Age | Commit message (Collapse) | Author |
|
While doxygen supports both, conform to our style guide.
Note that single back-tick's are already used in a majority of comments.
|
|
In this bug report it resulted in rendering animations stopping too early,
but this affected more areas.
After the previous cleanup commit, it becomes clear that frame and ctime
values were mixed up.
|
|
Confusingly, BKE_scene_frame_get did not match the frame number as expected by
BKE_scene_frame_set. Instead it return the value after time remapping, which
is commonly named "ctime".
* Rename BKE_scene_frame_get to BKE_scene_ctime_get
* Add a new BKE_scene_frame_get that matches BKE_scene_frame_set
* Use int/float depending if fractional frame is expected
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
Change snapping behavior to snap strip edges when they are close to snap point.
Default behavior is, that each transformed strip is snapped to any other strip.
Implement snapping controls in sequencer tool settings. These controls include:
- Snapping on/off
- Ability to snap to playhead and strip hold offset points
- Filter snap points by excluding sound or muted strips
- Control snapping distance
Snapping controls are placed in timeline header similar to 3D viewport
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11646
|
|
|
|
|
|
|
|
Use lookup string callback function for `sequences_all` RNA property
`rna_SequenceEditor_sequences_all_lookup_string` using a GHash for faster lookups.
When names are changed or strips are added/removed the lookup is tagged invalid.
The next time the lookup is used it will rebuild it.
Reviewed By: sergey, jbakker
Differential Revision: https://developer.blender.org/D11544
|
|
Note that these changes are limited simple cases as these kinds of
changes could allow for errors when refactoring code when the known
state is not so obvious.
|
|
It wasn't obvious this function cleared the tag as well.
|
|
This patch removes unnecessary calls to `BKE_main_id_tag_all` where the
same job is done by `BKE_main_id_clear_newpoins` on the following line.
Reviewed By: campbellbarton, mont29
Ref D11379
|
|
|
|
We weren't clearing the recalc flags for that case.
|
|
Some persistent data code was disable due to a deeper design issue, which
meant some updates were not communicated to renderers.
Dependency graph updates work in two passes, once where Blender scene
animation updates are done, then app handler scripts can run to make further
scene modifications, and then the depsgraph is updated again to take those
into account.
Previously the viewport would update renderers twice when such app handler
scripts were present. Now both viewport and persistent data rendering update
the renderers only once, accumulating updates from both passes.
|
|
For Cycles, when enabling the Persistent Data option, the full render data
will be preserved from frame-to-frame in animation renders and between
re-renders of the scene. This means that any modifier evaluation, BVH
building, OpenGL vertex buffer uploads, etc, can be done only once for
unchanged objects. This comes at an increased memory cost.
Previously there option was named Persistent Images and had a more limited
impact on render time and memory.
When using multiple view layers, only data from a single view layer is
preserved to keep memory usage somewhat under control. However objects
shared between view layers are preserved, and so this can speedup such
renders as well, even single frame renders.
For Eevee and Workbench this option is not available, however these engines
will now always reuse the depsgraph for animation and multiple view layers.
This can significantly speed up rendering.
These engines do not support sharing the depsgraph between re-renders, due
to technical issues regarding OpenGL contexts. Support for this could be added
if those are solved, see the code comments for details.
|
|
'orient_type'
`orient_index` is a more comprehensive value as it reveals both the type and index.
Differential Revision: https://developer.blender.org/D9595
|
|
In the current implementation, cryptomatte passes are connected to the node
and elements are picked by using the eyedropper tool on a special pick channel.
This design has two disadvantages - both connecting all passes individually
and always having to switch to the picker channel are tedious.
With the new design, the user selects the RenderLayer or Image from which the
Cryptomatte layers are directly loaded (the type of pass is determined by an
enum). This allows the node to automatically detect all relevant passes.
Then, when using the eyedropper tool, the operator looks up the selected
coordinates from the picked Image, Node backdrop or Clip and reads the picked
object directly from the Renderlayer/Image, therefore allowing to pick in any
context (e.g. by clicking on the Combined pass in the Image Viewer). The
sampled color is looked up in the metadata and the actual name is stored
in the cryptomatte node. This also allows to remove a hash by just removing
the name from the matte id.
Technically there is some loss of flexibility because the Cryptomatte pass
inputs can no longer be connected to other nodes, but since any compositing
done on them is likely to break the Cryptomatte system anyways, this isn't
really a concern in practise.
In the future, this would also allow to automatically translate values to names
by looking up the value in the associated metadata of the input, or to get a
better visualization of overlapping areas in the Pick output since we could
blend colors now that the output doesn't have to contain the exact value.
Idea + Original patch: Lucas Stockner
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D3959
|
|
This concerns currently only collections (`master_collection` of scenes)
and root node trees. It removes the matching type-specific helpers
(`BKE_collection_master_scene_search` and `BKE_node_tree_find_owner_ID`).
No functional change expected here.
NOTE: Current implementation of `owner_get` is far from optimal, we
could probably do it better, see {T69169}.
NOTE: While it could also have it, shapekeys IDTypeInfo was left out of
this change for now. Mainly because it sould not be used currently, and
we ultimately want to demote shape keys from ID status anyway.
|
|
Following with the changes included to interpolate strokes of different number of points, a full review has been done in the interpolation tools.
* Interpolate now is a tool and not an operator. It was not logic to have this tool as a button.
* Interpolate tool parameters have been moved to topbar.
* Interpolate popover has been removed from topbar and interpolate `Sequence` operator has been moved to grease pencil menu.
* Interpolate Sequence now include a Redo panel.
* Interpolate tool now allows to select the strokes by pairs. This allows to interpolate any stroke with any stroke and not as before that it was only possible by drawing order. If no stroke is selected, the interpolation is done as before.
* Now is possible interpolate again if a previous keyframe exist. Before, it was impossible to interpolate two times in same frame and this made impossible to do the interpolation by groups of frames.
* New automatic option to `Flip strokes` if the stroke and end are not in the right position. Also the flip can be set manually for corner cases.
* Cleanup of menus related to interpolate.
* Fixed some bugs and removed parameters from scene because now all are tool or operator contained.
* Some code cleanup and function renames.
This commit also includes the some codebase to future implementation of the concept `Vertex Active` that now does not exist in grease pencil.
|
|
|
|
Committing fix again, since it is somehow got lost when merging release
branch into master.
|
|
|
|
The value of the step was not initializated for new scenes.
|
|
Introduced in rB087777f2b9b8.
Fixes issues with scene from T82808.
|
|
|
|
Previously this relied on the dependency graph to detect changes in the screen
datablock, which would then notify the renderers. This was rather indirect an
not even really by design. Instead use notifiers to tag specific 3D viewports
to be updated.
Includes changes to BKE_scene_get_depsgraph to accept a const Scene pointer.
Testing if this works correctly requires adding back commits 81d444c and 088904d,
since those have been temporarily reverted.
Differential Revision: https://developer.blender.org/D10235
|
|
|
|
Currently this is needed to properly tag PointCache's for info update
(fixes an issue reported in T82503).
Suspect we may need this in more cases in the future though, RNA
assign/update processes are not always 100% enough to deal with
complicated corner cases.
|
|
Previously, it was only forbidden to delete the last scene. This can
lead to the situation where a .blend file only contains linked scenes.
This is problematic, because linked data might not always be available
or can be removed from a .blend file without having an additional check
for remaining scenes.
Now there always has to be at least one local scene.
Reviewers: mont29
Differential Revision: https://developer.blender.org/D10049
|
|
|
|
|
|
API functions get SEQ_ prefix.
Intern functions get seq_ prefix
Functions also have appropriate category included in name.
|
|
This commit resolves problem introduced in e1665c3d3190 - it was
difficult to import media at their original resolution.
This is done by using original resolution as reference for scale.
All crop and strip transform values and their animation is converted
form old files.
To make both workflows easy to use, sequencer tool settings have been
created with preset for preffered scaling method. This setting is in
sequencer timeline header and add image or movie strip operator
properties.
Two new operators have been added:
`sequencer.strip_transform_fit` operator with 3 options: Scale To Fit,
Scale to Fill and Stretch To Fill.
Operator can fail if strip image or video is not loaded currently, this
case should be either sanitized or data loaded on demand.
`sequencer.strip_transform_clear` operator with 4 options:
Clear position, scale, rotation and all (previous 3 options combined).
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D9582
|
|
Remove DNA headers, using forward declarations where possible.
Also removed duplicate header, header including it's self
and unnecessary inclusion of libc system headers from BKE header.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
a Stroke.
Add code preserving scene's toolsettings accross undo.
IDPointers are dealt with special care, we try to keep existing ones for
some (like brushes) when possible.
Note that this covers ToolSettings, Brushes and Palettes currently.
I'm not especially happy about how this new code mixes with existing
'foreach_id' one, in particular in scene. But cannot think of a better,
more generic way to do it currently.
Maniphest Tasks: T71759
Differential Revision: https://developer.blender.org/D9311
|
|
memfile undos
This is essentially adding that new callback, and using it only for already
existing Scene's 3DCursor.
Note that the place where this is called has been moved again, after all
have been lib-linked, such that those callbacks may also work on ID pointers.
Maniphest Tasks: T71759
Differential Revision: https://developer.blender.org/D9237
|
|
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9349
|
|
|
|
|
|
Corrects incorrect usages of the word 'loose' when 'lose' was required.
Differential Revision: https://developer.blender.org/D9243
Reviewed by Campbell Barton
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
Better use higher-level code from common ID management when possible.
Helps to de-duplicate logic, and reduces outside usages of more
'dangerous' functions.
Note that we could get rid of many of those `BKE_<id_type>_add`
functions now, but on the other hand several of those take extra
parameters and perform additional actions, so think we can keep them all
for now as 'non-standard ID specific creation functions'.
|
|
No reasons to keep the new ID pointer as parameter here.
Part of T71219.
|