| Age | Commit message (Collapse) | Author |
|---|
|
- move: material.add_texture(tex, coords, mapto) --> material.texture_slots.add()
- added material.texture_slots.create(index), material.texture_slots.clear(index)
- texture slot functions also work for lamp and world now.
Other minor changes
- allow rna functions to set FUNC_NO_SELF and FUNC_USE_SELF_ID at once.
- [#23317] Changed some operators' RNA to accept lengths, a modification I made to this patch made it not work as intended, removed this edit so unit buttons appier in the UI for certain operators.
- Sphinx doc gen, 2 columns rather then 3, didnt quite fit in some cases.
|
|
|
|
- remove scons option WITH_BF_FHS, its not needed anymore.
- comment WITH_BF_DOCS, was using epydocs which we dont use now.
- blenderlite target was broken, always using openmp.
- building without python wasnt working.
- fixed some warnings.
|
|
from Dan Eicher (dna)
elem = color_ramp.elements.new(position=0.3)
color_ramp.elements.remove(elem)
- Modified the patch to make generic functions for adding and removing (inline code was in 3 different places)
|
|
we'll need a do-version bump soon or this will convert 0.0 saturation to 1.0 on load.
|
|
|
|
on other stuff today
|
|
Voxel Data texture of type Image sequence
Cleaned up the code here, made it more efficient and more reliable with threaded render.
|
|
RGBA 0000 - RGBA 1111 (no more cyan)
|
|
Made texture/texture slot context a bit less flaky when dealing with active material and
texture nodes inside a node material in the node editor. Now if the active material has
nodes enabled, and there are no active material/texture nodes inside it, nothing will be
shown in the texture properties (similar to 2.49).
|
|
|
|
|
|
|
|
* Fixed up RNA and UI
* Brought back 'Save' and 'Clear' operators (in the little triangle menu in
environment map properties)
* While I was at it, noticed that environment maps were only using 8bit
colour, changed it to use full 32bit float instead for proper HDR colour etc,
so environment map reflections have the correct colour range
--> http://mke3.net/blender/devel/2.5/env_hdr.jpg
This fixes [#20904] Environment Map does not render; also missing panel
|
|
Texture animation is now shown in the animation editors. Texture stacks are shown for each Material/Lamp/World block that uses them.
There is currently still a bit of a bug with this which means that unless the owner of the texture stack is animated too, the animation data for the textures won't show up. This will get rectified soon though.
|
|
|
|
|
|
changed some malloc to MEM_mallocN while trying to track down a memory leak.
|
|
keep that texture locked as the current visible texture in the
texture buttons.
|
|
This changes how textures are accessed from Brushes, with the intention of simplifying
the workflow, and reducing the amount of clicking. Rather than the previous texture slots
(which didn't work as a stack anyway), brushes now have a single texture linked. Rather
than taking time having to set up your slots in advance, you can now select and change
textures directly as you sculpt/paint on the fly. For complex brushes, node textures can
be used, or for fast access, it's easy to make a duplicate of your brush with the texture
you like and assign a hotkey.
Brush textures can now be chosen from a new Textures panel in the brush tool
properties - click on the thumbnail to open a texture selector. This is done using a new
variation on the ID template - the number of rows and columns to display in the popup
can be customised in the UI scripts.
|
|
OpenCollada @ 675, Linux) and 25001 (bone animation import). See corresponding log entries for more detail.
|
|
* Convert all code to use new functions.
* Branch maintainers may want to skip this commit, and run this
conversion script instead, if they use a lot of math functions
in new code:
http://www.pasteall.org/9052/python
|
|
Non-ID pointers in DNA can only point to data from own ID block, so
now instead it uses an index into the particle system list, but still
exposed as a pointer through RNA.
|
|
|
|
when using node materials.
|
|
material nodes and texture nodes. Made it all use the same
give_current_*_texture functions now.
|
|
mapped values now have their influence negated instead. Also a few
RNA changes for TextureSlot.
Bumped subversion for the version patch.
|
|
After code review and experimentation, this commit makes some changes to the way that volumes are shaded. Previously, there were problems with the 'scattering' component, in that it wasn't physically correct - it didn't conserve energy and was just acting as a brightness multiplier. This has been changed to be more correct, so that as the light is scattered out of the volume, there is less remaining to penetrate through.
Since this behaviour is very similar to absorption but more useful, absorption has been removed and has been replaced by a 'transmission colour' - controlling the colour of light penetrating through the volume after it has been scattered/absorbed. As well as this, there's now 'reflection', a non-physically correct RGB multiplier for out-scattered light. This is handy for tweaking the overall colour of the volume, without having to worry about wavelength dependent absorption, and its effects on transmitted light. Now at least, even though there is the ability to tweak things non-physically, volume shading is physically based by default, and has a better combination of correctness and ease of use.
There's more detailed information and example images here:
http://wiki.blender.org/index.php/User:Broken/VolumeRendering
Also did some tweaks/optimisation:
* Removed shading step size (was a bit annoying, if it comes back, it will be in a different form)
* Removed phase function options, now just one asymmetry slider controls the range between back-scattering, isotropic scattering, and forward scattering. (note, more extreme values gives artifacts with light cache, will fix...)
* Disabled the extra 'bounce lights' from the preview render for volumes, speeds updates significantly
* Enabled voxeldata texture in preview render
* Fixed volume shadows (they were too dark, fixed by avoiding using the shadfac/AddAlphaLight stuff)
More revisions to come later...
|
|
|
|
renamed set_four_ipo -> key_curve_position_weights
renamed set_afgeleide_four_ipo -> key_curve_tangent_weights
added key_curve_normal_weights
|
|
replacements...
MTC_cross3Float -> Crossf
MTC_diff3Float -> VecSubf
MTC_dot3Float -> Inpf
MTC_Mat3CpyMat4 -> Mat3CpyMat4
MTC_Mat3MulVecd -> Mat3MulVecd
MTC_Mat3MulVecfl -> Mat3MulVecfl
MTC_Mat4CpyMat4 -> Mat4CpyMat4
MTC_Mat4Invert -> Mat4Invert
MTC_Mat4Mul3Vecfl -> Mat4Mul3Vecfl
MTC_Mat4MulMat4 -> Mat4MulMat4
MTC_Mat4MulSerie -> Mat4MulSerie
MTC_Mat4MulVec4fl -> Mat4MulVec4fl
MTC_Mat4MulVecfl -> Mat4MulVecfl
MTC_Mat4One -> Mat4One
MTC_Mat4Ortho -> Mat4Ortho
MTC_Mat4SwapMat4 -> Mat4SwapMat4
|
|
replacements...
MTC_cross3Float -> Crossf
MTC_diff3Float -> VecSubf
MTC_dot3Float -> Inpf
MTC_Mat3CpyMat4 -> Mat3CpyMat4
MTC_Mat3MulVecd -> Mat3MulVecd
MTC_Mat3MulVecfl -> Mat3MulVecfl
MTC_Mat4CpyMat4 -> Mat4CpyMat4
MTC_Mat4Invert -> Mat4Invert
MTC_Mat4Mul3Vecfl -> Mat4Mul3Vecfl
MTC_Mat4MulMat4 -> Mat4MulMat4
MTC_Mat4MulSerie -> Mat4MulSerie
MTC_Mat4MulVec4fl -> Mat4MulVec4fl
MTC_Mat4MulVecfl -> Mat4MulVecfl
MTC_Mat4One -> Mat4One
MTC_Mat4Ortho -> Mat4Ortho
MTC_Mat4SwapMat4 -> Mat4SwapMat4
|
|
Also, made the Outliner's horizontal scrollbar work better for keymaps view. It's still using an approximation of the width, but at least you can scroll now.
|
|
|
|
* data reorganisation - uses own values now instead of reusing surface material properties (i.e. an individual density value, rather than reusing alpha) Files saved with the old system won't load up the same after this.
* improved defaults and ui
|
|
Integration is still very rough around the edges and WIP, but it works, and can render smoke (using new Smoke format in Voxel Data texture) --> http://vimeo.com/6030983
More to come, but this makes things much easier to work on for me :)
|
|
* Make EWA new default, rename Default to Box.
* Fix windows compile issue in texture filter code.
|
|
Patch by Alfredo de Greef. Considerably improves the quality of bump
mapping, and texture filtering for displacement and warp too. Mainly
this is achieved by getting the texture derivatives just right in
various cases, many thanks to Alfredo for figuring this one out, works
great.
This is enabled by default now, but disabled still for existing
textures to preserve backwards compatibility. Can be enabled with
the "New Bump" option in the material texture slot in the outliner.
Also, I made the range for the normal factor a bit smaller since this
gives stronger effects, but note that you can still type in larger
values than the slider allows.
|
|
Patch by Alfredo de Greef with high quality image texture filters.
This adds 3 new filters:
* SAT: Summed Area Tables. This is like mipmaps, but using somewhat
more memory avoids some artifacts.
* EWA: Ellipitical Weighted Average, anisotropic filter.
* FELINE: Fast elliptical lines for anisotropic texture mapping.
The one change I made to this was to try to fix an alpha/premul
problem, hopefully I didn't break anything, it looks compatible
with the existing filter now for me.
|
|
* Objects now support up to 32767 material slots. It's easy to
increase this further, but I prefer not to increase the memory
usage of mesh faces, it seems unlikely that someone would
create 32767 distinct materials?
* Forward compatibility: the only thing you can potentially lose
reading a 2.5 file in 2.4 is object linking (instead of default
data), though usually that will go fine too. Reading files with
> 32 material slots in 2.4 can start giving issues.
* The ob->colbits variable is deprecated by the array ob->matbits
but I didn't remove the ob->colbits updates in very few places
it is set.
* I hope I changed all the relevant things, various places just
hardcoded the number 16 instead of using the MAXMAT define.
* Join Objects operator back. This is using the version from the
animsys2 branch coded by Joshua, which means it now supports
joining of shape keys.
* Fix for crash reading file saved during render.
|
|
* Removed nAction struct. We'll be using good ol' bAction structs again, but putting new data in a different list. Apart from that, the data is similar enough to do so.
* Rearranged code in DNA_action_types.h while renaming the structs to avoid confusion over what is currently in use...
* Added freeing and AnimData execution loops for many other ID-types too. (NOTE: I've added AnimData in NodeTree struct too, but it's not clear to me where the relevant data-management calls should go in Nodes code).
* File writing code should now only write the new data to files
|
|
Finally, here is the basic (functional) prototype of the new animation system which will allow for the infamous "everything is animatable", and which also addresses several of the more serious shortcomings of the old system. Unfortunately, this will break old animation files (especially right now, as I haven't written the version patching code yet), however, this is for the future.
Highlights of the new system:
* Scrapped IPO-Curves/IPO/(Action+Constraint-Channels)/Action system, and replaced it with F-Curve/Action.
- F-Curves (animators from other packages will feel at home with this name) replace IPO-Curves.
- The 'new' Actions, act as the containers for F-Curves, so that they can be reused. They are therefore more akin to the old 'IPO' blocks, except they do not have the blocktype restriction, so you can store materials/texture/geometry F-Curves in the same Action as Object transforms, etc.
* F-Curves use RNA-paths for Data Access, hence allowing "every" (where sensible/editable that is) user-accessible setting from RNA to be animated.
* Drivers are no longer mixed with Animation Data, so rigs will not be that easily broken and several dependency problems can be eliminated. (NOTE: drivers haven't been hooked up yet, but the code is in place)
* F-Curve modifier system allows useful 'large-scale' manipulation of F-Curve values, including (I've only included implemented ones here): envelope deform (similar to lattices to allow broad-scale reshaping of curves), curve generator (polynomial or py-expression), cycles (replacing the old cyclic extrapolation modes, giving more control over this). (NOTE: currently this cannot be tested, as there's not access to them, but the code is all in place)
* NLA system with 'tracks' (i.e. layers), and multiple strips per track. (NOTE: NLA system is not yet functional, as it's only partially coded still)
There are more nice things that I will be preparing some nice docs for soon, but for now, check for more details:
http://lists.blender.org/pipermail/bf-taskforce25/2009-January/000260.html
So, what currently works:
* I've implemented two basic operators for the 3D-view only to Insert and Delete Keyframes. These are tempolary ones only that will be replaced in due course with 'proper' code.
* Object Loc/Rot/Scale can be keyframed. Also, the colour of the 'active' material (Note: this should really be for nth material instead, but that doesn't work yet in RNA) can also be keyframed into the same datablock.
* Standard animation refresh (i.e. animation resulting from NLA and Action evaluation) is now done completely separate from drivers before anything else is done after a frame change. Drivers are handled after this in a separate pass, as dictated by depsgraph flags, etc.
Notes:
* Drivers haven't been hooked up yet
* Only objects and data directly linked to objects can be animated.
* Depsgraph will need further tweaks. Currently, I've only made sure that it will update some things in the most basic cases (i.e. frame change).
* Animation Editors are currently broken (in terms of editing stuff). This will be my next target (priority to get Dopesheet working first, then F-Curve editor - i.e. old IPO Editor)
* I've had to put in large chunks of XXX sandboxing for old animation system code all around the place. This will be cleaned up in due course, as some places need special review.
In particular, the particles and sequencer code have far too many manual calls to calculate + flush animation info, which is really bad (this is a 'please explain yourselves' call to Physics coders!).
|
|
Cleanup:
- Makefile was using confused link order, now all intern and
and extern libs are put after blender and editor libs
- Old stubs.c in editors/screen removed. The leftover python
stubs calls were moved to python module.
|
|
Think global, act local!
The old favorite G.scene gone! Man... that took almost 2 days.
Also removed G.curscreen and G.edbo.
Not everything could get solved; here's some notes.
- modifiers now store current scene in ModifierData. This is not
meant for permanent, but it can probably stick there until we
cleaned the anim system and depsgraph to cope better with
timing issues.
- Game engine G.scene should become an argument for staring it.
Didn't solve this yet.
- Texture nodes should get scene cfra, but the current implementation
is too tightly wrapped to do it easily.
|
|
This commit introduces a new texture ('Voxel Data'), used to load up saved voxel
data sets for rendering, contributed by Raúl 'farsthary' Fernández Hernández
with some additional tweaks. Thanks, Raúl!
The texture works similar to the existing point density texture, currently it
only provides intensity information, which can then be mapped (for example) to
density in a volume material. This is an early version, intended to read the
voxel format saved by Raúl's command line simulators, in future revisions
there's potential for making a more full-featured 'Blender voxel file format',
and also for supporting other formats too.
Note: Due to some subtleties in Raúl's existing released simulators, in order
to load them correctly the voxel data texture, you'll need to raise the
'resolution' value by 2. So if you baked out the simulation at resolution 50,
enter 52 for the resolution in the texture panel. This can possibly be fixed in
the simulator later on.
Right now, the way the texture is mapped is just in the space 0,0,0 <-> 1,1,1
and it can appear rotated 90 degrees incorrectly. This will be tackled, for now,
probably the easiest way to map it is with and empty, using Map Input -> Object.
Smoke test: http://www.vimeo.com/2449270
One more note, trilinear interpolation seems a bit slow at the moment, we'll
look into this.
For curiosity, while testing/debugging this, I made a script that exports a mesh
to voxel data. Here's a test of grogan (www.kajimba.com) converted to voxels,
rendered as a volume: http://www.vimeo.com/2512028
The script is available here: http://mke3.net/projects/bpython/export_object_voxeldata.py
* Another smaller thing, brought back early ray termination (was disabled
previously for debugging) and made it user configurable. It now appears as a new
value in the volume material: 'Depth Cutoff'. For some background info on what
this does, check:
http://farsthary.wordpress.com/2008/12/11/cutting-down-render-times/
* Also some disabled work-in-progess code for light cache
|
|
https://svn.blender.org/svnroot/bf-blender/trunk/blender
|
|
svn merge https://svn.blender.org/svnroot/bf-blender/trunk/blender -r17416:HEAD
|
|
svn merge https://svn.blender.org/svnroot/bf-blender/trunk/blender -r12987:17416
Issues:
* GHOST/X11 had conflicting changes. Some code was added in 2.5, which was
later added in trunk also, but reverted partially, specifically revision
16683. I have left out this reversion in the 2.5 branch since I think it is
needed there.
http://projects.blender.org/plugins/scmsvn/viewcvs.php?view=rev&root=bf-blender&revision=16683
* Scons had various conflicting changes, I decided to go with trunk version
for everything except priorities and some library renaming.
* In creator.c, there were various fixes and fixes for fixes related to the -w
-W and -p options. In 2.5 -w and -W is not coded yet, and -p is done
differently. Since this is changed so much, and I don't think those fixes
would be needed in 2.5, I've left them out.
* Also in creator.c: there was code for a python bugfix where the screen was not
initialized when running with -P. The code that initializes the screen there
I had to disable, that can't work in 2.5 anymore but left it commented as a
reminder.
Further I had to disable some new function calls. using src/ and python/, as
was done already in this branch, disabled function calls:
* bpath.c: error reporting
* BME_conversions.c: editmesh conversion functions.
* SHD_dynamic: disabled almost completely, there is no python/.
* KX_PythonInit.cpp and Ketsji/ build files: Mathutils is not there, disabled.
* text.c: clipboard copy call.
* object.c: OB_SUPPORT_MATERIAL.
* DerivedMesh.c and subsurf_ccg, stipple_quarttone.
Still to be done:
* Go over files and functions that were moved to a different location but could
still use changes that were done in trunk.
|
|
Robin (Frrr) Allen did a decent job on this, so we can also welcome him
as a member in the svn committers team to maintain it!
I do the first commit with some minor fixes:
- get Makefiles work
- fix rounding issue with tiles on unit faces
- removed UI includes from tex node
A nice doc in wiki is here:
http://wiki.blender.org/index.php/User:Frr/TexnodeManual
On the todo for Robin is:
- When using one or more Texture-input nodes, you cannot edit them by activating
(as works now for Material nodes).
- The new "output node" option fails on the default case, when only one
output node is active. It then shows often a blank menu. Will get fixed asap.
- When using a NodeTree-Texture as input node, the menu for 'active output'
should not show. NodeTree should ignore other nodetrees to keep things sane
for now.
- On a future todo is proper usage of "Dxt" and "Dyt" texture vectors for
superior antialising of checkers/bricks.
General note; I know people are dying to get a full integrated shader system
with nodes. In theory we could merge this with Material Nodetrees... but I
rather wait for a solid and very well thought out design proposal for this,
also including design ideas for unifying with a shader language (GPU, CPU).
For the time being this is a nice extension of current textures. :)
|
|
* Fixed a stupid crash caused by last commit that worked fine on the mac
(but never should have...)
* Fix for using child particles with the new particle age color options
|
