| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Differential Revision: https://developer.blender.org/D3719
|
|
|
|
|
|
|
|
This is the same approach as 98a0bcd4252e952fa5438e9d1b69b0204f8a8746
applied to soft body simulation. In short, CoW copies share the point cache,
and treat it as read-only except when the depsgraph is active.
|
|
To prevent the pointcache from being copied-on-write too (and requiring
copying back), the cache is now shared between the original and
evaluated scenes. Reading from the cache is always allowed; running the
sim and writing to the cache is only allowed when the depsgraph is
active.
Some pointers have moved from RigidBodyWorld (RBO) to
RigidBodyWorldShared (RBOS). writefile.c copies some pointers back from
RBOS to RBO so that the file can still be opened on older Blenders
without crashing on a segfault.
The RigidBodyWorldShared struct is written to the blend file, because it
refers to the PointCache ID block.
The RigidObjectShared struct is runtime-only, and thus not saved to the
blend file.
An RNA getter-function is used to hide the new 'shared' pointer. As a
result the Python API hasn't changed.
Reviewed by: campbellbarton
Differential Revision: https://developer.blender.org/D3508
|
|
|
|
|
|
Note that due to RNA get/setters issue, that one may actually add some
G.main usages to the total... But at least it's not hidden anymore in a
very low-level, dark corner of BKE pointcache code!
|
|
Conflicts:
source/blender/blenkernel/intern/blendfile.c
source/blender/blenkernel/intern/node.c
source/blender/blenkernel/intern/particle.c
|
|
|
|
For physics simulation it's still fuzzy though, but this needs bigger
design for how it works with view layers and visibility.
|
|
This commit actually adds some G.main... but at much, much higher level
than the ones it removes, so should still be better ;)
|
|
Conflicts:
source/blender/blenkernel/intern/blendfile.c
source/blender/blenloader/intern/readfile.h
source/blender/blenloader/intern/versioning_250.c
source/blender/blenloader/intern/versioning_260.c
source/blender/blenloader/intern/versioning_270.c
source/blender/blenloader/intern/versioning_legacy.c
source/blender/editors/render/render_shading.c
source/blender/makesrna/intern/rna_movieclip.c
source/blender/render/intern/source/pipeline.c
source/blender/render/intern/source/voxeldata.c
|
|
|
|
|
|
Strip unindented comment blocks - mainly headers to avoid conflicts.
|
|
|
|
This commit adds number formatting (thousands separator) to the baking panel. It also adds a new function to format memory sizes (KB/GB/etc) and applies it to the baking panel and scene stats. The new function is unit tested.
Reviewers: Severin
Tags: #user_interface
Differential Revision: https://developer.blender.org/D1248
|
|
OVERVIEW
* In 2.7 terminology, all layers and groups are now collection datablocks.
* These collections are nestable, linkable, instanceable, overrideable, ..
which opens up new ways to set up scenes and link + override data.
* Viewport/render visibility and selectability are now a part of the collection
and shared across all view layers and linkable.
* View layers define which subset of the scene collection hierarchy is excluded
for each. For many workflows one view layer can be used, these are more of an
advanced feature now.
OUTLINER
* The outliner now has a "View Layer" display mode instead of "Collections",
which can display the collections and/or objects in the view layer.
* In this display mode, collections can be excluded with the right click menu.
These will then be greyed out and their objects will be excluded.
* To view collections not linked to any scene, the "Blender File" display mode
can be used, with the new filtering option to just see Colleciton datablocks.
* The outliner right click menus for collections and objects were reorganized.
* Drag and drop still needs to be improved. Like before, dragging the icon or
text gives different results, we'll unify this later.
LINKING AND OVERRIDES
* Collections can now be linked into the scene without creating an instance,
with the link/append operator or from the collections view in the outliner.
* Collections can get static overrides with the right click menu in the outliner,
but this is rather unreliable and not clearly communicated at the moment.
* We still need to improve the make override operator to turn collection instances
into collections with overrides directly in the scene.
PERFORMANCE
* We tried to make performance not worse than before and improve it in some
cases. The main thing that's still a bit slower is multiple scenes, we have to
change the layer syncing to only updated affected scenes.
* Collections keep a list of their parent collections for faster incremental
updates in syncing and caching.
* View layer bases are now in a object -> base hash to avoid quadratic time
lookups internally and in API functions like visible_get().
VERSIONING
* Compatibility with 2.7 files should be improved due to the new visibility
controls. Of course users may not want to set up their scenes differently
now to avoid having separate layers and groups.
* Compatibility with 2.8 is mostly there, and was tested on Eevee demo and Hero
files. There's a few things which are know to be not quite compatible, like
nested layer collections inside groups.
* The versioning code for 2.8 files is quite complicated, and isolated behind
#ifdef so it can be removed at the end of the release cycle.
KNOWN ISSUES
* The G-key group operators in the 3D viewport were left mostly as is, they
need to be modified still to fit better.
* Same for the groups panel in the object properties. This needs to be updated
still, or perhaps replaced by something better.
* Collections must all have a unique name. Less restrictive namespacing is to
be done later, we'll have to see how important this is as all objects within
the collections must also have a unique name anyway.
* Full scene copy and delete scene are exactly doing the right thing yet.
Differential Revision: https://developer.blender.org/D3383
https://code.blender.org/2018/05/collections-and-groups/
|
|
|
|
|
|
|
|
The depsgraph now contains all the state needed to evaluate it.
Differential Revision: https://developer.blender.org/D3147
|
|
We now only look into dupli groups to find point caches to edit. This
feature is a leftover from the old proxy system, and evaluating the
full dupli list and all transforms was overkill. With static overrides
we may want to get rid of using duplis entirely, and just let users
select the objects directly.
|
|
|
|
Conflicts:
source/blender/blenkernel/BKE_blender_version.h
|
|
This is used to determine which voxels are to be considered empty space.
Previously it was hardcoded for converting dense grids to OpenVDB grids
to reduce disk space usage.
This value is also useful for rendering engines to know, i.e. to
optimize ray marching.
|
|
Some other software cannot handle grid names with spaces in them. We still check for names with spaces so as to not break old
files.
This fixes T53802.
|
|
|
|
|
|
The RenderResult struct still has a listbase of RenderLayer, but that's ok
since this is strictly for rendering.
* Subversion bump (to 2.80.2)
* DNA low level doversion (renames) - only for .blend created since 2.80 started
Note: We can't use DNA_struct_elem_find or get file version in init_structDNA,
so we are manually iterating over the array of the SDNA elements instead.
Note 2: This doversion change with renames can be reverted in a few months. But
so far it's required for 2.8 files created between October 2016 and now.
Reviewers: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D2927
|
|
This is a final step of having proper ownership. Now selecting different
layers in the "top bar" will actually do what this is expected to do.
Surely, there are still things to be done under the hood, that will happen
in a less intrusive way.
|
|
|
|
Engine is not stored in WorkSpaces. That defines the "context" engine, which
is used for the entire UI.
The engine used for the poll of nodes (add node menu, new nodes when "Use Nodes")
is obtained from context.
Introduce a ViewRender struct for viewport settings that are defined for
workspaces and scene. This struct will be populated with the hand-picked
settings that can be defined per workspace as per the 2.8 design.
* use_scene_settings
* properties editor: workshop + organize context path
Use Scene Settings
==================
For viewport drawing, Workspaces have an option to use the Scene render
settings (F12) instead of the viewport settings.
This way users can quickly preview the final render settings, engine and
View Layer. This will affect all the editors in that workspace, and it will be
clearly indicated in the top-bar.
Properties Editor: Add Workspace and organize context path
==========================================================
We now have the properties of:
Scene, Scene > Layer, Scene > World, Workspace
[Scene | Workspace] > Render Layer > Object
[Scene | Workspace] > Render Layer > Object > Data
(...)
Reviewers: Campbell Barton, Julian Eisel
Differential Revision: https://developer.blender.org/D2842
|
|
|
|
Baking rigid body cache was broken if some cached frames already
existed.
This is just a band aid for release, the logic need to be looked into
further.
|
|
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
|
|
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
|
|
|
|
|
|
These bits became obsolete with the new layer system, so we can
simplify some code around them or avoid existing workarounds which
were trying to keep things working for them.
There are still work needed to be done for on_visible_change to
avoid unnecessary updates, but that can also happen later.
|
|
|
|
Design Documents
----------------
* https://wiki.blender.org/index.php/Dev:2.8/Source/Layers
* https://wiki.blender.org/index.php/Dev:2.8/Source/DataDesignRevised
User Commit Log
---------------
* New Layer and Collection system to replace render layers and viewport layers.
* A layer is a set of collections of objects (and their drawing options) required for specific tasks.
* A collection is a set of objects, equivalent of the old layers in Blender. A collection can be shared across multiple layers.
* All Scenes have a master collection that all other collections are children of.
* New collection "context" tab (in Properties Editor)
* New temporary viewport "collections" panel to control per-collection
visibility
Missing User Features
---------------------
* Collection "Filter"
Option to add objects based on their names
* Collection Manager operators
The existing buttons are placeholders
* Collection Manager drawing
The editor main region is empty
* Collection Override
* Per-Collection engine settings
This will come as a separate commit, as part of the clay-engine branch
Dev Commit Log
--------------
* New DNA file (DNA_layer_types.h) with the new structs
We are replacing Base by a new extended Base while keeping it backward
compatible with some legacy settings (i.e., lay, flag_legacy).
Renamed all Base to BaseLegacy to make it clear the areas of code that
still need to be converted
Note: manual changes were required on - deg_builder_nodes.h, rna_object.c, KX_Light.cpp
* Unittesting for main syncronization requirements
- read, write, add/copy/remove objects, copy scene, collection
link/unlinking, context)
* New Editor: Collection Manager
Based on patch by Julian Eisel
This is extracted from the layer-manager branch. With the following changes:
- Renamed references of layer manager to collections manager
- I doesn't include the editors/space_collections/ draw and util files
- The drawing code itself will be implemented separately by Julian
* Base / Object:
A little note about them. Original Blender code would try to keep them
in sync through the code, juggling flags back and forth. This will now
be handled by Depsgraph, keeping Object and Bases more separated
throughout the non-rendering code.
Scene.base is being cleared in doversion, and the old viewport drawing
code was poorly converted to use the new bases while the new viewport
code doesn't get merged and replace the old one.
Python API Changes
------------------
```
- scene.layers
+ # no longer exists
- scene.objects
+ scene.scene_layers.active.objects
- scene.objects.active
+ scene.render_layers.active.objects.active
- bpy.context.scene.objects.link()
+ bpy.context.scene_collection.objects.link()
- bpy_extras.object_utils.object_data_add(context, obdata, operator=None, use_active_layer=True, name=None)
+ bpy_extras.object_utils.object_data_add(context, obdata, operator=None, name=None)
- bpy.context.object.select
+ bpy.context.object.select = True
+ bpy.context.object.select = False
+ bpy.context.object.select_get()
+ bpy.context.object.select_set(action='SELECT')
+ bpy.context.object.select_set(action='DESELECT')
-AddObjectHelper.layers
+ # no longer exists
```
|
|
This reverts commit 5aa19be91263a249ffae75573e3b32f24269d890 and b4a721af694817fa921b119df83d33ede7d7fed0.
Due to postponement of particle system rewrite it was decided to put particle code
back into the 2.8 branch for the time being.
|
|
This code obviously should also use the cache_fields flag variable,
like the code for reading the lowres data in the same function.
This is because fluid_fields actually represents the old state before
smoke was reallocated to match cache_fields read from the file, and if
it has some fields enabled that aren't allocated any more, it crashes.
This also fixes a reverse glitch: when a file was loaded with
the current frame in the middle of a baked smoke+fire simulation,
smoke appeared immediately, but the fire didn't until the frame
was changed. The reason is the same: after file load no fields
are initially allocated and thus fluid_fields is 0.
|
|
Point cache read code contains checks designed to prevent it reading
stale data when the relevant simulation code should instead compute
the next frame from the previous one. However in some situations like
motion blur subframes the simulation can't possibly do it and just
exits. This causes completely incorrect motion blur at or after the
last cached frame.
To fix, add a parameter that tells the cache code whether it should
apply the checks and exit, or read what it can even if stale (true
means exactly same as old behavior).
Doing this in cache rather than clamping the frame number better in
the caller lets it handle the case of incomplete cache that stops
before the official last frame.
Reviewed By: mont29, lukastoenne
Maniphest Tasks: T49004
Differential Revision: https://developer.blender.org/D2144
|
|
Commit rB709ca0ece changed how rotation was handled for particles so
that unless actual rotation physics is enabled, there is no rotation.
However it only updated ptcache_particle_read, forgetting to change
exactly the same code in ptcache_particle_interpolate.
This means that for subframes old code that computes a rotation from
velocity is used, resulting in completely different rotation than for
integer frames. This causes rotational motion blur by itself, and also
mangles motion blur paths of child particles.
Reviewers: sergey, lukastoenne
Maniphest Tasks: T45936
Differential Revision: https://developer.blender.org/D2124
|
|
|
