dna::shallow_copy()`.
The implementation of the memcpy is hidden via an internal DNA
function to avoid pulling `string.h` into every DNA header.
This means that the solution does not affect on the headers
dependencies.
---
Ideally `DNA_shallow_copy` would be defined in a more explicit
header, but don;t think we have a suitable one already. Maybe
we can introduce `DNA_access.h` ?
Differential Revision: https://developer.blender.org/D14427
|
|
This reverts commit 8c44793228750537c08ea7b19fc18df0138f9501.
Apparently, this generated a lot of warnings in GCC.
Didn't find a quick solution and is it not something I want to be
trading between (more quiet Clang in an expense of less quiet GCC).
Will re-iterate on the patch are re-commit it.
|
|
This change makes it possible to add implementation of common
C++ methods for DNA structures which helps ensuring unsafe
operations like shallow copy are done explicitly.
For example, creating a shallow copy used to be:
Object temp_object = *input_object;
In the C++ context it was seen like the temp_object is
properly decoupled from the input object, while in the
reality is it not. Now this code becomes:
Object temp_object = blender::dna::shallow_copy(*input_object);
The copy and move constructor and assignment operators are
now explicitly disabled.
Other than a more explicit resource management this change
also solves a lot of warnings generated by the implicitly
defined copy constructors w.r.t dealing with deprecated fields.
These warnings were generated by Apple Clang when a shallow
object copy was created via implicitly defined copy constructor.
In order to enable C++ methods for DNA structures a newly added
macro `DNA_DEFINE_CXX_METHODS()` is to be used:
tpyedef struct Object {
DNA_DEFINE_CXX_METHODS(Object)
...
} Object;
For the shallow copy use `blender::dna::shallow_copy()`.
The implementation of the memcpy is hidden via an internal DNA
function to avoid pulling `string.h` into every DNA header.
This means that the solution does not affect on the headers
dependencies.
---
Ideally `DNA_shallow_copy` would be defined in a more explicit
header, but don;t think we have a suitable one already. Maybe
we can introduce `DNA_access.h` ?
Differential Revision: https://developer.blender.org/D14427
|
|
A mistake in the mesh normal refactor caused the wrong mesh to
be used when calculating normals with a shape key's deformation.
This commit fixes the normal calculation by using the correct mesh,
with just adjusted vertex positions, and calculating the results
directly into the result arrays when possible. This completely avoids
the need to make a local copy of the mesh, which makes sense,
since the only thing that changes is the vertex positions.
Differential Revision: https://developer.blender.org/D14317
|
|
Ref T95355
|
|
This commit changes `CurveComponent` to store the new curve
type by adding conversions to and from `CurveEval` in most nodes.
This will temporarily make performance of curves in geometry nodes
much worse, but as functionality is implemented for the new type
and it is used in more places, performance will become better than
before.
We still use `CurveEval` for drawing curves, because the new `Curves`
data-block has no evaluated points yet. So the `Curve` ID is still
generated for rendering in the same way as before. It's also still
needed for drawing curve object edit mode overlays.
The old curve component isn't removed yet, because it is still used
to implement the conversions to and from `CurveEval`.
A few more attributes are added to make this possible:
- `nurbs_weight`: The weight for each control point on NURBS curves.
- `nurbs_order`: The order of the NURBS curve
- `knots_mode`: Necessary for conversion, not defined yet.
- `handle_type_{left/right}`: An 8 bit integer attribute.
Differential Revision: https://developer.blender.org/D14145
|
|
|
|
Currently, when normals are calculated for a const mesh, a custom data
layer might be added if it doesn't already exist. Adding a custom data
layer to a mesh is not thread-safe, so this can be a problem in some
situations.
This commit moves derived mesh normals for polygons and
vertices out of `CustomData` to `Mesh_Runtime`. Most of the
hard work for this was already done by rBcfa53e0fbeed7178.
Some changes to logic elsewhere are necessary/helpful:
- No need to call both `BKE_mesh_runtime_clear_cache` and
`BKE_mesh_normals_tag_dirty`, since the former also does the latter.
- Cleanup/simplify mesh conversion and copying since normals are
handled with other runtime data.
Storing these normals like other runtime data clarifies their status
as derived data, meaning custom data moves more towards storing
original/editable data. This means normals won't automatically benefit
from the planned copy-on-write refactor (T95845), so it will have to be
added manually like for the other runtime data.
Differential Revision: https://developer.blender.org/D14154
|
|
|
|
It's better not to expose the details of where the dirty flags are
stored to every place that wants to know if the normals are dirty.
Some of these places are relics from before vertex normals were
computed lazily anyway, so this is more of an incrememtal cleanup.
This will make part of the fix for T95839 simpler.
|
|
This commit renames enums related the "Curve" object type and ID type
to add `_LEGACY` to the end. The idea is to make our aspirations clearer
in the code and to avoid ambiguities between `CURVE` and `CURVES`.
Ref T95355
To summarize for the record, the plans are:
- In the short/medium term, replace the `Curve` object data type with
`Curves`
- In the longer term (no immediate plans), use a proper data block for
3D text and surfaces.
Differential Revision: https://developer.blender.org/D14114
|
|
|
|
This was an issue when e.g. `bpy.data.meshes.new_from_object` was
used on an object that uses geometry nodes.
|
|
|
|
Although rB56407432a6a did fix missing subdivision in some cases, in
other cases it did not return the mesh wrapper (like when using
autosmooth, which requires a copy of the mesh), so the non-subdivided
mesh was still returned.
|
|
|
|
Since now we delegate the evaluation of the last subsurf modifier in the stack
to the draw code, Cycles does not get a subdivided mesh anymore. This is because
the subdivision wrapper for generating a CPU side subdivision is never created
as it is only ever created via `BKE_object_get_evaluated_mesh` which Cycles does
not call (rather, it accesses the Mesh either via `object.data()`, or via
`object.to_mesh()`).
This ensures that a subdivision wrapper is created when accessing the object data
or converting an Object to a Mesh via the RNA/Python API.
Reviewed by: brecht
Differential Revision: https://developer.blender.org/D14048
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
The evaluated mesh is a result of evaluated modifiers, and referencing
other evaluated IDs such as materials.
It can not be stored in the EditMesh structure which is intended to be
re-used by many areas. Such sharing was causing ownership errors causing
bugs like
T93855: Cycles crash with edit mode and simultaneous viewport and final render
The proposed solution is to store the evaluated edit mesh and its cage in
the object's runtime field. The motivation goes as following:
- It allows to avoid ownership problems like the ones in the linked report.
- Object level is chosen over mesh level is because the evaluated mesh
is affected by modifiers, which are on the object level.
This patch allows to have modifier stack of an object which shares mesh with
an object which is in edit mode to be properly taken into account (before
the change the modifier stack from the active object will be used for all
objects which share the mesh).
There is a change in the way how copy-on-write is handled in the edit mode to
allow proper state update when changing active scene (or having two windows
with different scenes). Previously, the copt-on-write would have been ignored
by skipping tagging CoW component. Now it is ignored from within the CoW
operation callback. This allows to update edit pointers for objects which are
not from the current depsgraph and where the edit_mesh was never assigned in
the case when the depsgraph was evaluated prior the active depsgraph.
There is no user level changes changes expected with the CoW handling changes:
should not affect on neither performance, nor memory consumption.
Tested scenarios:
- Various modifiers configurations of objects sharing mesh and be part of the
same scene.
- Steps from the reports: T93855, T82952, T77359
This also fixes T76609, T72733 and perhaps other reports.
Differential Revision: https://developer.blender.org/D13824
|
|
As described in T91186, this commit moves mesh vertex normals into a
contiguous array of float vectors in a custom data layer, how face
normals are currently stored.
The main interface is documented in `BKE_mesh.h`. Vertex and face
normals are now calculated on-demand and cached, retrieved with an
"ensure" function. Since the logical state of a mesh is now "has
normals when necessary", they can be retrieved from a `const` mesh.
The goal is to use on-demand calculation for all derived data, but
leave room for eager calculation for performance purposes (modifier
evaluation is threaded, but viewport data generation is not).
**Benefits**
This moves us closer to a SoA approach rather than the current AoS
paradigm. Accessing a contiguous `float3` is much more efficient than
retrieving data from a larger struct. The memory requirements for
accessing only normals or vertex locations are smaller, and at the
cost of more memory usage for just normals, they now don't have to
be converted between float and short, which also simplifies code
In the future, the remaining items can be removed from `MVert`,
leaving only `float3`, which has similar benefits (see T93602).
Removing the combination of derived and original data makes it
conceptually simpler to only calculate normals when necessary.
This is especially important now that we have more opportunities
for temporary meshes in geometry nodes.
**Performance**
In addition to the theoretical future performance improvements by
making `MVert == float3`, I've done some basic performance testing
on this patch directly. The data is fairly rough, but it gives an idea
about where things stand generally.
- Mesh line primitive 4m Verts: 1.16x faster (36 -> 31 ms),
showing that accessing just `MVert` is now more efficient.
- Spring Splash Screen: 1.03-1.06 -> 1.06-1.11 FPS, a very slight
change that at least shows there is no regression.
- Sprite Fright Snail Smoosh: 3.30-3.40 -> 3.42-3.50 FPS, a small
but observable speedup.
- Set Position Node with Scaled Normal: 1.36x faster (53 -> 39 ms),
shows that using normals in geometry nodes is faster.
- Normal Calculation 1.6m Vert Cube: 1.19x faster (25 -> 21 ms),
shows that calculating normals is slightly faster now.
- File Size of 1.6m Vert Cube: 1.03x smaller (214.7 -> 208.4 MB),
Normals are not saved in files, which can help with large meshes.
As for memory usage, it may be slightly more in some cases, but
I didn't observe any difference in the production files I tested.
**Tests**
Some modifiers and cycles test results need to be updated with this
commit, for two reasons:
- The subdivision surface modifier is not responsible for calculating
normals anymore. In master, the modifier creates different normals
than the result of the `Mesh` normal calculation, so this is a bug
fix.
- There are small differences in the results of some modifiers that
use normals because they are not converted to and from `short`
anymore.
**Future improvements**
- Remove `ModifierTypeInfo::dependsOnNormals`. Code in each modifier
already retrieves normals if they are needed anyway.
- Copy normals as part of a better CoW system for attributes.
- Make more areas use lazy instead of eager normal calculation.
- Remove `BKE_mesh_normals_tag_dirty` in more places since that is
now the default state of a new mesh.
- Possibly apply a similar change to derived face corner normals.
Differential Revision: https://developer.blender.org/D12770
|
|
This was caused by a mistake in eb0eb54d9644c5139, which removed
the clearing of the curve edit mode pointers that are set when creating
the temporary data for the conversion. If they are not cleared, the
generic ID free function will also free the edit mode data, which is
wrong when the source curve is in edit mode.
|
|
API added in rBa3ad5abf2fe85d623f9e78fefc34e27bdc14632e
|
|
Includes use of memcpy to avoid warnings about deprecated members.
|
|
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
- Minor improvements to doc-strings.
Ref T92709
|
|
|
|
Support virtual modifiers when using applying the modifier as a shape.
|
|
|
|
|
|
This patch simplifies the curve object to mesh conversion
used by the object convert operator and exporters.
The existing code had a convoluted model of ownership, and did quite
a bit of unnecessary work. It also assumed that curve objects always
evaluated to a mesh, which is not the case anymore.
Now the code checks if the object it receives is evaluated. If so,
it can simply return a copy of the evaluated mesh (or convert the
evaluated curve wire edges to a mesh if there was no evaluated mesh).
If the object isn't evaluated, it uses a temporary copy of the object
with modifiers removed to create the mesh in the same way.
This follows up on the recent changes to curve evaluation,
namely that the result is always either a mesh or a wire curve.
Differential Revision: https://developer.blender.org/D12533
|
|
|
|
|
|
This should allow easier changes when it's helpful to use C++ types.
The diff is for a test on the buildbot.
Differential Revision: https://developer.blender.org/D12528
|
