Age | Commit message (Collapse) | Author |
|
|
|
When allocating new `CustomData` layers, often we do redundant
initialization of arrays. For example, it's common that values are
allocated, set to their default value, and then set to some other
value. This is wasteful, and it negates the benefits of optimizations
to the allocator like D15082. There are two reasons for this. The
first is array-of-structs storage that makes it annoying to initialize
values manually, and the second is confusing options in the Custom Data
API. This patch addresses the latter.
The `CustomData` "alloc type" options are rearranged. Now, besides
the options that use existing layers, there are two remaining:
* `CD_SET_DEFAULT` sets the default value.
* Usually zeroes, but for colors this is white (how it was before).
* Should be used when you add the layer but don't set all values.
* `CD_CONSTRUCT` refers to the "default construct" C++ term.
* Only necessary or defined for non-trivial types like vertex groups.
* Doesn't do anything for trivial types like `int` or `float3`.
* Should be used every other time, when all values will be set.
The attribute API's `AttributeInit` types are updated as well.
To update code, replace `CD_CALLOC` with `CD_SET_DEFAULT` and
`CD_DEFAULT` with `CD_CONSTRUCT`. This doesn't cause any functional
changes yet. Follow-up commits will change to avoid initializing
new layers where the correctness is clear.
Differential Revision: https://developer.blender.org/D15617
|
|
|
|
After recent refactors to mesh normals (cfa53e0fbeed), they are no
longer stored in CustomData. A mechanism to compute them eagerly
should be implemented another way.
|
|
|
|
|
|
|
|
Caused by {rBcfa53e0fbeed}
Above commit mixed up source and destination meshes causing bad lookups
on calculated normals.
Now make sure we get normals from our destination mesh to project along.
Note this was only reported for Projected Face Interpolated mode, but
same was true for Projected Edge Interpolated mode (though that one is a
bit weird to test since I think there is generally something wrong with
that mode -- with or without rBcfa53e0fbeed).
Fixes T97528
Maniphest Tasks: T97528
Differential Revision: https://developer.blender.org/D14726
|
|
|
|
This is an internal usage parameter.
No functional changes.
|
|
The parameters indicating whether it is allocated are always `false` and
it is up to the caller to free them.
Also clang-format was triggered.
|
|
The `BVHCacheType bvh_cache_type` parameter defines specific
`BVHTrees` that cannot be customized.
So it doesn't make sense to pass this value to any
`*bvhtree_from_[...]_ex` function as the `BVHTrees` created in these
cases are custom and cannot be saved in the cache.
This also resulted in a nice cleanup in the code.
Differential Revision: https://developer.blender.org/D14479
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
As described in T91186, this commit moves mesh vertex normals into a
contiguous array of float vectors in a custom data layer, how face
normals are currently stored.
The main interface is documented in `BKE_mesh.h`. Vertex and face
normals are now calculated on-demand and cached, retrieved with an
"ensure" function. Since the logical state of a mesh is now "has
normals when necessary", they can be retrieved from a `const` mesh.
The goal is to use on-demand calculation for all derived data, but
leave room for eager calculation for performance purposes (modifier
evaluation is threaded, but viewport data generation is not).
**Benefits**
This moves us closer to a SoA approach rather than the current AoS
paradigm. Accessing a contiguous `float3` is much more efficient than
retrieving data from a larger struct. The memory requirements for
accessing only normals or vertex locations are smaller, and at the
cost of more memory usage for just normals, they now don't have to
be converted between float and short, which also simplifies code
In the future, the remaining items can be removed from `MVert`,
leaving only `float3`, which has similar benefits (see T93602).
Removing the combination of derived and original data makes it
conceptually simpler to only calculate normals when necessary.
This is especially important now that we have more opportunities
for temporary meshes in geometry nodes.
**Performance**
In addition to the theoretical future performance improvements by
making `MVert == float3`, I've done some basic performance testing
on this patch directly. The data is fairly rough, but it gives an idea
about where things stand generally.
- Mesh line primitive 4m Verts: 1.16x faster (36 -> 31 ms),
showing that accessing just `MVert` is now more efficient.
- Spring Splash Screen: 1.03-1.06 -> 1.06-1.11 FPS, a very slight
change that at least shows there is no regression.
- Sprite Fright Snail Smoosh: 3.30-3.40 -> 3.42-3.50 FPS, a small
but observable speedup.
- Set Position Node with Scaled Normal: 1.36x faster (53 -> 39 ms),
shows that using normals in geometry nodes is faster.
- Normal Calculation 1.6m Vert Cube: 1.19x faster (25 -> 21 ms),
shows that calculating normals is slightly faster now.
- File Size of 1.6m Vert Cube: 1.03x smaller (214.7 -> 208.4 MB),
Normals are not saved in files, which can help with large meshes.
As for memory usage, it may be slightly more in some cases, but
I didn't observe any difference in the production files I tested.
**Tests**
Some modifiers and cycles test results need to be updated with this
commit, for two reasons:
- The subdivision surface modifier is not responsible for calculating
normals anymore. In master, the modifier creates different normals
than the result of the `Mesh` normal calculation, so this is a bug
fix.
- There are small differences in the results of some modifiers that
use normals because they are not converted to and from `short`
anymore.
**Future improvements**
- Remove `ModifierTypeInfo::dependsOnNormals`. Code in each modifier
already retrieves normals if they are needed anyway.
- Copy normals as part of a better CoW system for attributes.
- Make more areas use lazy instead of eager normal calculation.
- Remove `BKE_mesh_normals_tag_dirty` in more places since that is
now the default state of a new mesh.
- Possibly apply a similar change to derived face corner normals.
Differential Revision: https://developer.blender.org/D12770
|
|
Also add groups in some files.
|
|
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
- Minor improvements to doc-strings.
Ref T92709
|
|
Remove the 'only_face_normals' argument.
- BKE_mesh_calc_normals_poly for polygon normals.
- BKE_mesh_calc_normals_poly_and_vertex for poly and vertex normals.
Order arguments logically:
- Pair array and length arguments.
- Position normal array arguments (to be filled) last.
|
|
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
|
|
|
|
Follow our code style for doxygen sections.
|
|
Based on investigation by Philipp Oeser (@lichtwerk) and solution by
Alexander Gavrilov (@angavrilov) in D5206, thanks!
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/blenkernel` module.
No functional changes.
|
|
Clang Tidy reported a couple of false positives. I disabled
those `NOLINTNEXTLINE`.
Differential Revision: https://developer.blender.org/D8199
|
|
This patch changes the BVHCache implementation. It will use
a primitive array in stead of the ListBase. The locking is also
changed from a global lock to a per cache instance lock.
The performance of `gabby.blend` available on the cloud increased from 9.7
fps to 10.5 fps.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D7817
|
|
|
|
This is a step that allow using `bvh_cache` for `EditMeshe`s.
|
|
This also splits vertex access and allocation so it's possible
to copy coordinates into an existing array without allocating it.
|
|
|
|
|
|
Comments after code can cause awkward line breaks.
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
Source (i.e. other) mesh should not be modified in any case in modifier
evaluation case (this is forbidden by design and can lead to all kind of
threaded locks and crashes), and doing so even in operator case was
never a good idea either.
Now that we can specifically request needed data (poly and/or loop
normals) from evaluation code, we can finally get rid of those
computations inside data transfer/mesh remapping area.
This is hopefully the last remaining bit of this 'bad crashing code' in
datatransfer area.
|
|
In some cases (currently, only when using avanced mapping of loops),
code needs access to some cddata of the source mesh (CD_NORMAL...).
We need a way to inform calling code about that (actual issue requiring
this change is fixed in next commit).
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Part of D4277 by @sobakasu
|
|
|
|
There is no point having operations that iterate over the whole
bit array as macros, so convert BLI_BITMAP_SET_ALL to a function.
Also, add more utilities for copying and manipulating masks.
Reviewers: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D4101
|
|
|
|
Differential Revision: https://developer.blender.org/D3719
|
|
Terms get/set don't make much sense when casting values.
Name macros so the conversion is obvious,
use common prefix for easier completion.
- GET_INT_FROM_POINTER -> POINTER_AS_INT
- SET_INT_IN_POINTER -> POINTER_FROM_INT
- GET_UINT_FROM_POINTER -> POINTER_AS_UINT
- SET_UINT_IN_POINTER -> POINTER_FROM_UINT
|
|
|
|
|
|
|
|
That area is now officially purged from the Devil.. errr... DerivedMesh!
|
|
This was actually rather hairy, this code is huge and complicated, easy
to make mistakes...
Good thing is, it will allow for significant simplification and more
(name) cleanup in following commits ;)
|
|
This member currently doubles the value of `ray->radius` or is not even used.
|