Age | Commit message (Collapse) | Author |
|
Note that `BKE_library.h`/`library.c` were renamed to
`BKE_lib_id.h`/`lib_id.c` to avoid having a too generic name here.
Part of T72604.
|
|
Old Name New Name
========= =========
init_def_material BKE_materials_init
BKE_material_gpencil_default_free BKE_materials_exit
test_object_materials BKE_object_materials_test
test_all_objects_materials BKE_objects_materials_test_all
give_matarar BKE_object_material_array
give_totcolp BKE_object_material_num
give_current_material_p BKE_object_material_get_p
give_current_material BKE_object_material_get
assign_material BKE_object_material_assign
assign_matarar BKE_object_material_array_assign
give_matarar_id BKE_id_material_array
give_totcolp_id BKE_id_material_num
assign_material_id BKE_id_material_assign
clear_matcopybuf BKE_material_copybuf_clear
free_matcopybuf BKE_material_copybuf_free
copy_matcopybuf BKE_material_copybuf_copy
paste_matcopybuf BKE_material_copybuf_paste
BKE_material_init_gpencil_settings BKE_gpencil_material_attr_init
BKE_material_add_gpencil BKE_gpencil_material_add
BKE_material_gpencil_get BKE_gpencil_material
BKE_material_gpencil_default_get BKE_gpencil_material_default
BKE_material_gpencil_settings_get BKE_gpencil_material_settings
|
|
|
|
|
|
The `give_parvert()` function was only considering the mesh's original
vertex indices when the parent vertex index was valid for the evaluated
mesh. However, when using the Mask modifier the evaluated mesh can have
less vertices but still have the parent vertex.
Since the `if (nr < numVertex)` condition wasn't used to prevent any
out-of-bounds access, and seems just an incorrect optimisation, it could
be removed.
|
|
### Description of the problem
Until now, it is only possible to correctly add a lightprobe in python via an operator:
`bpy.ops.object.lightprobe_add()`
### Description of the proposed solution
The idea of this patch is to fix the lack of consistency lightprobe creation without operator.
It allow creation of different lightprobe type directly via `bpy.data.lightprobes.new(name, type)` (such as for curves).
In order to make it possible I had to:
1. Add a function `BKE_lightprobe_configure` in charge of lightprobe settings configuration (avoid code redundancy)
2. Allow an object to take lightprobe datablock as data during is initialization.
### A short example of this patch usage
```
lp = bpy.data.lightprobes.new('some_name','PLANAR')
bpy.data.objects.new('toto', lp)
```
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6396
|
|
using quaternions
`ob->quat` is `v4`.
|
|
A collection of smaller changes that are required in the /blender/source files. A lot of them are also due to variable renaming.
Reviewed By: sergey
Maniphest Tasks: T59995
Differential Revision: https://developer.blender.org/D3855
|
|
This function exposes the already-existing static `object_moves_in_time()`
function, and optionally recursively checks the parent object for
animatedness as well.
I also added checking `AnimData::overrides` to
`BKE_animdata_id_is_animated()`. This ensures that, apart from the optional
recursion to the parent object, the function has the same functionality.
|
|
The function isn't used anywhere, and it's deceptively returning false
negatives. For example, `modifier_dependsOnTime()` will return `false`
for hook modifiers, even when the hook target is animated. Querying the
depsgraph for dependency on the time source would be a better approach.
|
|
Also correct some outdated symbol references,
add missing 'name' commands.
|
|
This introduces object mode tagging for data which hasn't yet been
written back to the ID data.
Now when selecting other sculpt objects, the original objects data is
flushed back to the ID before writing a memfile undo step.
|
|
Users now can turn on in a viewport collections that are temporarily
hidden (eye) in the view layer.
Design task: T61327
As for the implementation, I had to decouple the visibility in the
depsgraph from the visibility in the view layer.
Also there is a "bug" that in a way was there before which is some
operators (e.g., writing a text inside of a text object, tab into edit
mode) run regardless of the visibility of the active object. The bug was
present already (with object type visibility restriction) in 2.80 so if
we decide to tackle it, can be done separately (I have a patch for it
though P1132).
Reviewed by: brecht (thank you)
Differential Revision: D5992
|
|
|
|
These were only strictly valid for texture space calculation, don't store them
since they should not be used after that. Only store a flag to indicate if the
auto texture space has been evaluated.
In the future it might make sense to store bounding boxes at the mesh level to
speed up bounding box computation for multiple objects using the same mesh, but
then it will need to be implemented differently.
|
|
|
|
Parenting/constraints/delta-scaled all caused setting dimensions to fail.
Take the difference between the input scale and final scale into
account when applying the dimensions.
|
|
Useful for using reference images that only make sense to see
in aligned axis-views.
This restores functionality possible with 2.7x background images.
See: T52668.
|
|
In its current version that was a totally useless extra layer of crap
that we can totally avoid. Plus name was bad too.
|
|
This was a mistake in rB87629b2a7443
`BKE_object_shapekey_free` would never return `true`, so DEG updates
would not happen...
So `ob->shapenr` was not up-to-date etc., leading to crash in
`BKE_mesh_nomain_to_mesh` shapekey handling...
Reviewers: brecht
Maniphest Tasks: T68710
Differential Revision: https://developer.blender.org/D5501
|
|
|
|
T68035 by @luzpaz
|
|
Use explicit boolean flag to indicate whether flush to original data
is needed or not. Makes it possible to avoid confusion on whether an
evaluated or any depsgraph can be passed to the API.
Allows to remove depsgraph from bAnimContext as well.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5379
|
|
Mode crashes Blender.
Main issue in that report was that meshes generated from
`mesh_create_eval_final_view()` and the like need some
special freeing handling (as, among other things, they borrow and do not
own their potential editmesh data...).
Factorized that into a helper func also used by
`BKE_object_free_derived_caches()`.
|
|
RigidBodyConstraints collection.
We only had a very limited, specific handling of that in collection
duplication code, but this has to be handled at a much more general
level in Object copy code itself, since it makes no sense to duplicate
rigidbody object data without adding new copy to relevant rigidbody
collections...
WARNING: This is a fairly risky rework of rigidbody handling logic
when copying an Object data-block. It is *NOT* considered safe enough
for 2.80 release.
I tried to take into account copy flags to not mess with other IDs
(collections) when we are copying outside of Main, and also not do deg
tags when this is forbidden, but risk of something going wrong here is
too high...
|
|
This reverts commit 36faf739a71624b6ca10cec7233779f9eeace0bd.
Somewhat annoying but this change had some unforeseen consequences,
which lead to an actual bug.
Since this change was not sufficient to get original report fixed
is easier to simply revert for now.
Fixes T65842: Hair disappears when clicking on particle system name
|
|
Allows it to be preserved during copy-on-write update when on-geometry
related update is needed.
This is a required part for T63537, where we need to preserve the entire
evaluation data when object is tagged for only RECALC_COPY_ON_WRITE.
Reviewers: brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5023
|
|
Most of the time this actually tags evaluated mesh which will be tossed
away few lines below anyway. And this causes issues if the evaluated
mesh is actually owned by the mesh datablock.
The bounding box now has clear separation between original object data
and object data after modifiers, so this should not be causing any
issues.
|
|
2.7x with hierarchy duplication set to "group".
Regression introduced by rB7fe3d1e7d718 (fixing T57934).
This effectively reverts rBrB7fe3d1e7d718, since changing the type of an
object is a very bad idea in general, and would need a careful and
complex check of all of its usages (many object usages assume a specific
type of object...).
Instead, we simply remove duplicollection on those objects, and give a
warning in case dupligroup was effectively used (in many reported cases,
dupligroup was a 'mistake setting', without actually instancing
aniything).
Note that the otehr idea to fix that versioning issue (to create a new
empty object for the instancing) is much less easy than it might look
(one would need to take into account potential animations, relations
between objects, etc.). Doable probably, but way overkill for a
corner-case 'bad' usage of the feature in the first place.
|
|
This restores the code that updates the sculpt session and PBVH from dependency
graph evaluation.
|
|
Was missing re-set evaluated mesh to NULL.
Fix T65302: Crash after selecting one of multiple materials
Fix T65346: Blender crashes when selecting material in editing mode and LookDev view
Fix T65344: Blender crashes in edit mode when changing object
|
|
The idea is to share a mesh data-block as a result across all objects
which are sharing same original mesh and have no effective modifiers.
This mesh is owned by an original copy-on-written version of object data.
Tricky part is to make sure it is only initialized once, and currently a
silly mutex lock is used. In practice it only locks if the mesh is not
already there.
As an extra bonus, even viewport memory is also lower after this change.
Reviewers: brecht, mont29
Reviewed By: brecht, mont29
Differential Revision: https://developer.blender.org/D4954
|
|
Reviewers: mont29, brecht
Maniphest Tasks: T65175
Differential Revision: https://developer.blender.org/D4956
|
|
This commit extends dependency graph API with an argument which
denotes that all custom data layers are to be preserved. This
forces modifier stack re-evaluation with more inclusive mask.
Far from ideal, since this might fail in certain configurations
with indirectly used objects which might be missing layers needed
for the current object evaluation. But this is how it worked for
a long time, so should be good enough for until more sophisticated
solution is found.
In order to use this new behavior two things are to be passed:
- Pass keep_all_data_layers=True
- Pass a valid dependency graph.
The dependency graph is only needed if keep_all_data_layers=True
and is NOT to be passed if keep_all_data_layers=False.
If keep_all_data_layers=True the dependency graph MUST be passed.
Reviewers: mont29, brecht
Reviewed By: mont29
Maniphest Tasks: T64994, T64794
Differential Revision: https://developer.blender.org/D4940
|
|
|
|
One of the usecases is to create mesh from an object is a manner similar to
how Apply Modifiers does it, and have it in the bmain so it can be referenced
by other objects.
This usecase is something what went unnoticed in the previous API changes, so
here is a followup.
Summary of changes:
* bpy.meshes.new_from_object() behaves almost the same as before this change.
The difference now is that it now ensures all referenced data-blocks are
original (for example, materials referenced by the mesh).
* object.to_mesh() now creates free-standing Mesh data-block which is outside
of any bmain. The object owns it, which guarantees the memory never leaks.
It is possible to force free memory by calling object.to_mesh_clear().
Reviewers: brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D4875
|
|
This also makes `IDP_CopyProperty` the "opposite"
of `IDP_FreeProperty`, which is what I'd expect.
Two refactoring steps:
* rename IDP_FreeProperty to IDP_FreePropertyContent
* new IDP_FreeProperty function that actually frees the property
Reviewers: brecht
Differential Revision: https://developer.blender.org/D4872
|
|
When using multiple viewlayers and switching between them the selection
gets buggy. The reason for this is that the select_id is updated based
on the index in the viewlayer. This makes the select_id not unique as
objects might be shared or not shared at all.
This fix will update the select_id on all objects in main. This will be triggered in all the selection operators.
Reviewed By: sergey, brecht
Maniphest Tasks: T55617
Differential Revision: https://developer.blender.org/D4824
|
|
Useful to get the un-scaled rotation from a pose channel.
|
|
See revision D4766
|
|
|
|
|
|
Now that B-Bone shape data is kept in bPoseChannel_Runtime, the
armature level cache only holds one quaternion value per bone.
It can also be moved to runtime, and the structure removed.
This has an additional effect that, as far as I can tell, now
the Armature modifier can run as soon as all of the bones it
actually needs are done, thus making T59848 a purely depsgraph
level problem.
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
Use doxy references to function and enums,
also correct some names which became out of sync.
|
|
because of the put in Collection order, sometimes fail.
Remove remapping to new IDs from `BKE_object_duplicate()` itself, doing
it here will break later remapping done after all desired objects have
been duplicated, preventing complete remap of ID pointers used in obdata
and other sub-data of duplicated objects.
Checked, the only two usages of this function were already doing
separated later step for this anyway.
|
|
Comments, code consistency, remove disabled code...
|
|
Use prefix now there isn't only the 3d version.
|
|
Also remove redundant check for meshes.
|
|
This introduces a new iterator, FOREACH_COLLECTION, that unlike the
FOREACH_SCENE_COLLECTION it iterates over all the Blender file
collections, including the scene master collection, as well the database
ones (bmain).
Reviewers: brecht
|