| Age | Commit message (Collapse) | Author |
|---|
|
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
- Minor improvements to doc-strings.
Ref T92709
|
|
|
|
The main goal of this refactor is to make BPath module use `IDTypeInfo`,
and move each ID-specific part of the `foreach_path` looper into their
own IDTypeInfo struct, using a new `foreach_path` callback.
Additionally, following improvements/cleanups are included:
* Attempt to get better, more consistent namings.
** In particular, move from `path_visitor` to more standard `foreach_path`.
* Update and extend documentation.
** API doc was moved to header, according to recent discussions on this
topic.
* Remove `BKE_bpath_relocate_visitor` from API, this is specific
callback that belongs in `lib_id.c` user code.
NOTE: This commit is expected to be 100% non-behavioral-change. This
implies that several potential further changes were only noted as
comments (like using a more generic solution for
`lib_id_library_local_paths`, addressing inconsistencies like path of
packed libraries always being skipped, regardless of the
`BKE_BPATH_FOREACH_PATH_SKIP_PACKED` `eBPathForeachFlag` flag value,
etc.).
NOTE: basic unittests were added to master already in
rBdcc500e5a265093bc9cc.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13381
|
|
Two issues addressed here:
I) `asset_type_info` is sub-data, not a callback. Therefore, move it
before the callbacks in the `IDTypeInfo` struct.
II) More important, initialize this new attribute in *ALL* `IDTypeInfo`
instances. No member of this struct should ever be left implicitely
uninitilazed, ever.
Aftermath of rBa84f1c02d251.
|
|
|
|
|
|
Dummy mistake in rBc8c53ceecc30 (boolean inversion).
|
|
rB43bc494892c3 switched `BKE_libblock_relink_to_newid` to use new ID
remapping and libquery code.
However, that new code does protect by default against remapping an
objects's data pointer when that object is in Edit mode, since this is
not a behavior that generic BKE code can handle (due to required editing
data for most obdata types when in edit mode).
So specific code that does create new IDs and need remapping in Edit
mode has to pass specific exception flags to remaping code.
This commit adds those remapping flags to `BKE_libblock_relink_to_newid`
and add said exception flag to the remapping call from
`ED_object_add_duplicate` when the object is in edit mode.
|
|
Forgot that scene uses part of its ID looping code for specific undo
handling.
Caused by rBe3b2f0fd6ff9.
|
|
Those were used in a very few places to detect whether iteration should
be stopped or not, but one can use `BKE_lib_query_foreachid_iter_stop`
now for that.
Also fix early break handling in embedded IDs processing.
Fix T90922: Fix return policy inconsistency in `scene_foreach_id`.
|
|
The new `BKE_LIB_FOREACHID_PROCESS_FUNCTION_CALL` execute the given
statement and then check status of `LibraryForeachIDData` data, and
return in case stop of iteration is requested.
This is very similar to the other `BKE_LIB_FOREACHID_PROCESS_` existing
macros, and allows us to properly break iteration when a sub-function
has requested it.
Part of T90922: Fix return policy inconsistency in `scene_foreach_id`.
|
|
Move all usages to new `BKE_libblock_relink_to_newid_new`, and rename
that one to `BKE_libblock_relink_to_newid`.
Fix T91413.
|
|
`FOREACHID_PROCESS_IDSUPER`.
Follow-up of rBf11ed418e5fa.
|
|
`BKE_LIB_FOREACHID_PROCESS_IDSUPER`.
More in-line name with the rest of that macro-based API, especially
since this will be extended in the future.
|
|
issues
Some compositing applications do not support spaces and dots in layer names, and change
these to other symbols on import. This causes various compatibility issues, including
with Cryptomatte metadata. While technically those could be considered bugs in the
Cryptomatte implementation of other software, where they are not properly accounting for
that layer renaming, it's not ideal.
The OpenEXR channel naming convention is "layer.pass.channel". We get away with dots in
the layer name since we parse this from right to left, but it's a weak assumption.
Now we don't forbid using spaces or dots, and existing files are unchanged. But at
least by default names will be compatible, and hopefully other software catches up in
time to support more flexible layer names.
Ref T68924
|
|
The Alembic/CacheFile modifier supports Cycles procedurals when Cycles
is configured to use experimental features; the check for this would
segfault on builds with `WITH_CYCLES=OFF`. This is now fixed by adding
an extra NULL check.
|
|
Handling of RigidBody data in duplicate of scenes/collections was very
wrong. This commit:
- Add handling of duplication of RB collections when fully duplicating
a scene.
- Fix Object duplication trying to add duplicated RB objects to
matching RBW collections.
While the later behavior is desired when only duplicated objects, when
duplicating their collections and/or scenes it is actually very bad, as
it would add back new object duplicates to old (RBW) collections.
|
|
Differential Revision: https://developer.blender.org/D12661
|
|
This is a follow up to 8fecc2a8525467ee2fbbaae16ddbbc10b3050d46.
This makes sure future .blend files that have more channels than the
limit won't break Blender.
It can be backported to LTS.
This is part of https://developer.blender.org/D12645
Differential Revision: https://developer.blender.org/D12648
|
|
|
|
|
|
We now use a for_each function with callback to iterate through all sequences in the scene.
This has the benefit that we now only loop over the sequences in the scene once.
Before we would loop over them twice and allocate memory to store temporary data.
The allocation of temporary data lead to unintentional memory leaks if the code used returns to exit out of the iteration loop.
The new for_each callback method doesn't allocate any temporary data and only iterates though all sequences once.
Reviewed By: Richard Antalik, Bastien Montagne
Differential Revision: http://developer.blender.org/D12278
|
|
We need to separate the flag telling duplicate code to not handle
remapping to new IDs etc., from the one telling the code that we are
currently duplicating a 'root' ID (i.e. not a dependency of another
duplicated ID).
This whole duplicate code/logic is still fairly unsatisfying, think it
will need further refactor, or maybe even re-design, at some point...
|
|
Simplify logic of speed effect frame calculation by using discrete math
where possible. Only `SEQ_SPEED_MULTIPLY` mode with animation requires
frame map to be built. Frame map building was simplified by removing
unused branches.
Functional change: Animating strip in negative range will reverse playback.
I assume this was limitation of previous system, where each frame map item
was limited to be within correct frame range. Now frame map can contain
values that point beyond usable range and they are limited by
`seq_speed_effect_target_frame_get`. This way it is possible to control
playback rate in both directions.
Mostly fixes T89120 apart from offset handling.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11939
|
|
This patch exposes the Cycles Alembic Procedural through the MeshSequenceCache
modifier in order to use and test it from Blender.
To enable it, one has to switch the render feature set to experimental and
activate the Procedural in the modifier. An Alembic Procedural is then
created for each CacheFile from Blender set to use the Procedural, and each
Blender object having a MeshSequenceCache modifier is added to list of objects
of the right procedural.
The procedural's parameters derive from the CacheFile's properties which are
already exposed in the UI through the modifier, although more Cycles specific
options might be added in the future.
As there is currently no cache controls and since we load all the data at the
beginning of the render session, the procedural is only available during
viewport renders at the moment. When an Alembic procedural is rendered, data
from the archive are not read on the Blender side.
If a Cycles render is not active and the CacheFile is set to use the Cycles Procedural,
bounding boxes are used to display the objects in the scene as a signal that the
objects are not processed by Blender anymore. This is standard in other DCCs.
However this does not reduce the memory usage from Blender as the Alembic data
was already loaded either during an import or during a .blend file read.
This is mostly a hack to test the Cycles Alembic procedural until we have a
better Blender side mechanism for letting renderers load their own geometry,
which will be based on import and export settings on Collections (T68933).
Ref T79174, D3089
Reviewed By: brecht, sybren
Maniphest Tasks: T79174
Differential Revision: https://developer.blender.org/D10197
|
|
ID data-blocks that could be accessed from Python and weren't freed
using BKE_id_free_ex did not release the Python reference count.
Add BKE_libblock_free_data_py function to clear the Python reference
in this case.
Add asserts to ensure no Python reference is held in situations
when ID's are copied for internal use (not exposed through the RNA API),
to ensure these kinds of leaks don't go by unnoticed again.
|
|
This function doesn't free the collection, only it's memory.
|
|
|
|
This makes the internal naming consistent with the public API. And also gives
us a visibility_flag rather than restrictflag that can be extended with more
flags.
|
|
Snapping by default goes against convention, so this setting was
re-evaluated. Also snapping by default can conflict with new image
transform system, see T90156
There wasn't consensus, so disable snapping by default to follow
established convention.
ref T89665
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12054
|
|
While doxygen supports both, conform to our style guide.
Note that single back-tick's are already used in a majority of comments.
|
|
In this bug report it resulted in rendering animations stopping too early,
but this affected more areas.
After the previous cleanup commit, it becomes clear that frame and ctime
values were mixed up.
|
|
Confusingly, BKE_scene_frame_get did not match the frame number as expected by
BKE_scene_frame_set. Instead it return the value after time remapping, which
is commonly named "ctime".
* Rename BKE_scene_frame_get to BKE_scene_ctime_get
* Add a new BKE_scene_frame_get that matches BKE_scene_frame_set
* Use int/float depending if fractional frame is expected
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
Change snapping behavior to snap strip edges when they are close to snap point.
Default behavior is, that each transformed strip is snapped to any other strip.
Implement snapping controls in sequencer tool settings. These controls include:
- Snapping on/off
- Ability to snap to playhead and strip hold offset points
- Filter snap points by excluding sound or muted strips
- Control snapping distance
Snapping controls are placed in timeline header similar to 3D viewport
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11646
|
|
|
|
|
|
|
|
Use lookup string callback function for `sequences_all` RNA property
`rna_SequenceEditor_sequences_all_lookup_string` using a GHash for faster lookups.
When names are changed or strips are added/removed the lookup is tagged invalid.
The next time the lookup is used it will rebuild it.
Reviewed By: sergey, jbakker
Differential Revision: https://developer.blender.org/D11544
|
|
Note that these changes are limited simple cases as these kinds of
changes could allow for errors when refactoring code when the known
state is not so obvious.
|
|
It wasn't obvious this function cleared the tag as well.
|
|
This patch removes unnecessary calls to `BKE_main_id_tag_all` where the
same job is done by `BKE_main_id_clear_newpoins` on the following line.
Reviewed By: campbellbarton, mont29
Ref D11379
|
|
|
|
We weren't clearing the recalc flags for that case.
|
|
Some persistent data code was disable due to a deeper design issue, which
meant some updates were not communicated to renderers.
Dependency graph updates work in two passes, once where Blender scene
animation updates are done, then app handler scripts can run to make further
scene modifications, and then the depsgraph is updated again to take those
into account.
Previously the viewport would update renderers twice when such app handler
scripts were present. Now both viewport and persistent data rendering update
the renderers only once, accumulating updates from both passes.
|
|
For Cycles, when enabling the Persistent Data option, the full render data
will be preserved from frame-to-frame in animation renders and between
re-renders of the scene. This means that any modifier evaluation, BVH
building, OpenGL vertex buffer uploads, etc, can be done only once for
unchanged objects. This comes at an increased memory cost.
Previously there option was named Persistent Images and had a more limited
impact on render time and memory.
When using multiple view layers, only data from a single view layer is
preserved to keep memory usage somewhat under control. However objects
shared between view layers are preserved, and so this can speedup such
renders as well, even single frame renders.
For Eevee and Workbench this option is not available, however these engines
will now always reuse the depsgraph for animation and multiple view layers.
This can significantly speed up rendering.
These engines do not support sharing the depsgraph between re-renders, due
to technical issues regarding OpenGL contexts. Support for this could be added
if those are solved, see the code comments for details.
|
|
'orient_type'
`orient_index` is a more comprehensive value as it reveals both the type and index.
Differential Revision: https://developer.blender.org/D9595
|
|
In the current implementation, cryptomatte passes are connected to the node
and elements are picked by using the eyedropper tool on a special pick channel.
This design has two disadvantages - both connecting all passes individually
and always having to switch to the picker channel are tedious.
With the new design, the user selects the RenderLayer or Image from which the
Cryptomatte layers are directly loaded (the type of pass is determined by an
enum). This allows the node to automatically detect all relevant passes.
Then, when using the eyedropper tool, the operator looks up the selected
coordinates from the picked Image, Node backdrop or Clip and reads the picked
object directly from the Renderlayer/Image, therefore allowing to pick in any
context (e.g. by clicking on the Combined pass in the Image Viewer). The
sampled color is looked up in the metadata and the actual name is stored
in the cryptomatte node. This also allows to remove a hash by just removing
the name from the matte id.
Technically there is some loss of flexibility because the Cryptomatte pass
inputs can no longer be connected to other nodes, but since any compositing
done on them is likely to break the Cryptomatte system anyways, this isn't
really a concern in practise.
In the future, this would also allow to automatically translate values to names
by looking up the value in the associated metadata of the input, or to get a
better visualization of overlapping areas in the Pick output since we could
blend colors now that the output doesn't have to contain the exact value.
Idea + Original patch: Lucas Stockner
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D3959
|
|
This concerns currently only collections (`master_collection` of scenes)
and root node trees. It removes the matching type-specific helpers
(`BKE_collection_master_scene_search` and `BKE_node_tree_find_owner_ID`).
No functional change expected here.
NOTE: Current implementation of `owner_get` is far from optimal, we
could probably do it better, see {T69169}.
NOTE: While it could also have it, shapekeys IDTypeInfo was left out of
this change for now. Mainly because it sould not be used currently, and
we ultimately want to demote shape keys from ID status anyway.
|
|
Following with the changes included to interpolate strokes of different number of points, a full review has been done in the interpolation tools.
* Interpolate now is a tool and not an operator. It was not logic to have this tool as a button.
* Interpolate tool parameters have been moved to topbar.
* Interpolate popover has been removed from topbar and interpolate `Sequence` operator has been moved to grease pencil menu.
* Interpolate Sequence now include a Redo panel.
* Interpolate tool now allows to select the strokes by pairs. This allows to interpolate any stroke with any stroke and not as before that it was only possible by drawing order. If no stroke is selected, the interpolation is done as before.
* Now is possible interpolate again if a previous keyframe exist. Before, it was impossible to interpolate two times in same frame and this made impossible to do the interpolation by groups of frames.
* New automatic option to `Flip strokes` if the stroke and end are not in the right position. Also the flip can be set manually for corner cases.
* Cleanup of menus related to interpolate.
* Fixed some bugs and removed parameters from scene because now all are tool or operator contained.
* Some code cleanup and function renames.
This commit also includes the some codebase to future implementation of the concept `Vertex Active` that now does not exist in grease pencil.
|
