| Age | Commit message (Collapse) | Author |
|---|
|
Add include & initialize variable.
|
|
Merge into BKE_blendfile_userdef_from_defaults
|
|
Simplify preferences by removing the ability to load them from
either the startup.blend or userpref.blend.
Also simplifies updating default preferences by moving
them to a struct definition.
|
|
This patch introduces the same presets that are used for proportional editing in the brush falloff menu. The user can select any of these presets or use the regular custom falloff curve. The presets are hardcoded formulas, so the falloff curve is not used when they are active.
This change improves the general feeling of the brushes and it is more convenient and simpler to use. The CUSTOM curve option should now be used in the case that an unusual deformation is needed, in other cases, the hardcoded curve presets should be the default.
The smooth curve presets is a must in the grab brush, as it fixes the deformation issue with the current custom curve setting. The user may try to adjust the deformation by tweaking the curve, but it is nearly impossible to replicate this desired behavior.
{F7636217}
Other brushes that are included in the sculpt branch also rely on this as they need specific hardcoded falloffs to produce the desired effect.
Reviewers: brecht, billreynish
Reviewed By: brecht
Subscribers: JulienKaspar
Differential Revision: https://developer.blender.org/D5367
|
|
This function makes it possible to clear/remove/nuke all the geometry in
a mesh, allowing functions like `Mesh.from_python()` to construct a new
mesh in its place. Without this function, code like in T67627 have to
allocate a new Mesh datablock, fill that, and swap out the old Mesh for
the new one. This introduces issues when exporting, as the new mesh
could be seen by an exporter as unrelated to the old one.
Shape keys are not freed by this function. Freeing those would require
tagging the depsgraph for relations update, which is an expensive
operation. They should be removed explicitly if necessary.
Material slots are also not cleared by this function, in the same way
that they are not cleared when manually removing all geometry from a
mesh.
The `BKE_mesh_clear_geometry()` function is available in Python as
`mesh.clear_geometry()`.
Reviewed by: mont29, brecht
Differential Revision: https://developer.blender.org/D5373
|
|
This commit adds support for the WebM container. Previously we only
supported the WebM/VP9 video codec, but still required that it was
stored in a Matroska, MP4, or other compatible container format.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5156
|
|
The VP9 video codec supports writing alpha values; now this is available
in Blender too.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5156
|
|
Simplified `BKE_ffmpeg_alpha_channel_is_supported()` to use `ELEM()`
instead of a row consecutive `if`-statements.
No functional changes.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5156
|
|
TLS and Settings can be used by other types of parallel 'for loops', so
removing 'Range' from their names.
No functional changes expected here.
|
|
collections.
Some ugly very low-level collection code was using the generic
LIB_TAG_DOIT tag... should never happen, that one is for rather
high-level code to use, core process shall use own tags.
|
|
|
|
|
|
This was caused by 2D stabilization trying to be smart and lower weight
of tracks which are too close to the rotation center. This was causing
algorithm to ignore a single track which was set to constant 1 weight and
used for rotation compensation.
It is quite tricky to quantify this change without having comprehensive
regression suit, so can only hope that initial intention is still working
as expected.
|
|
Stupid typo in an original fix, need to operate in 3D, not in 2D.
|
|
Sync back between proxy armature pose and linked one was not properly
clearing the posebone runtime data, ending up with shared memory between
both (direct cause of reported crash), and probably some other nasty
issues.
While this crash is not critical in itself, I would suggest to add this
fix to 2.80 branch, as it is super-safe and simple, and is probably
fixing some other un-reported issues?
|
|
Mode crashes Blender.
Main issue in that report was that meshes generated from
`mesh_create_eval_final_view()` and the like need some
special freeing handling (as, among other things, they borrow and do not
own their potential editmesh data...).
Factorized that into a helper func also used by
`BKE_object_free_derived_caches()`.
|
|
|
|
Such reload can no longer happen directly and is to be done via dependency
graph.
Eventually, the movie cache will become shared across all copies of the
clip, but even then we still need to have dependency graph mechanism because
we need to update FFmpeg animation handle (which can not be shared across
the copies).
|
|
Removing this since it was added for TexFace support
which has since been removed.
|
|
Need to copy changes from original armature to evaluated one prior to
BKE_pose_where_is(), otherwise the pose matrix in pose channels will
not be correct.
Can not use dependency graph update here, since we must not re-evaluate
possible dependencies of the changed armature.
Reviewers: brecht
Reviewed By: brecht
Maniphest Tasks: T67507
Differential Revision: https://developer.blender.org/D5331
|
|
|
|
They were always acting as a B-Spline subdivision.
|
|
|
|
Add check for negative loop-start,
fixes crash validating test file from T67605.
|
|
Before this the message could be too generic which was simply saying
that console is to be checked. This isn't very useful in cases when
we know that reconstruction is failed because of lack of good keyframes
or failure of initial reconstruction if there is no enough parallax
on the selected keyframes.
|
|
Correct fix that doesn't cause T67217.
Temporarily removing the excluded undo step broke memfile-undo
since freeing the undo steps needs to access other steps in
the list to merge shared chunks, see: memfile_undosys_step_free.
Pass the exclude step as an argument instead.
|
|
This reverts commit c635663e4a8169f68010b9234fa60f17ad03d7cb. This is causing
crashes with sculpt mode and object mode switching.
Fixes T67217.
|
|
Reported by @sybren on IRC, thanks.
Should be safe for 2.80.
|
|
Text datablocks should always have a 'single user' flag set, and they
usually do not have any user (since neither text editor itself, nor
Freestyle usage are text users - the second is odd btw...), the only one
am aware of is the script node (e.g. for OSL).
Add text case was simply not doing anything, so added.
Load text case was doing things in inversed logic (setting user count to
zero in BKE, then setting 'real user' flag in ED code). Made it the
other way around (BKE ID creation code should not care about usercount
usually, this is up to higher-level code to decide what to do
(operators, RNA...).
Note: tried to check all cases, but there might very well be some more
hidden bugs here...
|
|
This reverts commit b0b2546d4a3a308da19d218d919915aac4834e59.
Please do not sweept the dirt under the carpet like that! If there is a
bug, either report it or fix it, but do not silence it!
|
|
|
|
|
|
This reverts commit 9e9fbb39d7f9e0a63c71fbc96237ace62fae0db6.
Adding back object+pose bone selection support removes the need for this fix.
|
|
Basically layer_collection_sync was calling BKE_base_eval_flags right away while
iterating over the bases.
However when a parent/sibling collection is to influence the collection flag of
an object that exists in more than one collection, it is too late since we
deselect the object in BKE_base_eval_flags right away.
Related to T64312.
Reviewers: sergey, brecht
Differential Revision: https://developer.blender.org/D5243
|
|
`layer_used` runtime data, which controls the drawing of dots in the UI was not getting refreshed properly.
This used to happen in the drawing code, but was no longer working for reasons explained in:
{rB2b09062defa093a243b5fe64b099accb07b440a3}
The solution was to update each layer manually in the operators:
* ARMATURE_OT_bone_primitive_add
* ARMATURE_OT_delete
* ARMATURE_OT_dissolve
* ARMATURE_OT_fill
* ARMATURE_OT_merge
* ARMATURE_OT_separate
* ARMATURE_OT_bone_layers
* POSE_OT_bone_layers
Differential Revision: https://developer.blender.org/D5281
|
|
Applying/undoing incremental changes didn't fit well when
mixed with periodic snapshots from mem-file undo.
This moves to a much simpler undo system.
- Uses array storage with de-duplication from `BLI_array_store`.
- Loads the buffer into existing text data,
for better performance on large files.
- Has the advantage that Python operators can be supported
since we don't depend on hard coded undo operations.
Solves T67045, T66695, T65909.
|
|
|
|
Don't try to use old screens as workspaces, just leave them out of the menu.
Differential Revision: https://developer.blender.org/D5270
|
|
Update the default init step values to be the same for all caches.
This is actually a small hack as these values are not used on the
creation of the first cache. But the default init value is 1, so this
will not be noticeable anymore.
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D5271
|
|
RigidBodyConstraints collection.
We only had a very limited, specific handling of that in collection
duplication code, but this has to be handled at a much more general
level in Object copy code itself, since it makes no sense to duplicate
rigidbody object data without adding new copy to relevant rigidbody
collections...
WARNING: This is a fairly risky rework of rigidbody handling logic
when copying an Object data-block. It is *NOT* considered safe enough
for 2.80 release.
I tried to take into account copy flags to not mess with other IDs
(collections) when we are copying outside of Main, and also not do deg
tags when this is forbidden, but risk of something going wrong here is
too high...
|
|
assigned
The dvert layer was not assigned to the mesh data if it had to be
created by the dpaint modifier.
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D5263
|
|
Interferes with debugging.
|
|
Caused by error keeping the first memfile undo step.
|
|
Was a mistake in normals calculation: need to consider all grids for correct
average in the center of the face.
Reviewers: brecht
Reviewed By: brecht
Maniphest Tasks: T66712
Differential Revision: https://developer.blender.org/D5254
|
|
Particles can not be used with a destructive modifiers, so we can not
maker such configuration fully reliable.
Not sure this specific setup ever worked in 2.7x, maybe DM index was
somehow reset somewhere in particle system in older Blender version,
or maybe all of Blender version were crashing.
Anyway, seems to be very easy to avoid obvious index past the array
boundary in the mapping,
Reviewers: brecht, zeddb
Reviewed By: brecht
Maniphest Tasks: T66812
Differential Revision: https://developer.blender.org/D5257
|
|
This was caused by loose pointers.
This diff takes care of clearing the fields of other bones before deleting the pchan.
Reviewers: brecht, sergey
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D5258
|
|
The issue was the the copy data function didn't copy the active canvas number.
So it would always be 0 and thus use the first canvas when trying to bake.
Also fix not copying unused type data (unused canvas/brush settings).
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D5220
|
|
It should be based on the mesh bounds before modifier stack evaluation, but
some modifiers were causing it to be recomputed. The flag to disable texture
space recomputation was not preserved through modifier evaluation.
Differential Revision: https://developer.blender.org/D5225
|
|
No functional changes (currently unused).
|
|
This is needed step out of undo steps which accumulate changes,
larger changes could be made to handle this but better not
make them at this point.
|
