Age | Commit message (Collapse) | Author |
|
|
|
Conflicts:
source/blender/blenkernel/intern/rigidbody.c
|
|
The old springs with damping 1.0 operate in a special way that
is more similar to plastic deformation than a spring. Some users
rely on that, so let the user choose which implementation to use.
This also restores full backward compatibility with 2.79.
Reviewers: sergof
Differential Revision: https://developer.blender.org/D3544
|
|
|
|
To prevent the pointcache from being copied-on-write too (and requiring
copying back), the cache is now shared between the original and
evaluated scenes. Reading from the cache is always allowed; running the
sim and writing to the cache is only allowed when the depsgraph is
active.
Some pointers have moved from RigidBodyWorld (RBO) to
RigidBodyWorldShared (RBOS). writefile.c copies some pointers back from
RBOS to RBO so that the file can still be opened on older Blenders
without crashing on a segfault.
The RigidBodyWorldShared struct is written to the blend file, because it
refers to the PointCache ID block.
The RigidObjectShared struct is runtime-only, and thus not saved to the
blend file.
An RNA getter-function is used to hide the new 'shared' pointer. As a
result the Python API hasn't changed.
Reviewed by: campbellbarton
Differential Revision: https://developer.blender.org/D3508
|
|
|
|
Same reasoning as effector relations in earlier commit.
|
|
|
|
|
|
|
|
To find all effectors in the scene, we need to loop over all objects.
Doing this during depsgraph evaluation caused crashes because not all
objects are guaranteed to be evaluated yet.
To fix this, we now cache the relations as part of the dependency graph
build. As a bonus this also makes evaluation faster for big scenes,
since looping over all objects for each particle system is slow.
Fixes T55156.
|
|
|
|
I moved some code from ED_rigidbody_object_remove() to
BKE_rigidbody_remove_object(), so that calling the latter doesn't leave
the object in rbw->group (causing a crash later on when rebuilding the
depsgraph).
|
|
This was caused by a floating point comparison using ==, instead of using
compare_ff_relative().
|
|
This makes it possible to perform re-evaluation of the scene without
having to re-run the simulation.
The CoW → Orig copy is only performed when the depsgraph is active, so
as to not influence the current scene while rendering in the background.
Alternatively, we could have the CoW copy share the cache with the
original to prevent too much copying of cache data. This will be faster,
but I'm not sure whether we can reliably check the DEG_is_active()
status at CoW copy creation time.
|
|
|
|
|
|
|
|
For physics simulation it's still fuzzy though, but this needs bigger
design for how it works with view layers and visibility.
|
|
|
|
|
|
|
|
This commit contains the minimum to make clang build/work with blender, asan and ninja build support is forthcoming
Things to note:
1) Builds and runs, and is able to pass all tests (except for the freestyle_stroke_material.blend test which was broken at that time for all platforms by the looks of it)
2) It's slightly faster than msvc when using cycles. (time in seconds, on an i7-3370)
victor_cpu
msvc:3099.51
clang:2796.43
pavillon_barcelona_cpu
msvc:1872.05
clang:1827.72
koro_cpu
msvc:1097.58
clang:1006.51
fishy_cat_cpu
msvc:815.37
clang:722.2
classroom_cpu
msvc:1705.39
clang:1575.43
bmw27_cpu
msvc:552.38
clang:561.53
barbershop_interior_cpu
msvc:2134.93
clang:1922.33
3) clang on windows uses a drop in replacement for the Microsoft cl.exe (takes some of the Microsoft parameters, but not all, and takes some of the clang parameters but not all) and uses ms headers + libraries + linker, so you still need visual studio installed and will use our existing vc14 svn libs.
4) X64 only currently, X86 builds but crashes on startup.
5) Tested with llvm/clang 6.0.0
6) Requires visual studio integration, available at https://github.com/LazyDodo/llvm-vs2017-integration
7) The Microsoft compiler spawns a few copies of cl in parallel to get faster build times, clang doesn't, so the build time is 3-4x slower than with msvc.
8) No openmp support yet. Have not looked at this much, the binary distribution of clang doesn't seem to include it on windows.
9) No ASAN support yet, some of the sanitizers can be made to work, but it was decided to leave support out of this commit.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D3304
|
|
There are still probably other massive problems to solve (i.e. which copies
of data cache/sim gets written/read from for COW eval) that need to be solved
before we can get the sims actually running though.
|
|
OVERVIEW
* In 2.7 terminology, all layers and groups are now collection datablocks.
* These collections are nestable, linkable, instanceable, overrideable, ..
which opens up new ways to set up scenes and link + override data.
* Viewport/render visibility and selectability are now a part of the collection
and shared across all view layers and linkable.
* View layers define which subset of the scene collection hierarchy is excluded
for each. For many workflows one view layer can be used, these are more of an
advanced feature now.
OUTLINER
* The outliner now has a "View Layer" display mode instead of "Collections",
which can display the collections and/or objects in the view layer.
* In this display mode, collections can be excluded with the right click menu.
These will then be greyed out and their objects will be excluded.
* To view collections not linked to any scene, the "Blender File" display mode
can be used, with the new filtering option to just see Colleciton datablocks.
* The outliner right click menus for collections and objects were reorganized.
* Drag and drop still needs to be improved. Like before, dragging the icon or
text gives different results, we'll unify this later.
LINKING AND OVERRIDES
* Collections can now be linked into the scene without creating an instance,
with the link/append operator or from the collections view in the outliner.
* Collections can get static overrides with the right click menu in the outliner,
but this is rather unreliable and not clearly communicated at the moment.
* We still need to improve the make override operator to turn collection instances
into collections with overrides directly in the scene.
PERFORMANCE
* We tried to make performance not worse than before and improve it in some
cases. The main thing that's still a bit slower is multiple scenes, we have to
change the layer syncing to only updated affected scenes.
* Collections keep a list of their parent collections for faster incremental
updates in syncing and caching.
* View layer bases are now in a object -> base hash to avoid quadratic time
lookups internally and in API functions like visible_get().
VERSIONING
* Compatibility with 2.7 files should be improved due to the new visibility
controls. Of course users may not want to set up their scenes differently
now to avoid having separate layers and groups.
* Compatibility with 2.8 is mostly there, and was tested on Eevee demo and Hero
files. There's a few things which are know to be not quite compatible, like
nested layer collections inside groups.
* The versioning code for 2.8 files is quite complicated, and isolated behind
#ifdef so it can be removed at the end of the release cycle.
KNOWN ISSUES
* The G-key group operators in the 3D viewport were left mostly as is, they
need to be modified still to fit better.
* Same for the groups panel in the object properties. This needs to be updated
still, or perhaps replaced by something better.
* Collections must all have a unique name. Less restrictive namespacing is to
be done later, we'll have to see how important this is as all objects within
the collections must also have a unique name anyway.
* Full scene copy and delete scene are exactly doing the right thing yet.
Differential Revision: https://developer.blender.org/D3383
https://code.blender.org/2018/05/collections-and-groups/
|
|
Currently only affects EVALUATION debug messages, rest are to be
supported on per-depsgraph level.
|
|
Folders removed entirely:
* //extern/recastnavigation
* //intern/decklink
* //intern/moto
* //source/blender/editors/space_logic
* //source/blenderplayer
* //source/gameengine
This includes DNA data and any reference to the BGE code in Blender itself.
We are bumping the subversion.
Pending tasks:
* Tile/clamp code in image editor draw code.
* Viewport drawing code (so much of this will go away because of BI removal
that we can wait until then to remove this.
|
|
The depsgraph was always created within a fixed evaluation context. Passing
both risks the depsgraph and evaluation context not matching, and it
complicates the Python API where we'd have to expose both which is not so
easy to understand.
This also removes the global evaluation context in main, which assumed there
to be a single active scene and view layer.
Differential Revision: https://developer.blender.org/D3152
|
|
|
|
The new constraint is slower and not backward compatible, but should
be better, especially in the damping side. The new constraint also
has a different valid range of the damping coefficient, and a limit
implementation that bounces instead of making the object stationary.
Reviewers: sergof
Differential Revision: https://developer.blender.org/D3125
|
|
|
|
This way we can easily control format and keep it consistent.
And also possibly do other trickery, like coloring addresses!
|
|
- put render iterator in own scope
(would shadow it's own variable if used multiple times).
- enforce semicolon at end of iterator macros.
- no need to typedef one-off macro structs.
|
|
|
|
|
|
Now it's possible to have debug messages for following things:
- Graph construction
- Graph evaluation
- Graph tagging
|
|
|
|
|
|
Since we are ditching layers from Blender (2.8) we need a replacement to
control groups visibility. This commit introduces collections as the building
blocks for groups, allowing users to control visibility as well as overrides
for groups.
Features
========
* Groups now have collections
This way you can change the visibility of a collection inside a group, and add
overrides which are part of the group and are prioritized over other overrides.
* Outliner
Groups can inspect their collections, change visibility, and add/remove members.
To change an override of a group collection, you need to select an instance of
the group, and then you can choose "group" in the collection properties editor
to edit this group active collection instead of the view layer one.
* Dupli groups overrides
We can now have multiple instances of the same group with an original "override"
and different overrides depending on the collection the instanced object is part
of.
Technical
=========
* Layers
We use the same api for groups and scene as much as possible.
Reviewers: sergey (depsgraph), mont29 (read/write and user count)
Differential Revision: https://developer.blender.org/D2892
|
|
|
|
break the simulation
Revert 9cd6b03, 3edc8c1, b87d10d and do a better fix for T50230.
|
|
2.8x branch added bContext arg in many places,
pass eval-context instead since its not simple to reason about what
what nested functions do when they can access and change almost anything.
Also use const to prevent unexpected modifications.
This fixes crash loading files with shadows,
since off-screen buffers use a NULL context for rendering.
|
|
|
|
That one was doing exactly same thing as `dm->getLoopTriArray()`, no
point in having twice the same code here...
|
|
Stupid git handles merges terribly when there are conflicts and branch
is modified buring merge process... :((((
|
|
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
|
|
|
|
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
|
|
|
|
Note that some little parts of code have been dissabled because eval_ctx
was not available there. This should be resolved once DerivedMesh is
replaced.
|