| Age | Commit message (Collapse) | Author |
|---|
|
This is especially useful when trying to add a node group instance, e.g. via
drag & drop from the Outliner or Asset Browser.
Previously this would just silently fail, with no information why. This is a
source of confusion, e.g. earlier, it took me a moment to realize I was
dragging a node group into itself, which failed of course.
Blender should always try to help the user with useful error messages.
Adds error messages like: "Nesting a node group inside of itself is not
allowed", "Not a compositor node tree", etc.
Adds a disabled hint return argument to node and node tree polling functions.
On error the hint is reported, or could even be shown in advance (e.g. if
checked via an operator poll option).
Differential Revision: https://developer.blender.org/D10422
Reviewed by: Jacques Lucke
|
|
|
|
This is a minor change to add some plumbing code
to support custom geo nodes. This is working the
same way as the custom cycles and compositor nodes.
An example add-in is attached to D10784
Reviewed By: JacquesLucke
Differential Revision: http://developer.blender.org/D10784
|
|
This commit adds a simple node to output the min and max of an
axis-aligned bounding box for the input geometry, as well a rectangular
prism mesh created from these values for convenience.
The initial use case for this node is a "bounding box boolean", where
doing the boolean with just a bounding box could be signigicantly
faster, for cases like cutting a hole in a wall for a window. But it's
easy to imagine other cases where it could be useful.
This node supports mesh and point cloud data right now, volume support
will come as a separate patch. Also note that there is plenty of room
to improve the performance of this node through parallelization.
Differential Revision: https://developer.blender.org/D10420
|
|
The file was not really corrupted (as in, Blender did everything
correctly while saving). I only did not consider the case when
a .blend file is resaved in an older version before.
|
|
This is an implementation of Enhanced Subpixel Morphological Antialiasing (SMAA)
The algorithm was proposed by:
Jorge Jimenez, Jose I. Echevarria, Tiago Sousa, Diego Gutierrez
This node provides only SMAA 1x mode, so the operation will be done with no spatial
multisampling nor temporal supersampling. See Patch for comparisons.
The existing AA operation seems to be used only for binary images by some other nodes.
Using SMAA for binary images needs no important parameter such as "threshold", so we
perhaps can switch the operation to SMAA, though that changes existing behavior.
Notes:
1. The program code assumes the screen coordinates are DirectX style that the
vertical direction is upside-down, so "top" and "bottom" actually represent bottom
and top, respectively.
Thanks for Habib Gahbiche (zazizizou) to polish and finalize this patch.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D2411
|
|
|
|
Although "Grid" may not be techincally correct since a grid could be 3D,
it was decided to rename the "Plane" primtive to "Grid". The primitive
node allows subdivisions, so the name is more consistent with the
operator in the 3D view.
Ref T86819
This commit includes a file subversion bump for the versioning.
|
|
This adds a Clamp node for Geometry Nodes Attributes.
Supports both Min-Max and Range clamp modes.
Float, Vector, Color and Int data types supported.
Reviewed By: HooglyBoogly, simonthommes
Differential Revision: https://developer.blender.org/D10526
|
|
This commit adds a node with a "Map Range" operation for attributes
just like the non-attribute version of the node. However, unlike the
regular version of the node, it also supports operations on vectors.
Differential Revision: https://developer.blender.org/D10344
|
|
|
|
Those nodes are leftovers from my work on particle nodes and are not needed currently.
They can be added back easily if they become necessary.
|
|
Following concerns raised in the commit that changed the name initially,
rB2e19509e60b39837, it makes more sense to keep the "Surface" name for
this node because it has a specific meaning that should not be confused
with other types of subdivision.
|
|
This patch adds the ability to mute individual wires in the node editor.
This is invoked like the cut links operator but with a new shortcut.
Mute = Ctrl + Alt
Cut = Ctrl
Dragging over wires will toggle the mute state for that wire.
The muted wires are drawn in red with a bar across the center.
Red is used in the nodes context to indicate invalid links, muted links and internal links.
When a wire is muted it exposes the original node buttons which are normally hidden when a wire is connected.
Downstream and upstream links connected using reroute nodes are also muted.
Outside scope of patch:
- Add support for pynodes e.g. Animation Nodes
- Requires minor change to check for muted links using the `is_muted` link property or the `is_linked` socket property.
Maniphest Tasks: T52659
Differential Revision: https://developer.blender.org/D2807
|
|
This commit includes nodes to build the following primitives:
- Cone
- Cylinder
- Circle
- Cube
- UV Sphere
- Ico Sphere
- Line
- Plane/Grid
In general the inputs are the same as the corresponding operators
in the 3D view.
**Line Primitive**
The line primitive has two modes-- adding vertices between two end
points, or adding vertices each at an offset from the start point.
For the former mode, there is a choice between a vertex count
and a distance between each point.
**Plane Primitive**
This commit includes the "Plane" and "Grid" primitives as one node.
Generally primitives are named after the simpler form of the shape they
create (i.e. "Cone" can make some more complex shapes). Also, generally
you want to tweak the number of subdivisions anyway, so defaulting to
plane is not an inconvenience. And generally having fewer redundant
base primitives is better.
**Future Improvements**
A following patch proposes to improve the speed of the cylinder, cone,
and sphere primitives: D10730. Additional possible future improvements
would be adding subdivisions to the cube node and rings to the cone
and cylinder nodes.
Differential Revision: https://developer.blender.org/D10715
|
|
In the current implementation, cryptomatte passes are connected to the node
and elements are picked by using the eyedropper tool on a special pick channel.
This design has two disadvantages - both connecting all passes individually
and always having to switch to the picker channel are tedious.
With the new design, the user selects the RenderLayer or Image from which the
Cryptomatte layers are directly loaded (the type of pass is determined by an
enum). This allows the node to automatically detect all relevant passes.
Then, when using the eyedropper tool, the operator looks up the selected
coordinates from the picked Image, Node backdrop or Clip and reads the picked
object directly from the Renderlayer/Image, therefore allowing to pick in any
context (e.g. by clicking on the Combined pass in the Image Viewer). The
sampled color is looked up in the metadata and the actual name is stored
in the cryptomatte node. This also allows to remove a hash by just removing
the name from the matte id.
Technically there is some loss of flexibility because the Cryptomatte pass
inputs can no longer be connected to other nodes, but since any compositing
done on them is likely to break the Cryptomatte system anyways, this isn't
really a concern in practise.
In the future, this would also allow to automatically translate values to names
by looking up the value in the associated metadata of the input, or to get a
better visualization of overlapping areas in the Pick output since we could
blend colors now that the output doesn't have to contain the exact value.
Idea + Original patch: Lucas Stockner
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D3959
|
|
This is necessary to make float sockets display a value with the unit
system. `PROP_DISTANCE` will be used quite a lot by the mesh primitives
geometry nodes patch.
Differential Revision: https://developer.blender.org/D10711
|
|
The Attribute Convert node provides functionality to change attributes
between different domains and data types. Before it was impossible to
write to a UV Map attribute with the attribute math nodes since they
did not output a 2D vector type. This makes it possible to
"convert into" a UV map attribute.
The data type conversion uses the implicit conversions provided by
`\nodes\intern\node_tree_multi_function.cc`.
The `Auto` domain mode chooses the domain based on the following rules:
1. If the result attribute already exists, use that domain.
2. If the result attribute doesn't exist, use the source attribute domain.
3. Otherwise use the default domain (points).
See {T85700}
Differential Revision: https://developer.blender.org/D10624
|
|
This patch adds a node, that removes an attribute if possible,
otherwise it adds an error message.
Differential Revision: https://developer.blender.org/D10697
|
|
This makes the following changes to the name of the two
geometry nodes subvision nodes:
- `Subdivision Surface` -> `Subdivide Smooth`
- `Subdivision Surface Simple` -> `Subdivide`
Most of the benefit is that the names are shorter, but it also better
mirrors the naming of operations in edit mode, and phrases the names
more like actions. This was discussed with the geometry nodes team.
|
|
But this time the root cause. Writing undo files is done in a separate
thread. This patch moved the updating of the matte_id when the user
actually changes the matte.
|
|
Use _fn as a suffix for callbacks.
|
|
This enables the quick access button [to show the relevant Texture in
the Properties Editor] for textures used in geometry nodes.
This goes in line to what we do for other textures:
- modifier textures have this button
- particle textures have this button
- brush textures will soon have it, too (see D9813)
When outside of the Properties Editor, the button will always show (if a
texture is actually assigned), but will be inactive if no suiting
Properties Editor to show the texture in can be found.
Note this also changes the behavior to not show the button if _no_
texture is assigned (as in: we are still showing the "New" button).
Previously it was always there (e.g. for modifier textures), even if it
would take us to an empty texture tab. (Sure, we could add a texture
there then, but imho it makes more sense to just start showing it once a
texture is already there)
For this to work with geometry nodes, the following chages were done:
- implement foreachTexLink for geonode modifiers
- new buttons_texture_user_node_property_add() that stores prop as well
as node
- also use NODE_ACTIVE_TEXTURE flag in geometry nodetrees
notes:
- this still uses the first suiting (as in: pinning does not interfere)
Properties Editor it finds, this should (maybe?) find the _closest_
Property Editor instead (see related feedback in D9813).
- this will already show the button for brush textures as well
(disabled), but there is another mandatory change in an upcomming commit
to make it work there as well (see D9813)
ref. T85278
Maniphest Tasks: T85278
Differential Revision: https://developer.blender.org/D10293
|
|
Regression from rBde25b79ff5c4, this flag is inconsistent currently for
embedded IDs, needs to be sorted out, see T86119.
|
|
|
|
This concerns currently only collections (`master_collection` of scenes)
and root node trees. It removes the matching type-specific helpers
(`BKE_collection_master_scene_search` and `BKE_node_tree_find_owner_ID`).
No functional change expected here.
NOTE: Current implementation of `owner_get` is far from optimal, we
could probably do it better, see {T69169}.
NOTE: While it could also have it, shapekeys IDTypeInfo was left out of
this change for now. Mainly because it sould not be used currently, and
we ultimately want to demote shape keys from ID status anyway.
|
|
This commit adds a simple string input node, intended for use in the
attribute workflow to make using the same attribute name in multiple
places easier. The node is function node similar to the existing vector
input node.
Ref T84971
Differential Revision: https://developer.blender.org/D10316
|
|
Add the Simple subdivision option to Geometry nodes, as a new node
instead of part of the existing subdivision node because of future
backend changes to the Simple option. (See T85584)
https://developer.blender.org/D10409
|
|
|
|
This patch adds icons to the right side of nodes when they encounter a
a problem. When hovered, a tooltip displays describing the encountered
while evaluating the node.
Some examples are: attribute doesn't exist, mesh has no faces,
incorrect attribute type, etc. Exposing more messages to the system
will be an ongoing process. Multiple warnings per node are supported.
The system is implemented somewhat generically so that the basic
structure can also be used to store more information from evaluation
for the interface, like a list of available attributes.
Currently the messages are just button tooltips. They could be styled
differently in the future. Another limitation is that every instance of
a node group in a parent node tree will have the same error messages,
the "evaluation context" used to decide when to display the tooltips
must be extended to support node tree paths.
Differential Revision: https://developer.blender.org/D10290
|
|
This commit makes links connected to multi-input sockets spread verticaly
along the socket. Sockets grow if more links are connected and the node
layout updates accordingly. Links are sorted by their incoming angle
to avoid crossing links. Also, link picking is updated to work with
spread links and bezier links.
Currently the multi-input sockets are used in the join geometry node.
The mutli-input sockets look like a vertical rounded rectangle.
Currently they do not support the other custom socket shapes.
Reviewed By Hans Goudey, with cleanup and additional edits
Differential Revision: https://developer.blender.org/D10181
|
|
These are similar to the regular "Combine XYZ" and "Separate XYZ" nodes,
but they work on attributes. They will make it easier to switch between
vector attributes and float attributes.
Differential Revision: https://developer.blender.org/D10308
|
|
|
|
Make the SHADING_PARAMETERS operation on node tree a real no-op.
The function used as a callback was only doing a debug print.
The issue with this function was that an original ID was passed
as an argument. This is a violation of design, and if anything it
should be left up to the implementation to check whether depsgraph
is active.
There are no functional changes for users in the interface. The
only difference is that the debug print will no longer happen.
|
|
This node takes a volume and generates a mesh on it's "surface".
The surface is defined by a threshold value.
Currently, the node only works on volumes generated by the
Points to Volume node. This limitation will be resolved soonish.
Ref T84605.
Differential Revision: https://developer.blender.org/D10243
|
|
This node calculates a distance from each point to the closest position
on a target geometry, similar to the vertex weight proximity modifier.
Mapping the output distance to a different range can be done with an
attribute math node after this node.
A drop-down changes whether to calculate distances from points,
edges, or faces. In points mode, the node also calculates distances
from point cloud points.
Design task and use cases: T84842
Differential Revision: https://developer.blender.org/D10154
|
|
|
|
This node outputs true when geometry nodes is currently evaluated
for the viewport and false for final renders.
Ref T85277.
Differential Revision: https://developer.blender.org/D10302
|
|
Normally sockets only have one input link. This commit adds the back-end
changes needed to use multiple input links per socket.
Multi-input sockets can be defined with a new flag in `bNodeSocketType`.
The changes necessary to make the sockets work in the geometry nodes
evaluator are generalizing input socket values as a vector of values,
and supporting this in the derived node tree structure.
This patch should contain no functional changes. Two upcoming patches
will use this system for the "Join Geometry" node and expose link picking
and updated display in the UI: D10069 and D10181.
Reviewed By: Jacques Lucke, Hans Goudey
Differential Revision: https://developer.blender.org/D10067
|
|
Implements a node to get collection objects.
These objects are then passed along as instances in the node tree.
Follow up tasks:
Multiple nodes does not support instancing yet: T85159
Changing collection offset does not trigger a refresh: T85274
Reviewed By: Jacques, Dalai, Hans
Differential Revision: http://developer.blender.org/D10151
|
|
rB198ff4703f84d0c3267 neglected to remove designated initializers,
which are not supported in the C++ 17 standard.
|
|
Required changes to compile `node.cc` with clang tidy:
* Use c++ includes like (e.g. climits instead limits.h).
* Insert type casts when casting from `void *`.
* Replace `NULL` with `nullptr`.
* Replace typedef statements.
This change is in order to use the `blender::Map` data structure
for node error messages.
|
