Age | Commit message (Collapse) | Author |
|
This is very similar to D14077. There are two differences though.
First is that vertex creases are already stored in a separate layer,
and second is that we can now completely remove use of `Mesh.cd_flag`,
since that information is now inherent to whether the layers exist.
There are two functional differences here:
* Operators are used to add and remove layers instead of a property.
* The "crease" attribute can be created and removed by geometry nodes.
The second change should make various geometry nodes slightly faster,
since the "crease" attribute was always processed before. Creases are
now interpolated generically in the CustomData API too, which should
help maintain the values across edits better.
Meshes get an `edge_creases` RNA property like the existing vertex
property, to provide more efficient access to the data in Cycles.
One test failure is expected, where different rounding between float
the old char storage means that 5 additional points are scattered in
a geometry nodes test.
Differential Revision: https://developer.blender.org/D15927
|
|
Follows existing naming for the most part, also use "num" as a suffix
in some instances (following our naming conventions).
|
|
For copy-on-write, we want to share attribute arrays between meshes
where possible. Mutable pointers like `Mesh.mvert` make that difficult
by making ownership vague. They also make code more complex by adding
redundancy.
The simplest solution is just removing them and retrieving layers from
`CustomData` as needed. Similar changes have already been applied to
curves and point clouds (e9f82d3dc7ee, 410a6efb747f). Removing use of
the pointers generally makes code more obvious and more reusable.
Mesh data is now accessed with a C++ API (`Mesh::edges()` or
`Mesh::edges_for_write()`), and a C API (`BKE_mesh_edges(mesh)`).
The CoW changes this commit makes possible are described in T95845
and T95842, and started in D14139 and D14140. The change also simplifies
the ongoing mesh struct-of-array refactors from T95965.
**RNA/Python Access Performance**
Theoretically, accessing mesh elements with the RNA API may become
slower, since the layer needs to be found on every random access.
However, overhead is already high enough that this doesn't make a
noticible differenc, and performance is actually improved in some
cases. Random access can be up to 10% faster, but other situations
might be a bit slower. Generally using `foreach_get/set` are the best
way to improve performance. See the differential revision for more
discussion about Python performance.
Cycles has been updated to use raw pointers and the internal Blender
mesh types, mostly because there is no sense in having this overhead
when it's already compiled with Blender. In my tests this roughly
halves the Cycles mesh creation time (0.19s to 0.10s for a 1 million
face grid).
Differential Revision: https://developer.blender.org/D15488
|
|
This makes changes to the opensubdiv module to support additional vertex data
besides the vertex position, that is smootly interpolated the same way. This is
different than varying data which is interpolated linearly.
Fixes T96596: wrong generated texture coordinates with GPU subdivision. In that
bug lazy subdivision would not interpolate orcos.
Later on, this implementation can also be used to remove the modifier stack
mechanism where modifiers are evaluated a second time for orcos, which is messy
and inefficient. But that's a more risky change, this is just the part to fix
the bug in 3.2.
Differential Revision: https://developer.blender.org/D14973
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
The crash was happening when the mesh had loose edges.
Loose edges are not part of OpenSubdiv topology and hence should not be
communicated to the refiner. Pass ta boolean flag indicating whether an
edge is loose or not in the mesh foreach routines, which seems to be
the easiest way.
|
|
This adds vertex creasing support for OpenSubDiv for modeling, rendering,
Alembic and USD I/O.
For modeling, vertex creasing follows the edge creasing implementation with an
operator accessible through the Vertex menu in Edit Mode, and some parameter in
the properties panel. The option in the Subsurf and Multires to use edge
creasing also affects vertex creasing.
The vertex crease data is stored as a CustomData layer, unlike edge creases
which for now are stored in `MEdge`, but will in the future also be moved to
a `CustomData` layer. See comments for details on the difference in behavior
for the `CD_CREASE` layer between egdes and vertices.
For Cycles this adds sockets on the Mesh node to hold data about which vertices
are creased (one socket for the indices, one for the weigths).
Viewport rendering of vertex creasing reuses the same color scheme as for edges
and creased vertices are drawn bigger than uncreased vertices.
For Alembic and USD, vertex crease support follows the edge crease
implementation, they are always read, but only exported if a `Subsurf` modifier
is present on the Mesh.
Reviewed By: brecht, fclem, sergey, sybren, campbellbarton
Differential Revision: https://developer.blender.org/D10145
|
|
This evaluator is used in order to evaluate subdivision at render time, allowing for
faster renders of meshes with a subdivision surface modifier placed at the last
position in the modifier list.
When evaluating the subsurf modifier, we detect whether we can delegate evaluation
to the draw code. If so, the subdivision is first evaluated on the GPU using our own
custom evaluator (only the coarse data needs to be initially sent to the GPU), then,
buffers for the final `MeshBufferCache` are filled on the GPU using a set of
compute shaders. However, some buffers are still filled on the CPU side, if doing so
on the GPU is impractical (e.g. the line adjacency buffer used for x-ray, whose
logic is hardly GPU compatible).
This is done at the mesh buffer extraction level so that the result can be readily used
in the various OpenGL engines, without having to write custom geometry or tesselation
shaders.
We use our own subdivision evaluation shaders, instead of OpenSubDiv's vanilla one, in
order to control the data layout, and interpolation. For example, we store vertex colors
as compressed 16-bit integers, while OpenSubDiv's default evaluator only work for float
types.
In order to still access the modified geometry on the CPU side, for use in modifiers
or transform operators, a dedicated wrapper type is added `MESH_WRAPPER_TYPE_SUBD`.
Subdivision will be lazily evaluated via `BKE_object_get_evaluated_mesh` which will
create such a wrapper if possible. If the final subdivision surface is not needed on
the CPU side, `BKE_object_get_evaluated_mesh_no_subsurf` should be used.
Enabling or disabling GPU subdivision can be done through the user preferences (under
Viewport -> Subdivision).
See patch description for benchmarks.
Reviewed By: campbellbarton, jbakker, fclem, brecht, #eevee_viewport
Differential Revision: https://developer.blender.org/D12406
|
|
By argument naming and convention this is the intended argument order.
|
|
|
|
|
|
The spikes were caused by non-initialized tangent matrix used during
smoothing process. The reason tangent matrix was not initialized was
because wrong usage of API: n-gons should pass corner of 0 to the
matrix construction function.
Corrected usage of the API and added assert() to help catching such
kind of non-initialized issues easier.
|
|
|
|
|
|
Propagation when changing sculpt level was missing. In fact, the mask
was simply completely removed when changing sculpt level.
Subdivision worked for simple and linear subdivision, but Catmull-Clark
was giving empty results.
Fixes propagation part of T76386.
|
|
|
|
Weights were in the different order from corners.
Doesn't fix propagation issues, but fixes an essential step towards
fully correct propagation.
|
|
|
|
|
|
There is some hard-to-reproduce scenario when top level
would have masks allocated, but without masks on the sculpt
level.
Need to check proper array before accessing its elements.
The check for top-level masks is done by the caller.
|
|
|
|
When using multires_reshape_context_create_from_ccg to create the
context mmd is null, so the subdivision smooth mode can't be checked
there.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7579
|
|
This introduces two alternative subdivision modes that generates
displacement on the grids that look as Simple subdivisions but while
using the Catmull-Clark subdivision type in the modifier. This way,
Simple and Catmull-Clark subdivision can be combined when creating new
levels if needed, for example, to sculpt hard surface objects.
Subdivide simple smooths the sculpted data when creating a new
subdivision level. Subdivide linear also preserves the sharpness
in the sculpted data.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7415
|
|
|
|
|
|
Allows to know what level sculpting has been done after the value has
been changed in the MultiresModifierData.
No functional changes, just preparing code to have everything needed
for propagation undo.
Differential Revision: https://developer.blender.org/D7307
|
|
|
|
Is done by considering all base edges infinitely sharp.
In the future can become a different operator option to allow to mix
Catmull-Clark and simple subdivisions. For now just sticking to what
old good Blender versions were doing.
Fixes T74869: Simple subdivision type is not working as it should
|
|
Avoid storing any loose edges for the propagation process.
Also avoid any edge which crease is zero.
|
|
The idea is following: only store information about edges which are
1. Communicated to the OpenSubdiv topology.
This rules out all loose edges, as they are not needed for the
propagation process.
2. Correspond to edge from the base mesh.
This avoids storing edges which are generated between inner face.
Those are not to have any sharpness to allow smooth propagation.
There is still possible to have memory peak in some obscure case when
mesh contains a lot of loose edges. It can be optimized further by
utilizing knowledge of the non-loose tags.
|
|
The title says it all actually. The test case is to get default cube,
set some edges to non-zero crease, add multires modifier and hit the
"Subdivide" button few times.
The memory footprint might be optimized by not storing information
about inner generated edges.
|
|
Might have caused access to uninitialized memory when foreach()
would have failed for some reason.
|
|
|
|
|
|
This change fixes artifacts produced by these operations.
On a technical aspect this is done by porting all of the operations
to the new subdivision surface implementation which ensures that
tangent space used to evaluate modifier and those operations is
exactly the same (before modifier will use new code and the operations
will still use an old one).
The next step is to get sculpting on a non-top level to work, and
that actually requires fixes in the undo system.
|