Age | Commit message (Collapse) | Author |
|
|
|
from Lawrence D'Oliveiro (ldo)
notes from tracker:
use bool for return type from BLI_remlink_safe, necessitating including BLI_utildefines.h in BLI_listbase.h
get rid of duplicate BLI_insertlink, use BLI_insertlinkafter instead.
A few places which were using BLI_insertlinkafter (actually BLI_insertlink), when it would be simpler to use BLI_insertlinkbefore instead.
|
|
|
|
name of a state is the name of the top controller of this state)
review and small tweaks by Campbell Barton
|
|
|
|
BKE_utildefines is now unused but keep incase we want to add defines there later.
|
|
|
|
|
|
else if's
|
|
Also adds DampedTrackTo to the list of supported constraints in the BGE
Test file:
http://www.pasteall.org/blend/11715
Patch developed as part of a project to NF-UBC Nereus Program.
Development time 'sponsored' by the project.
www.nereusprogram.org
|
|
The camera actuator only allows to look the object from its front face.
Given that Blender takes -Y as the default forward orientation, the current
functionality doesn't let a camera to track an actor from behind.
This patch allows for -X and -Y axis tracking. This way a camera over the
shoulders of a character is possible (without resorting to rotate the
mesh/armature original orientation.
- patch reviewed by Campbell Barton, thanks
|
|
http://markmail.org/message/fp7ozcywxum3ar7n
|
|
|
|
https://svn.blender.org/svnroot/bf-blender/trunk/blender
|
|
##########
original name: "Allow to change the strenght of the "go behind" constraint of the camera actuator"
The camera actuator is an actuator that drive the camera to follow an object, with a set of constraint.
Currently, when the object followed rotate on himself (like a person, or an helicopter), the camera is really slow to go behind (at least 10 seconds).
This patch gives the UI to tweak the strenght of the 'go behind'[named damping] constraint.
###########
epydocs (rst) updated too
|
|
|
|
|
|
|
|
|
|
|
|
python functions.
- use NULL rather then 0 where possible (makes code & function calls more readable IMHO).
- set static variables and functions (exposed some unused vars/funcs).
- use func(void) rather then func() for definitions.
|
|
set_sca_new_poins_ob() as pointed out by Dalai.
|
|
|
|
|
|
|
|
- fixed order of triangle indexes for navigation mesh representation
|
|
(not sure it booms in any compiler, but it doesn't hurt to make it right)
|
|
|
|
|
|
After initial talk with Matt (awhile ago) we realzed that rna_api would fit well for this instead of an operator.
The next step would be to move the current UI code to use the rna funcs instead.
Note: it takes the s/c/a as argument, not its name. (e.g. cont.link(actuator=act) )
Sample code to link all the logic bricks between each other:
ob = bpy.context.object
for cont in ob.game.controllers:
for sens in ob.game.sensors:
cont.link(sensor=sens)
for act in ob.game.actuators:
cont.link(actuator=act)
For a script to create bricks, link bricks, unlink bricks and remove them:
http://www.pasteall.org/14266
|
|
Tchatcharantcharan ...
Three new operators:
bpy.ops.logic.sensor_move
bpy.ops.logic.controller_move
bpy.ops.logic.actuator_move
direction is a parameter (UP,DOWN)
Moved some interface code to sca.c instead of logic_window.c. (and changed accordingly).
One note: as in 2.49, the move up/down button is only available in non-expanded mode. However instead of one button with two options we have 2 buttons (as we had originally in 2.50).
That also means the s/c/a header is getting more clunky. Design, thoughts, ideas are appreciated. For the time been functionality back is still the priority (mine at least ;)
|
|
- added debug visualization for object velocities
|
|
|
|
following; renamed KX_Pathfinder to KX_NavMeshObject
|
|
("bug" from 2.49)
|
|
there are some cases (i.e. Constraint Actuator) where the same DNA property is being used by different RNAs with different ranges.
It's easy to change (reset the values to their default in the set func of the constrant type rna).
Not sure it's necessary though.
|
|
124-126 but isnt used by any build systems now.
|
|
|
|
|
|
|
|
from Camera objects.
(if you want to mark your camera objects create a property manually ;)
That way object.getPropertyNames() works consistently across all object types.
|
|
Makefile updated but not tested. Comes with Eigen2 2.0.6 C++ matrix library.
|
|
Make local and make single user are back for ID template.
Internally these calls got unified, id_make_local and
id_copy are now used to do these operations for all types
that support it. Also reveals that for some ID types the
implementation is still missing.
Further, some small changes:
* unlink_text is now in blenkernel.
* copy_group was implemented.
* ID template now has an open operator again.
* fix preview to not change material reference count,
even if temporary it shows up with threaded preview.
* id_unlink unifies unlink for text, object and group.
|
|
|
|
* Removed CD Actuator
* Removed bSample and bSoundListener
* Removed SoundSystem
* Removed -noaudio parameter
|
|
See mailing list for additional information.
|
|
svn merge https://svn.blender.org/svnroot/bf-blender/trunk/blender -r19820:HEAD
Notes:
* Game and sequencer RNA, and sequencer header are now out of date
a bit after changes in trunk.
* I didn't know how to port these bugfixes, most likely they are
not needed anymore.
* Fix "duplicate strip" always increase the user count for ipo.
* IPO pinning on sequencer strips was lost during Undo.
|
|
svn merge https://svn.blender.org/svnroot/bf-blender/trunk/blender -r12987:17416
Issues:
* GHOST/X11 had conflicting changes. Some code was added in 2.5, which was
later added in trunk also, but reverted partially, specifically revision
16683. I have left out this reversion in the 2.5 branch since I think it is
needed there.
http://projects.blender.org/plugins/scmsvn/viewcvs.php?view=rev&root=bf-blender&revision=16683
* Scons had various conflicting changes, I decided to go with trunk version
for everything except priorities and some library renaming.
* In creator.c, there were various fixes and fixes for fixes related to the -w
-W and -p options. In 2.5 -w and -W is not coded yet, and -p is done
differently. Since this is changed so much, and I don't think those fixes
would be needed in 2.5, I've left them out.
* Also in creator.c: there was code for a python bugfix where the screen was not
initialized when running with -P. The code that initializes the screen there
I had to disable, that can't work in 2.5 anymore but left it commented as a
reminder.
Further I had to disable some new function calls. using src/ and python/, as
was done already in this branch, disabled function calls:
* bpath.c: error reporting
* BME_conversions.c: editmesh conversion functions.
* SHD_dynamic: disabled almost completely, there is no python/.
* KX_PythonInit.cpp and Ketsji/ build files: Mathutils is not there, disabled.
* text.c: clipboard copy call.
* object.c: OB_SUPPORT_MATERIAL.
* DerivedMesh.c and subsurf_ccg, stipple_quarttone.
Still to be done:
* Go over files and functions that were moved to a different location but could
still use changes that were done in trunk.
|
|
Introduction of a new Delay sensor that can be used to
generate positive and negative triggers at precise time,
expressed in number of frames.
The delay parameter defines the length of the initial
OFF period. A positive trigger is generated at the end
of this period. The duration parameter defines the
length of the ON period following the OFF period.
A negative trigger is generated at the end of the ON period.
If duration is 0, the sensor stays ON and there is no
negative trigger.
The sensor runs the OFF-ON cycle once unless the repeat
option is set: the OFF-ON cycle repeats indefinately
(or the OFF cycle if duration is 0).
The new generic SCA_ISensor::reset() Python function
can be used at any time to restart the sensor: the
current cycle is interrupted and no trigger is generated.
|
|
actuator, new orientation constraint actuator, new actuator sensor.
General
=======
- Removal of Damp option in motion actuator (replaced by
Servo control motion).
- No PyDoc at present, will be added soon.
Generalization of the Lvl option
================================
A sensor with the Lvl option selected will always produce an
event at the start of the game or when entering a state or at
object creation. The event will be positive or negative
depending of the sensor condition. A negative pulse makes
sense when used with a NAND controller: it will be converted
into an actuator activation.
Servo control motion
====================
A new variant of the motion actuator allows to control speed
with force. The control if of type "PID" (Propotional, Integral,
Derivate): the force is automatically adapted to achieve the
target speed. All the parameters of the servo controller are
configurable. The result is a great variety of motion style:
anysotropic friction, flying, sliding, pseudo Dloc...
This actuator should be used in preference to Dloc and LinV
as it produces more fluid movements and avoids the collision
problem with Dloc.
LinV : target speed as (X,Y,Z) vector in local or world
coordinates (mostly useful in local coordinates).
Limit: the force can be limited along each axis (in the same
coordinates of LinV). No limitation means that the force
will grow as large as necessary to achieve the target
speed along that axis. Set a max value to limit the
accelaration along an axis (slow start) and set a min
value (negative) to limit the brake force.
P: Proportional coefficient of servo controller, don't set
directly unless you know what you're doing.
I: Integral coefficient of servo controller. Use low value
(<0.1) for slow reaction (sliding), high values (>0.5)
for hard control. The P coefficient will be automatically
set to 60 times the I coefficient (a reasonable value).
D: Derivate coefficient. Leave to 0 unless you know what
you're doing. High values create instability.
Notes: - This actuator works perfectly in zero friction
environment: the PID controller will simulate friction
by applying force as needed.
- This actuator is compatible with simple Drot motion
actuator but not with LinV and Dloc motion.
- (0,0,0) is a valid target speed.
- All parameters are accessible through Python.
Distance constraint actuator
============================
A new variant of the constraint actuator allows to set the
distance and orientation relative to a surface. The controller
uses a ray to detect the surface (or any object) and adapt the
distance and orientation parallel to the surface.
Damp: Time constant (in nb of frames) of distance and
orientation control.
Dist: Select to enable distance control and set target
distance. The object will be position at the given
distance of surface along the ray direction.
Direction: chose a local axis as the ray direction.
Range: length of ray. Objecgt within this distance will be
detected.
N : Select to enable orientation control. The actuator will
change the orientation and the location of the object
so that it is parallel to the surface at the vertical
of the point of contact of the ray.
M/P : Select to enable material detection. Default is property
detection.
Property/Material: name of property/material that the target of
ray must have to be detected. If not set, property/
material filter is disabled and any collisioning object
within range will be detected.
PER : Select to enable persistent operation. Normally the
actuator disables itself automatically if the ray does
not reach a valid target.
time : Maximum activation time of actuator.
0 : unlimited.
>0: number of frames before automatic deactivation.
rotDamp: Time constant (in nb of frame) of orientation control.
0 : use Damp parameter.
>0: use a different time constant for orientation.
Notes: - If neither N nor Dist options are set, the actuator
does not change the position and orientation of the
object; it works as a ray sensor.
- The ray has no "X-ray" capability: if the first object
hit does not have the required property/material, it
returns no hit and the actuator disables itself unless
PER option is enabled.
- This actuator changes the position and orientation but
not the speed of the object. This has an important
implication in a gravity environment: the gravity will
cause the speed to increase although the object seems
to stay still (it is repositioned at each frame).
The gravity must be compensated in one way or another.
the new servo control motion actuator is the simplest
way: set the target speed along the ray axis to 0
and the servo control will automatically compensate
the gravity.
- This actuator changes the orientation of the object
and will conflict with Drot motion unless it is
placed BEFORE the Drot motion actuator (the order of
actuator is important)
- All parameters are accessible through Python.
Orientation constraint
======================
A new variant of the constraint actuator allows to align an
object axis along a global direction.
Damp : Time constant (in nb of frames) of orientation control.
X,Y,Z: Global coordinates of reference direction.
time : Maximum activation time of actuator.
0 : unlimited.
>0: number of frames before automatic deactivation.
Notes: - (X,Y,Z) = (0,0,0) is not a valid direction
- This actuator changes the orientation of the object
and will conflict with Drot motion unless it is placed
BEFORE the Drot motion actuator (the order of
actuator is important).
- This actuator doesn't change the location and speed.
It is compatible with gravity.
- All parameters are accessible through Python.
Actuator sensor
===============
This sensor detects the activation and deactivation of actuators
of the same object. The sensor generates a positive pulse when
the corresponding sensor is activated and a negative pulse when
it is deactivated (the contrary if the Inv option is selected).
This is mostly useful to chain actions and to detect the loss of
contact of the distance motion actuator.
Notes: - Actuators are disabled at the start of the game; if you
want to detect the On-Off transition of an actuator
after it has been activated at least once, unselect the
Lvl and Inv options and use a NAND controller.
- Some actuators deactivates themselves immediately after
being activated. The sensor detects this situation as
an On-Off transition.
- The actuator name can be set through Python.
|