| Age | Commit message (Collapse) | Author |
|---|
|
`CD_LOCATION` was only used temporarily due to the lack
of a better alternative. This also removes the name from
`CD_LOCATION` again, because at most one layer of this
type should exist.
|
|
Clang Tidy reported a couple of false positives. I disabled
those `NOLINTNEXTLINE`.
Differential Revision: https://developer.blender.org/D8199
|
|
Every Particle Simulation node has a name (or a path when it is in a node group).
This name has to be used in the Simulation modifier on a point cloud to see
the particles.
Caching has been disabled for now, because it was holding back development
a bit. To reset the simulation, go back to frame 1.
Currently, there is no way to influence the simulation. There are just some
randomly moving points. Changing that is the next step.
|
|
|
|
Changed variable names from mmd, mds, mfs, and mes to fmd, fds, ffs, and fes. The author of this commits lights a candle for all the merge conflicts this will cause.
|
|
The new simulation type can also reference a point cache, but it is not an object.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D8097
|
|
This commit makes uses of the new OpenVDB IO in Mantaflow (introduced in 781f783a66ac).
From now on, fluid cache files in OpenVDB format will contain a list of grids per frame (before: one .vdb file per grid per frame). Besides regular grids, particle systems are also stored using OpenVDBs PointGrid data structures.
All older cache formats will remain fully functional:
- Uni caches (.uni) files are still available from the UI and can be used as before
- Raw caches (.raw) are no longer available from the UI, but loading them is still possible
- Old OpenVDB caches (one .vdb per grid) can no longer be baked either, but loading them is still possible.
It is also no longer possible to choose file formats for 'Noise' and 'Particles'. Instead there are now options to set the file format for 'Volumetric' and for 'Mesh' data.
Known issues (planned to be resolved soon):
- OpenVDB files are currently not taking into consideration the clipping value (FluidDomainSettings). Empty cells are therefore being written too. Depending on the scene, this can make file sizes unnecessarily large.
- Domains are not being exported at their world position. Instead they are always clipped to the origin.
|
|
Make it clear that this is the absolute path,
allow the 'name' to be renamed to 'filepath'.
Rename is safe since this is only for run-time.
|
|
When a fluid is put under influence of gravity or acceleration, it
forms an internal pressure gradient, which causes observable effects
like buoyancy. Since now cloth has support for simulating pressure
changes caused by fluid compression or expansion, it makes sense to
also support the effects of gravity.
This is intended for better simulation of objects filled or
surrounded by fluids, especially when constrained by collisions
or pinned vertices, and should result in more realistic shapes.
Obviously, this doesn't actually simulate fluid dynamics; instead
it is assumed that the fluid immediately adapts to changes in the
shape or acceleration of the object without friction or turbulence,
and instantly reaches a new static equilibrium.
Differential Revision: https://developer.blender.org/D6442
|
|
|
|
The current particle state is stored in a `CustomData` instance and
the cache is stored in `PointCache`.
The current state exists on the copy-on-write copies of the simulation,
while the cache only exists in the original data block.
This patch implements a temporary trivial particle simulation that does not
use the node system yet. It is used for testing and will be replaced soon.
`PointCache` still has some limitations that need to be overcome using
separate refactorings. For example, we need to be able to store the number
of particles in the point cache. Also we need to change which attributes
are stored for a particle system more dynamically than is currently possible afaik.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D7836
|
|
|
|
Use BLI_path_ prefix, more consistent names:
BLI_parent_dir -> BLI_path_parent_dir
BLI_parent_dir_until_exists -> BLI_path_parent_dir_until_exists
BLI_ensure_filename -> BLI_path_filename_ensure
BLI_first_slash -> BLI_path_slash_find
BLI_last_slash -> BLI_path_slash_rfind
BLI_add_slash -> BLI_path_slash_ensure
BLI_del_slash -> BLI_path_slash_rstrip
BLI_path_native_slash -> BLI_path_slash_native
Rename 'cleanup' to 'normalize', similar to Python's `os.path.normpath`.
BLI_cleanup_path -> BLI_path_normalize
BLI_cleanup_dir -> BLI_path_normalize_dir
BLI_cleanup_unc -> BLI_path_normalize_unc
BLI_cleanup_unc16 -> BLI_path_normalize_unc16
Clarify naming for extracting, creating numbered paths:
BLI_stringenc -> BLI_path_sequence_encode
BLI_stringdec -> BLI_path_sequence_decode
Part of T74506 proposal.
|
|
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
|
|
The files are now split up into the following sections:
- `BKE_anim_path.h` and `anim_path.c` for path/curve functions.
- `BKE_anim_visualization.h` and `anim_visualizationanim_path.c` for
animation visualization (mostly motion paths).
- `BKE_duplilist.h` for DupliList function declarations. These were
already implemented in `object_dupli.c`, so they were rather out of
place being declared in `BKE_anim.h` in the first place.
No functional changes.
|
|
|
|
Unlike Linux where fseek/tell will be either 32 or 64 bit
depending on the target platform, it will always be 32 bit
on windows.
We had some macro magic in BLI_winstuff.h that substituted
them for 64 bit versions, but that is upsetting the system
headers if they get included after BLI_winstuff.h which
is problematic for D6811.
This diff adds proper functions in blenlib and updates
all calls that were using the BLI_winstuff.h header to
gain 64 bit file IO.
note: Anything that was using the 32 bit versions (ie not
including BLI_winstuff.h) will still be using the 32 bit
versions, which is perhaps a good code quality Friday project.
Differential Revision: https://developer.blender.org/D7160
Reviewers: brecht dfelinto
|
|
|
|
Note that `BKE_library.h`/`library.c` were renamed to
`BKE_lib_id.h`/`lib_id.c` to avoid having a too generic name here.
Part of T72604.
|
|
A collection of smaller changes that are required in the /blender/source files. A lot of them are also due to variable renaming.
Reviewed By: sergey
Maniphest Tasks: T59995
Differential Revision: https://developer.blender.org/D3855
|
|
Show all memory-related byte size strings calculated with a base of 1024.
Differential Revision: https://developer.blender.org/D5714
Reviewed by Brecht Van Lommel
|
|
|
|
Issue was exposed by recent own rB03bf84db86b commit, but was actually
present in RNA API for PointCaches since (probably) ages: whole accessor
code here was assuming that owner ID was an Object, when it is actually
a scene for RigidBody simulations...
Had also to make `BKE_ptcache_id_find()` and friends a bit more
flexible, now they also accept a NULL object pointer parameter...
|
|
Some statements were split across multiple lines because of their
trailing comments.
In most cases it's clearer to put the comments above.
|
|
i18n code does not work from threads on some plaforms, so it is disabled
in Blender when called from non-main thread.
Means that we have to go to a slightly different approach, with dirty
tag and generating string on request for UI.
Note: Also had to update the `info` string size, to fit with expensive
asiatic scripts in utf-8... Using mem for that kind of runtime data is
not really nice, but for now it will have to do.
|
|
Thanks to @sybren for pointing out issue from 299ff91ea1fe5
|
|
Differential Revision: https://developer.blender.org/D3744
|
|
Update the default init step values to be the same for all caches.
This is actually a small hack as these values are not used on the
creation of the first cache. But the default init value is 1, so this
will not be noticeable anymore.
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D5271
|
|
|
|
Cheap tip: anything that is not "Camel Case" and/or that is more than
a few words long should use `TIP_` translation, not `IFACE_` one.
Also added several missing strings (including the one reported in D5056
by Jean First (@robbott), thanks).
|
|
Prepare for enabling ReflowComments.
|
|
|
|
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
Make sure we don't reallocate arrays in the pointcache when not needed, the
size of a memory allocation can be slightly bigger than the requested size.
Also, use consistent check for shared cached in copy and free functions.
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
|
|
Done for smoke functions.
Smoke modifier functions seems an oddballs here,
but probably also to be renamed.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
Needed for clan-format not to wrap onto one line.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Part of D4277 by @sobakasu
|
|
|
|
Not only were those often making doublons with already existing
BLI_math's stuff, but they were also used to hide implicit type
conversions...
As usual this adds some more exotic inlined vector functions (one of
the rare cases where I really miss C++ and its templates... ;) ).
|
|
Prevents clang-format merging into a single line.
|
|
There were at least three copies of those:
- OB_RECALC* family of flags, which are rudiment of an old
dependency graph system.
- PSYS_RECALC* which were used by old dependency graph system
as a separate set since the graph itself did not handle
particle systems.
- DEG_TAG_* which was used to tag IDs.
Now there is a single set, which defines what can be tagged
and queried for an update. It also has some aggregate flags
to make queries simpler.
Lets once and for all solve the madness of those flags, stick
to a single set, which will not overlap with anything or require
any extra conversion.
Technically, shouldn't be measurable user difference, but some
of the agregate flags for few dependency graph components did
change.
Fixes T58632: Particle don't update rotation settings
|
|
This partially reverts 9edc64e255b. If tag is needed, do it outside of
dependency graph evaluation.
|
|
|
|
|
