| Age | Commit message (Collapse) | Author |
|---|
|
This makes changes to the opensubdiv module to support additional vertex data
besides the vertex position, that is smootly interpolated the same way. This is
different than varying data which is interpolated linearly.
Fixes T96596: wrong generated texture coordinates with GPU subdivision. In that
bug lazy subdivision would not interpolate orcos.
Later on, this implementation can also be used to remove the modifier stack
mechanism where modifiers are evaluated a second time for orcos, which is messy
and inefficient. But that's a more risky change, this is just the part to fix
the bug in 3.2.
Differential Revision: https://developer.blender.org/D14973
|
|
This is mostly a cleanup to avoid hardcoding the eager calculation of
normals it isn't necessary, by reducing calls to `BKE_mesh_calc_normals`
and by removing calls to `BKE_mesh_normals_tag_dirty` when the mesh
is newly created and already has dirty normals anyway. This reduces
boilerplate code and makes the "dirty by default" state more clear.
Any regressions from this commit should be easy to fix, though the
lazy calculation is solid enough that none are expected.
|
|
Continuing the refactors described in T93602, this commit moves
the face dot tag set by the subdivision surface modifier out of
`MVert` to `MeshRuntime`. This clarifies its status as runtime data
and allows further refactoring of mesh positions in the future.
Before, `BKE_modifiers_uses_subsurf_facedots` was used to check
whether subsurf face dots should be drawn, but now we can just check
if the tags exist on the mesh. Modifiers that create new new geometry
or modify topology will already remove the array by clearing mesh
runtime data.
Differential Revision: https://developer.blender.org/D14680
|
|
|
|
|
|
There are two issues revealed in the bug report:
- the GPU subdivision does not support meshes with only loose geometry
- the loose geometry is not subdivided
For the first case, checks are added to ensure we still fill the
buffers with loose geometry even if no polygons are present.
For the second case, this adds
`BKE_subdiv_mesh_interpolate_position_on_edge` which encapsulates the
loose vertex interpolation mechanism previously found in
`subdiv_mesh_vertex_of_loose_edge`.
The subdivided loose geometry is stored in a new specific data structure
`DRWSubdivLooseGeom` so as to not pollute `MeshExtractLooseGeom`. These
structures store the corresponding coarse element data, which will be
used for filling GPU buffers appropriately.
Differential Revision: https://developer.blender.org/D14171
|
|
|
|
There was accidentally some displacement related code running even when not
using displacement.
Differential Revision: https://developer.blender.org/D14169
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
The crash was happening when the mesh had loose edges.
Loose edges are not part of OpenSubdiv topology and hence should not be
communicated to the refiner. Pass ta boolean flag indicating whether an
edge is loose or not in the mesh foreach routines, which seems to be
the easiest way.
|
|
As described in T91186, this commit moves mesh vertex normals into a
contiguous array of float vectors in a custom data layer, how face
normals are currently stored.
The main interface is documented in `BKE_mesh.h`. Vertex and face
normals are now calculated on-demand and cached, retrieved with an
"ensure" function. Since the logical state of a mesh is now "has
normals when necessary", they can be retrieved from a `const` mesh.
The goal is to use on-demand calculation for all derived data, but
leave room for eager calculation for performance purposes (modifier
evaluation is threaded, but viewport data generation is not).
**Benefits**
This moves us closer to a SoA approach rather than the current AoS
paradigm. Accessing a contiguous `float3` is much more efficient than
retrieving data from a larger struct. The memory requirements for
accessing only normals or vertex locations are smaller, and at the
cost of more memory usage for just normals, they now don't have to
be converted between float and short, which also simplifies code
In the future, the remaining items can be removed from `MVert`,
leaving only `float3`, which has similar benefits (see T93602).
Removing the combination of derived and original data makes it
conceptually simpler to only calculate normals when necessary.
This is especially important now that we have more opportunities
for temporary meshes in geometry nodes.
**Performance**
In addition to the theoretical future performance improvements by
making `MVert == float3`, I've done some basic performance testing
on this patch directly. The data is fairly rough, but it gives an idea
about where things stand generally.
- Mesh line primitive 4m Verts: 1.16x faster (36 -> 31 ms),
showing that accessing just `MVert` is now more efficient.
- Spring Splash Screen: 1.03-1.06 -> 1.06-1.11 FPS, a very slight
change that at least shows there is no regression.
- Sprite Fright Snail Smoosh: 3.30-3.40 -> 3.42-3.50 FPS, a small
but observable speedup.
- Set Position Node with Scaled Normal: 1.36x faster (53 -> 39 ms),
shows that using normals in geometry nodes is faster.
- Normal Calculation 1.6m Vert Cube: 1.19x faster (25 -> 21 ms),
shows that calculating normals is slightly faster now.
- File Size of 1.6m Vert Cube: 1.03x smaller (214.7 -> 208.4 MB),
Normals are not saved in files, which can help with large meshes.
As for memory usage, it may be slightly more in some cases, but
I didn't observe any difference in the production files I tested.
**Tests**
Some modifiers and cycles test results need to be updated with this
commit, for two reasons:
- The subdivision surface modifier is not responsible for calculating
normals anymore. In master, the modifier creates different normals
than the result of the `Mesh` normal calculation, so this is a bug
fix.
- There are small differences in the results of some modifiers that
use normals because they are not converted to and from `short`
anymore.
**Future improvements**
- Remove `ModifierTypeInfo::dependsOnNormals`. Code in each modifier
already retrieves normals if they are needed anyway.
- Copy normals as part of a better CoW system for attributes.
- Make more areas use lazy instead of eager normal calculation.
- Remove `BKE_mesh_normals_tag_dirty` in more places since that is
now the default state of a new mesh.
- Possibly apply a similar change to derived face corner normals.
Differential Revision: https://developer.blender.org/D12770
|
|
|
|
|
|
This evaluator is used in order to evaluate subdivision at render time, allowing for
faster renders of meshes with a subdivision surface modifier placed at the last
position in the modifier list.
When evaluating the subsurf modifier, we detect whether we can delegate evaluation
to the draw code. If so, the subdivision is first evaluated on the GPU using our own
custom evaluator (only the coarse data needs to be initially sent to the GPU), then,
buffers for the final `MeshBufferCache` are filled on the GPU using a set of
compute shaders. However, some buffers are still filled on the CPU side, if doing so
on the GPU is impractical (e.g. the line adjacency buffer used for x-ray, whose
logic is hardly GPU compatible).
This is done at the mesh buffer extraction level so that the result can be readily used
in the various OpenGL engines, without having to write custom geometry or tesselation
shaders.
We use our own subdivision evaluation shaders, instead of OpenSubDiv's vanilla one, in
order to control the data layout, and interpolation. For example, we store vertex colors
as compressed 16-bit integers, while OpenSubDiv's default evaluator only work for float
types.
In order to still access the modified geometry on the CPU side, for use in modifiers
or transform operators, a dedicated wrapper type is added `MESH_WRAPPER_TYPE_SUBD`.
Subdivision will be lazily evaluated via `BKE_object_get_evaluated_mesh` which will
create such a wrapper if possible. If the final subdivision surface is not needed on
the CPU side, `BKE_object_get_evaluated_mesh_no_subsurf` should be used.
Enabling or disabling GPU subdivision can be done through the user preferences (under
Viewport -> Subdivision).
See patch description for benchmarks.
Reviewed By: campbellbarton, jbakker, fclem, brecht, #eevee_viewport
Differential Revision: https://developer.blender.org/D12406
|
|
Interpolation vertex data on loose edges was writing into already
allocated data.
Resolve this by skipping vertex end-points for custom-data interpolation
which has already been copied from the source mesh.
Reviewed By: sergey
Ref D13082
|
|
By argument naming and convention this is the intended argument order.
|
|
No functional changes.
|
|
|
|
|
|
When the limit surface is disabled OpenSubdiv generates a set of linear
patches which are only C0 continuous, not C1. This makes it impossible to
evaluate derivatives at vertices which, in this mode, are by definition put
at boundaries of patches. Normals are calculated from those derivatives.
Solution is to disable normal calculation and let it be done downstream, as
for other modifiers. This limitation is also the reason that non feature
adaptive subdivision is badly suited for GPU evaluation.
Differential Revision: https://developer.blender.org/D9103
|
|
In the Multires panel, use singular Subdivision instead of Subdivisions.
|
|
|
|
Actually, begin will do the entire initialization.
Refine will only refine if there is a topology refiner associated
with the Subdiv descriptor.
Allows to refine Subdiv to new coarse positions without touching
displacement evaluation. Will be needed to update SubdivCCG during
sculpt undo.
|
|
The normals of loose edges can be non uniform as they aren't normalized.
Checked with what happens with edit loose edges and synchronized the
implementation.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D7127
|
|
|
|
|
|
Deformation of subdivision surface modifier was using wrong coordinates
for the coarse mesh: as the modifier flow goes the coordinates are to be
taken from the input array of coordinates.
|
|
|
|
When the result isn't used, prefer post increment/decrement
(already used nearly everywhere in Blender).
|
|
This reduce memory usage by about 25% in object mode for multires meshes.
|
|
Stupid typo in an original fix, need to operate in 3D, not in 2D.
|
|
They were always acting as a B-Spline subdivision.
|
|
Previously in 2.79 we were using a specialized drawing using derivedMesh.
Now the subsurf modifier tag each center vertex as facedot and let the
DRWManager pick it up.
Some modifiers (deforming ones) do not clear the tag so we can use this
technique even if there is deforming modifiers after subsurf modifiers.
|
|
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
We already have different storages for cddata of verts, edges etc.,
'simply' do the same for the mask flags we use all around Blender code
to request some data, or limit some operation to some layers, etc.
Reason we need this is that some cddata types (like Normals) are
actually shared between verts/polys/loops, and we don’t want to generate
clnors everytime we request vnors!
As a side note, this also does final fix to T59338, which was the
trigger for this patch (need to request computed loop normals for
another mesh than evaluated one).
Reviewers: brecht, campbellbarton, sergey
Differential Revision: https://developer.blender.org/D4407
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
|
|
|
|
Treat those vertices as infinitely sharp. This matches the way
how OpenSubdiv's topology is being created.
|
|
The issue was caused by the lack of averaging of normals for
vertices which are on the ptex face boundaries.
|
|
|
|
|
|
This is a part of T58609, but work is still needed to properly
support this flag in the draw manager.
|
|
|
|
Differential Revision: https://developer.blender.org/D3719
|
