| Age | Commit message (Collapse) | Author |
|---|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
This is part of the project of converting `MVert` into `float3`.
(more details in T93602), The pbvh update flag is removed and
replaced with a bitmap stored in the PBVH structure. This
patch is similar to D13878. This is mainly setup for an eventual
performance improvement by removing the extra data from
mesh vertices, but if it's consistent with testing in the other patch
doing the same thing for another "temp tag", then it may actually
increase the speed of sculpt code slightly, since less memory needs
to be loaded when checking/changing the flags.
Differential Revision: https://developer.blender.org/D14000
|
|
Since d9c6ceb3b88b6db87490b08e0089f9a18e6c52d6 partial updates to
normals in sculpt-mode were accumulating into the current normal
instead of a zeroed value.
Zero vertex normal values tagged for calculation before accumulation.
Reviewed By: HooglyBoogly
Ref D13975
|
|
|
|
As described in T91186, this commit moves mesh vertex normals into a
contiguous array of float vectors in a custom data layer, how face
normals are currently stored.
The main interface is documented in `BKE_mesh.h`. Vertex and face
normals are now calculated on-demand and cached, retrieved with an
"ensure" function. Since the logical state of a mesh is now "has
normals when necessary", they can be retrieved from a `const` mesh.
The goal is to use on-demand calculation for all derived data, but
leave room for eager calculation for performance purposes (modifier
evaluation is threaded, but viewport data generation is not).
**Benefits**
This moves us closer to a SoA approach rather than the current AoS
paradigm. Accessing a contiguous `float3` is much more efficient than
retrieving data from a larger struct. The memory requirements for
accessing only normals or vertex locations are smaller, and at the
cost of more memory usage for just normals, they now don't have to
be converted between float and short, which also simplifies code
In the future, the remaining items can be removed from `MVert`,
leaving only `float3`, which has similar benefits (see T93602).
Removing the combination of derived and original data makes it
conceptually simpler to only calculate normals when necessary.
This is especially important now that we have more opportunities
for temporary meshes in geometry nodes.
**Performance**
In addition to the theoretical future performance improvements by
making `MVert == float3`, I've done some basic performance testing
on this patch directly. The data is fairly rough, but it gives an idea
about where things stand generally.
- Mesh line primitive 4m Verts: 1.16x faster (36 -> 31 ms),
showing that accessing just `MVert` is now more efficient.
- Spring Splash Screen: 1.03-1.06 -> 1.06-1.11 FPS, a very slight
change that at least shows there is no regression.
- Sprite Fright Snail Smoosh: 3.30-3.40 -> 3.42-3.50 FPS, a small
but observable speedup.
- Set Position Node with Scaled Normal: 1.36x faster (53 -> 39 ms),
shows that using normals in geometry nodes is faster.
- Normal Calculation 1.6m Vert Cube: 1.19x faster (25 -> 21 ms),
shows that calculating normals is slightly faster now.
- File Size of 1.6m Vert Cube: 1.03x smaller (214.7 -> 208.4 MB),
Normals are not saved in files, which can help with large meshes.
As for memory usage, it may be slightly more in some cases, but
I didn't observe any difference in the production files I tested.
**Tests**
Some modifiers and cycles test results need to be updated with this
commit, for two reasons:
- The subdivision surface modifier is not responsible for calculating
normals anymore. In master, the modifier creates different normals
than the result of the `Mesh` normal calculation, so this is a bug
fix.
- There are small differences in the results of some modifiers that
use normals because they are not converted to and from `short`
anymore.
**Future improvements**
- Remove `ModifierTypeInfo::dependsOnNormals`. Code in each modifier
already retrieves normals if they are needed anyway.
- Copy normals as part of a better CoW system for attributes.
- Make more areas use lazy instead of eager normal calculation.
- Remove `BKE_mesh_normals_tag_dirty` in more places since that is
now the default state of a new mesh.
- Possibly apply a similar change to derived face corner normals.
Differential Revision: https://developer.blender.org/D12770
|
|
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
- Minor improvements to doc-strings.
Ref T92709
|
|
|
|
|
|
|
|
|
|
This shows the text as part of the assertion message.
|
|
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
|
|
This patch fixes many minor spelling mistakes, all in comments or
console output. Mostly contractions like can't, won't, don't, its/it's,
etc.
Differential Revision: https://developer.blender.org/D11663
Reviewed by Harley Acheson
|
|
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10707
|
|
This was caused when the BKE_pbvh_draw_cb function was used with
update_only_visible set to false. In that case, all nodes with the flag
were updating, but the update flag was only cleared for visible nodes.
This was causing constant updates per redraw in no visible nodes until
they enter the view frustum and their flag was cleared.
In order to fix this and prevent it from happening again:
- Updating the buffers, flushing the updates and clearing the flags are
now part of the same function. It does not make sense to do these in
separate places.
- The BKE_pbvh_draw_cb function was refactored so the
pbvh_update_draw_buffers is only called once. It should now be easier to
understand what the function does when it is used to update only visible
nodes or all nodes.
Reviewed By: mont29
Maniphest Tasks: T79146
Differential Revision: https://developer.blender.org/D9935
|
|
This adds the vertex and face count info to the scene stats in sculpt
mode. These stats count the active vertices and faces in the
sculptsession for the active object. This has the following advantages:
- It is possible to know how many vertices the sculptsession has active
comparted to the vertex count of the entire scene from sculpt mode
- When sculpting with constructive modifiers, these stats will report the
number of vertices that you can actually sculpt with, instead of the
vertex count of the modified mesh and the entire scene.
Reviewed By: sergey, dbystedt
Differential Revision: https://developer.blender.org/D9623
|
|
Corrects incorrect usage of contraction for 'it is', when possessive 'its' was required.
Differential Revision: https://developer.blender.org/D9250
Reviewed by Campbell Barton
|
|
Also order sizeof(..) first to promote other values to size_t.
|
|
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/blenkernel` module.
No functional changes.
|
|
This uses the vertices per grid instead of quads to set the limit of
grids per PBVH Node. This should create more leaf nodes in lower
subdivisions levels where the duplicates count is high, producing more
uniform performance across different levels.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8454
|
|
Clang Tidy reported a couple of false positives. I disabled
those `NOLINTNEXTLINE`.
Differential Revision: https://developer.blender.org/D8199
|
|
As tools iterators skip not visible vertices, fully hidden nodes can
also be skipped and considered as masked.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8244
|
|
This function was using the wrong flag to update the visibility state of
the nodes, so I assume that most of the partially visible optimizations
were not working.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8243
|
|
Sculpt Vertex Colors is a painting system that runs inside sculpt mode, reusing all its tools and optimizations. This provides much better performance, easier to maintain code and more advanced features (new brush engine, filters, symmetry options, masks and face sets compatibility...). This is also the initial step for future features like vertex painting in Multires and brushes that can sculpt and paint at the same time.
This commit includes:
- SCULPT_UNDO_COLOR for undo support in sculpt mode
- SCULPT_UPDATE_COLOR and PBVH flags and rendering
- Sculpt Color API functions
- Sculpt capability for sculpt tools (only enabled in the Paint Brush for now)
- Rendering support in workbench (default to Sculpt Vertex Colors except in Vertex Paint)
- Conversion operator between MPropCol (Sculpt Vertex Colors) and MLoopCol (Vertex Paint)
- Remesher reprojection in the Voxel Remehser
- Paint Brush and Smear Brush with color smoothing in alt-smooth mode
- Parameters for the new brush engine (density, opacity, flow, wet paint mixing, tip scale) implemented in Sculpt Vertex Colors
- Color Filter
- Color picker (uses S shortcut, replaces smooth)
- Color selector in the top bar
Reviewed By: brecht
Maniphest Tasks: T72866
Differential Revision: https://developer.blender.org/D5975
|
|
This was missing from when Face Sets were enabled in Multires, so it was
always considering that all vertices in the grids are visible. This
should also fix other unreported bugs.
Reviewed By: sergey
Maniphest Tasks: T76776
Differential Revision: https://developer.blender.org/D7809
|
|
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7889
|
|
|
|
|
|
|
|
This removes the smooth shading rendering from the face set overlay when
smooth shading is enabled.
Reviewed By: jbakker
Maniphest Tasks: T74906, T74622, T75331, T76530
Differential Revision: https://developer.blender.org/D7105
|
|
|
|
When sculpting the GPU batches are constructed with only the required data
for a single viewport. When that viewport changes shading or coloring mode (object
to vertex) batches might not hold all the needed information.
There is also a case when you have two 3d viewport one in object color
mode and the other in vertex color mode that the GPU batches were
updated without any vertex colors.
In order to fix these category of issues this patch would always
construct the full GPU batches for sculpting.
Reviewed By: Clément Foucault, Pablo Dobarro
Maniphest Tasks: T75908
Differential Revision: https://developer.blender.org/D7701
|
|
|
|
nearest_vertex_co was not reset when a new triangle was intersected by
the ray, so it was always returning the closest vertex to the real
cursor position in any triangle, which was not always the triangle under
the cursor.
Reviewed By: sergey
Maniphest Tasks: T75968
Differential Revision: https://developer.blender.org/D7485
|
|
|
|
This patch enables TBB as the default task scheduler. TBB stands for Threading Building Blocks and is developed by Intel. The library contains several threading patters. This patch maps blenders BLI_task_* function to their counterpart. After this patch we can add more patterns. A promising one is TBB:graph that can be used for depsgraph, draw manager and compositor.
Performance changes depends on the actual hardware. It was tested on different hardwares from laptops to workstations and we didn't detected any downgrade of the performance.
* Linux Xeon E5-2699 v4 got FPS boost from 12 to 17 using Spring's 04_010_A.anim.blend.
* AMD Ryzen Threadripper 2990WX 32-Core Animation playback goes from 9.5-10.5 FPS to 13.0-14.0 FPS on Agent 327 , 10_03_B.anim.blend.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D7475
|
|
Should be no functional changes.
|
|
These values were hardcoded before Face Sets were enabled for Multires,
so enable the show_face_sets checks now.
Reviewed By: jbakker
Maniphest Tasks: T75329
Differential Revision: https://developer.blender.org/D7444
|
|
The Layer brush was in Blender before 2.81, when the sculpt API was
introduced. It had a huge amount of bugs and glitches which made it
almost unusable for anything but the most trivial cases. Also, it needed
some hacks in the code just to support the persistent base.
The brush was completely rewritten using the Sculpt API. It fulfills the
same use case as the old one, but it has:
- All previous artifacts fixed
- Simpler code
- Persistent base now works with multires thanks to the sculpt API
- Small cursor widget to preview the layer height
- More controllable and smoother strength and deformation
- More correct masking support
- More predictable invert support. When using persistent base, the brush invert mode resets to layer height 0, instead of jumping from +1 to -1. The brush can still be inverted in the brush direction property.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7147
|
|
In Blender 2.81 we update and draw all nodes inside the view planes.
When navigating with a pen tablet after an operation that tags the whole
mesh to update (like undo or inverting the mask), this introduces some
lag as nodes are updating when they enter the view. The viewport is not
fully responsive again until all nodes have entered the view after the
operation.
This commit delays nodes updates until the view navigation stops, so the
viewport navigation is always fully responsive. This introduces some
artifacts while navigating, so it can be disabled if you don't want to
see them.
I'm storing the update planes in the PBVH. This way I can add support
for some tools to update in real-time only the nodes inside this plane
while running the operator, like the mesh filter.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6269
|
|
This fixes the following issues:
- Previously, the face set from the active vertex was used directly. Vertices always return the most recently created face set, so in some cases there may be some face sets that were not possible to select as active. Now the active face set is set in the ray intersection, so it always matches the face under the cursor.
- When drawing face sets they were set per vertex, so it was not possible to paint one face at a time. Now face sets are painted per poly when using the brush on meshes, testing the distance to the center of each poly.
- The code for the active vertex on PBVH_GRIDS was not correct, so I also fixed that to test if everything was working correctly.
{F8441699}
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7303
|
|
This implements the Sculpt Mode API functions needed for Face Sets and
visibility management for PBVH_GRIDS. No major changes were needed in
the operators and the sculpt mode code. This implementation stores the
face sets in the base mesh, so faces created in higher subdivision
levels can't be modified individually. Also, we are not checking for
multiple face sets per vertex (that can be added in the future), so
relax tools don't work yet. The rest of the features (paint, undo,
visibility operators..) work as expected.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7168
|
|
|
|
This introduces a variable to store a face set ID which is going to be
rendered white. When initializing a mesh or randomizing the colors, this
variable gets updated to always render a white face set. This way the
face set overlay can be enabled without adding colors to the mesh if
face sets are not in use. After creating the first face set, new colors
are generated randomly like usual.
The face set stored as default does not have any special meaning for
tools or brushes, it just affects the rendering color.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7035
|
|
Face Sets are the new system to control the visibility state of the mesh in sculpt and paint modes. They are designed to work in modes where brushes are the primary way of interaction and they provide much more control when working with meshes with complex shapes and overlapping surfaces.
This initial commit includes:
- Sculpt Face Sets data structures and PBVH rendering.
- Face Set overlay and opacity controls.
- Sculpt Undo support.
- Remesher reprojection support. The visibility state of the mesh is also preserved when remeshing.
- Automasking and Mesh filter support.
- Mask expand operator mode to expand Face Sets (Shift + W) and flood fill areas by connectivity (press Ctrl while expanding).
- Sculpt Mode Face Sets and Visibility API.
- Sculpt Face Sets creation and visibility management operators.
- Operator to randomize the Face Sets colors.
- Draw Face Sets brush tool to create and edit the Face Sets. Drawing on the mesh creates a new Face Set. Pressing Ctrl before drawing modifies the Face Set under the brush at the beginning of the stroke.
- Updated keymap and menu to work with Face Sets from Sculpt Mode (H to toggle visibility, Alt + H to show all, Shit + H to hide).
- Pie menu on the W key with Face common Sets operations.
Know limitations:
- Multires support. The Face Sets and Visibility API needs to be implemented for Multires.
Reviewed By: jbakker, #user_interface, Severin
Differential Revision: https://developer.blender.org/D6070
|
|
The coordinates should be read from the PBVH when using deform modifiers.
This is needed for the cloth brush to work with subdivisions, as it reads the
vertex coordinates using this function when building and updating the
constraints.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6967
|
|
|
