| Age | Commit message (Collapse) | Author |
|---|
|
Use CLAMP_MAX to remove redundant comparison.
|
|
|
|
|
|
These two operators (one for grease pencil, one for other objects)
copy a single modifier from the active object to all selected objects.
The operators are exposed in the dropdown menus in modifier headers.
Note that It's currently possible to drag and drop modifiers between
objects in the outliner, but that only works for dragging to one object
at a time. Modifiers can also be copied with the "Make Links" operator,
but that copies *all* modifiers rather than just one. The placement
and scope of these new operators allow for more useful poll messages
and error messages as well.
Every object type that supports modifiers is supported. Although hook
and collision modifiers aren't supported because of an unexplained
comment in `BKE_object_copy_modifier`, other than that, every modifier
type is supported, including particle systems, nodes modifiers, etc.
The new modifiers are set active, which required two small tweaks to
`object.c` and `particle.c`.
Reviewed By: Hans Goudey (with additional edits)
Differential Revision: https://developer.blender.org/D9537
|
|
Original comment from rB8a9dedf82954. See also T84084.
|
|
|
|
|
|
Having a centeral place to find a list of all library overrides should be
useful for managing production scenes where library overrides are used a lot.
This change adds the individually overridden properties of a data-block under
the data-block itself. Just how we show modifiers, constraints or pose channels
there. This way we can also expose library override operations/options better
in future.
There's also a filter option for the library overrides now, so they can be
hidden. It is only available in the View Layer display mode though, like the
other filter options.
One internal change this has to do is adding more informative return values to
undo pushes and the library override functions called by it. That way we can
send a notifier when library overrides change for the Outliner to know when to
rebuild the tree.
Differential Revision: https://developer.blender.org/D7631
Reviewed by: Andy Goralczyk, Bastien Montagne, William Reynish
|
|
This node updates the "rotation" attribute on points.
Multiple ways to specify the rotation are supported.
Differential Revision: https://developer.blender.org/D9883
Ref T83668.
|
|
Disclaimer: This workaround avoids crashing with current state of the
code and is only committed as temporary band-aid until we can assess the
full issue and decide if/how it needs to be adressed.
|
|
This fixes the main issue there (essentially a followup to
rB90e12e823ff0: Fix T81854: crash when undoing switch between sculpt and
edit mode).
We basically remove more (hopefully all the remaining!) modifications of
orig mesh from `sculpt_update_object`, as those done here will not be
immediately available in the evaluated data (that specific bug happened
because masking data was added to orig mesh there, but not flushed to
depsgraph evaluated one).
This also goes towards a better separation between handling of evaluated
data and orig one.
Note that modification of orig mesh data can still happen, e.g. values
in some cdlayers, but at least all pointers should now be valid in the
evaluated mesh.
There are still some issues, e.g. we now get an assert/crash in
`multires_reshape_assign_final_coords_from_ccg` when undoing out of the
Sculpt mode, presumably because subdiv_ccg data remains unchanged then
(and hence still has the `has_mask` flag set), while actual mesh data do
not have that cdlayer anymore...
This commit also cleans up/simplifies some code,
`ED_object_sculptmode_enter_ex` was (indirectly) calling
`BKE_sculpt_face_sets_ensure_from_base_mesh_visibility` twice e.g.
|
|
Mainly updated the Mantaflow version. It includes the new viscosity solver plugin based on the method from 'Accurate Viscous Free Surfaces for Buckling, Coiling, and Rotating Liquids' (Batty & Bridson).
In the UI, this update adds a new 'Viscosity' section to the fluid modifier UI (liquid domains only). For now, there is a single 'strength' value to control the viscosity of liquids.
|
|
|
|
Sometimes multiple calls to `bpy.data.orphans_purge()` are needed to
delete all orphans, because a call can turn previously-used datablocks
into orphans. Returning the number of deleted datablocks makes it
possible to keep looping until nothing can be deleted any more.
This patch keeps track of deletions in `id_delete()` so that it can be
returned up the call stack.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D9918
|
|
**Renames parms**:
| **old name** | **new name**
| old_value | lower_value
| target_value | blended_value
| value | strip_value
| inf | influence
**Reason**: {D8296} allows full nla stack evaluation with proper
keyframing support. These names should make it more intuitive how all
the data gets processed and inverted. Note, that I do use the term
"strip_value" instead of something like "fcurve_value" of the tweak
strip. Technically, "strip_value" is closer to what is solved for.
For example, if a noise fmodifier was active for the fcurve, then the
remapping would appear to be wrong. In the future, further solving can
be done afterward, outside of the nla system, to remove the effects of
fmodifiers.
**Renames functions**:
| nla_invert_blend_value | nla_blend_get_inverted_strip_value
| nla_invert_combine_value | nla_combine_get_inverted_strip_value
**Reason**: D8296 adds get_inverted_lower_value() variants,
so "invert" alone is too vague.
**Renames NlaKeyframingContext member**:
| nla_channels | lower_eval_data
**Reason**: D8296 evaluates the upper stack. This name makes it more
obvious what data is stored there.
No functional changes (relative to the dependency below)
Split from {D9247}
Depends on {D9694} since the code was so close to eachother.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D9695
|
|
Always assume geometry nodes produce potentially animated meshes or point
clouds. In general it is hard to check if geometry nodes are animated, and
for modifiers this was already weak.
The better solution will likely involving checking which geometry was
modified by the depsgraph on frame change, to replace the current mechanism
of manually checking for certain types of modifiers and animation.
|
|
This new node increases the radiance of an image by a scalar value.
Previously, the only way to adjust the the exposure of an image was with
math node or using the scene's color management.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D9677
|
|
|
|
API functions get SEQ_ prefix.
Intern functions get seq_ prefix
Functions also have appropriate category included in name.
|
|
In some cases the variables were set but never used anywhere.
Differential Revision: https://developer.blender.org/D9889
|
|
Ref: T82651
Normally people use "Combine XYZ" to input a vector, but it is more
interesting to have an explicit vector input.
So this is basically "Combine XYZ" without any input sockets, the values
are stored in the node itself.
Differential Revision: https://developer.blender.org/D9885
|
|
This patch introduces a partial update of GPUTexture. When rendering
a large image the GPUTexture could have been scaled. The old implementation
would rescale the image on CPU and create a new GPUTexture. This
resulted in flooding the PCI bus.
The new solution would only scale and upload the parts of the GPUTexture
that has been changed. It does this by keeping track of areas of 256x256
pixels. When something changes the tiles that cover that changes will be
rescaled and uploaded the next time the GPUTexture is requested.
Test situation: Default Cube, 4 samples, 19200x10800 tile size 512.
Blender 2.83.9: 4m27s.
Blender 2.91: 20+m (regression)
This patch: 1m01s.
There is still room for more optimizations:
* Reduce the time that an image is locked.
** Use task scheduling to update the tiles of an image.
** Generic optimization of the ImBuf scale method.
Maniphest Tasks: T82591
Differential Revision: https://developer.blender.org/D9591
|
|
There are more in the new mesh fairing code and in the poisson
distribution code, this commit doesn't fix those.
|
|
This patch adds two related nodes, a node for separating points
and mesh vertices based on a boolean attribute input, and a node
for creating boolean attributes with comparisons.
See the differential for an example file and video.
Point Separate (T83059)
The output in both geometries is just point data, contained in the mesh
and point cloud components, depending which components had data in the
input geometry. Any points with the mask attribute set to true will be
moved from the first geometry output to the second. This means that
for meshes, all edge and face data will be removed. Any point domain
attributes are moved to the correct output geometry as well.
Attribute Compare (T83057)
The attribute compare does the "Equal" and "Not Equal" operations by
comparing vectors and colors based on their distance from each other.
For other operations, the comparison is between the lengths of the
vector inputs. In general, the highest complexity data type is used
for the operation, and a new function to determine that is added.
Differential Revision: https://developer.blender.org/D9876
|
|
Currently, the random attribute node doesn't work well for most
workflows because for any change in the input data it outputs
completely different results.
This patch adds an implicit seed attribute input to the node, referred
to by "id". The attribute is hashed for each element using the CPPType
system's hash method, meaning the attribute can have any data type.
Supporting any data type is also important so any attribute can be
copied into the "id" attribute and used as a seed.
The "id" attribute is an example of a "reserved name" attribute,
meaning attributes with this name can be used implicitly by nodes like
the random attribute node. Although it makes it a bit more difficult
to dig deeper, using the name implicitly rather than exposing it as an
input should make the system more accessible and predictable.
Differential Revision: https://developer.blender.org/D9832
|
|
Some weird proxies apparently can have a local collection instancing...
Not sure this is even really valid for proxies, but in any case we
cannot override that, just detect and properly cancel the operation
then.
Should be backported to 2.91.1 should we do it.
|
|
Differential Revision: https://developer.blender.org/D9861
Ref T82585.
|
|
Callback function was using int while update_render_passes_cb_t was
using eNodeSocketDatatype leading to a build warning about different
argument types with MSVC.
|
|
This commit resolves problem introduced in e1665c3d3190 - it was
difficult to import media at their original resolution.
This is done by using original resolution as reference for scale.
All crop and strip transform values and their animation is converted
form old files.
To make both workflows easy to use, sequencer tool settings have been
created with preset for preffered scaling method. This setting is in
sequencer timeline header and add image or movie strip operator
properties.
Two new operators have been added:
`sequencer.strip_transform_fit` operator with 3 options: Scale To Fit,
Scale to Fill and Stretch To Fill.
Operator can fail if strip image or video is not loaded currently, this
case should be either sanitized or data loaded on demand.
`sequencer.strip_transform_clear` operator with 4 options:
Clear position, scale, rotation and all (previous 3 options combined).
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D9582
|
|
This adds a boolean attribute and custom data type, to be used in the
point separate node. It also adds it as supported data types in the
random attribute and attribute fill nodes.
There are more clever ways of storing a boolean attribute that make
more sense in certain situations-- sets, bitfields, and others, this
commit keeps it simple, saving those changes for when there is a proper
use case for them. In any case, we will still probably always want the
idea of a boolean attribute.
Differential Revision: https://developer.blender.org/D9818
|
|
This tool implements smearing for multires displacement over the limit
surface, similar to how smearing for colors and topology slide works.
When used the displacement values of the vertices "slide" over the
topology, creating the effect of smearing the surface detail.
As the brush just modifies displacement values instead of coordinates,
the total displacement of the affected area doesn't change. This means
that this smearing effect can be used multiple times over the same area
without generating any artifacts in the topology.
When the brush is used with the pinch or expand smear modes,
displacement differences are pushed into the same area, creating hard
surface effects without pinching the topology.
As any other brush that relies on the limit surface (like displacement
erasers), this will work better after using apply base.
Reviewed By: sergey, JulienKaspar, dbystedt
Differential Revision: https://developer.blender.org/D9659
|
|
When doing a debug build on windows, blender will
start with the following warning:
"Unable to find the python binary, the multiprocessing
module may not be functional!"
The root cause for this issue is: for a debug build
the python binary is called python_d.exe rather than
just python.exe
This change fixes BKE_appdir_program_python_search
to look for the _d suffix for debug builds on windows
Differential Revision: https://developer.blender.org/D9775
Reviewed by: Campbell Barton
|
|
We do not generate overrides for missing data-blocks (aka placeholder
ones) anymore, and properly delete the remaining old overrides of those
during the resync process.
This should prevent constant 'missing data-blocks' messages when opening
blend files with overrides whose libraries have beed edited.
Issue reported by @andy from Blender studio, thanks.
|
|
Issue was that not all code paths were taken to determine if
the GPU Texture was premultiplied or not. In this case the result
was set to unpremultiplied what is incorrect.
This fixes broken test case image alpha blend from image_colorspace.
|
|
Previously, the node was called Random Attribute. For consistency reasons,
we move the "Attribute" part of the name to the front.
|
|
|
|
This implements a mesh fairing algorithm and implements the fair
operations for Face Set edit. This edit operations create a smooth as
possible geometry patch in the area of the selected Face Set.
The mesh fairing algorithm is designed by Brett Fedack for the addon
"Mesh Fairing": https://github.com/fedackb/mesh-fairing, with some
modifications:
- The main fairing function in BKE_mesh_fair.h does not triangulate
the mesh. For the test I did in sculpt mode results are good enough
without triangulating the topology. Depending on the use and the
result quality needed for a particular tool, the mesh can be
triangulate in the affected area before starting fairing.
- Cotangents loop weights are not implemented yet. The idea is to
also expose the vertex and loop weights in a different function in
case a tool needs to set up custom weights.
This algorithm will also be used to solve the limitations of line
project and implement the Lasso Project and Polyline Project tools.
It can also be used in tools in other areas of Blender, like Edit Mode
or future retopology tools.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D9603
|
|
|
|
The `!BKE_previewimg_is_finished()` in `icon_preview_startjob_all_sizes()`
would fail.
Caused by 990bd9acf243ae. We have to be more picky about tagging previews as
unfinished after file read. But we also have to consider files stored in old
versions and set the unfinished tag as needed.
|
|
In D9722 we agreed on using `[home-directory]/Documents/Blender/Assets` for
the default asset library. I just forgot to do the change before committing.
(The default repository is just a named path, it's *not* a default library with
bundled assets.)
|
|
Previews would be flagged as unfinished when reading. Instead clear the flag
and always consider them finished upon reading. If we wouldn't do this, the
File Browser would keep running the preview updating to wait for the preview to
finish. It could be smarter and also check if there's actually a preview job
running.
Instead, I think it will just display an unfilled buffer for now. Up until
today we wouldn't even know if a stored preview is finished or not, so it would
always assume they are finished. We do the same now, but have the option to
make it smarter.
|
|
The Asset Browser will be a sub-editor of the File Browser. This prepares the
File Browser code for that.
**File-Lists**
* Support loading assets with metadata read from external files into the
file-list.
* New main based file-list type, for the "Current File" asset library.
* Refresh file-list when switching between browse modes or asset libraries.
* Support empty file-lists (asset library with no assets).
* Store file previews as icons, so scripts can reference them via icon-id. See
previous commit.
**Space Data**
* Introduce "browse mode" to differeniate between file and asset browsing.
* Add `FileAssetSelectParams` to `SpaceFile`, with `FileSelectParams` as base.
Makes sure data is separated between asset and file browsing when switching
between them. The active params can be obtained through
`ED_fileselect_get_active_params()`.
* `FileAssetSelectParams` stores the currently visible asset library ID.
* Introduce file history abstraction so file and asset browsing can keep a
separate history (previous and next directories).
**General**
* Option to only show asset data-blocks while file browsing (not exposed here).
* Add "active_file" context member, so scripts can get and display info about
the active file.
* Add "active_id" context member, so `ED_OT_lib_id_load_custom_preview` can set
a custom ID preview. (Only for "Current File" asset library)
* Expose some of `FileDirEntry` in RNA as (non-editable). That way scripts can
obtain name, preview icon and asset-data.
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9724
Reviewed by: Bastien Montagne
|
|
One of the core design aspects of the Asset Browser is that users can "mount"
custom asset libraries via the Preferences. Currently an asset library is just
a directory with one or more .blend files in it. We could easily support a
single .blend file as asset library as well (rather than a directory). It's
just disabled currently.
Note that in earlier designs, asset libraries were called repositories.
Idea is simple: In Preferences > File Paths, you can create custom libraries,
by setting a name and selecting a path. The name is ensured to be unique. If
the name or path are empty, the Asset Browser will not show it in the list of
available asset libraries.
The library path is not checked for validity, the Asset Browser will allow
selecting invalid libraries, but show a message instead of the file list, to
help the user understand what's going on.
Of course the actual Asset Browser UI is not part of this commit, it's in one
of the following ones.
{F9497950}
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9722
Reviewed by: Brecht Van Lommel, Hans Goudey
|
|
* Support defining (not necessarily rendering) icons in threads. Needed so the
File Browser can expose file previews with an icon-id to scripts.
** For that, ported `icons.c` to C++, to be able to use scope based mutex locks
(cleaner & safer code). Had to do some cleanups and minor refactoring for
that.
* Added support for ImBuf icons, as a decent way for icons to hold the file
preview buffers.
* Tag previews as "unfinished" while they render in a thread, for the File
Browser to dynamically load previews as they get finished.
* Better handle cases where threaded preview generation is requested, but the
ID type doesn't support it (fallback to single threaded). This is for general
sanity of the code (as in, safety and cleanness)
* Enabled asset notifier for custom preview loading operator, was just disabled
because `NC_ASSET` wasn't defined in master yet.
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9719
Reviewed by: Bastien Montagne, Brecht Van Lommel
|
|
This makes it possible to turn data-blocks into assets and back into normal
data-blocks. A core design decision made for the asset system is that not every
data-block should be an asset, because not every data-block is made for reuse.
Users have to explicitly mark data-blocks as assets.
Exposes "Mark Asset" and "Clear Asset" in Outliner context menus (currently ID
Data submenu) and button context menus. We are still not too happy with the
names, they may change.
This uses the new context members to pass data-blocks to operators, added in
af008f553293 and 0c1d4769235c.
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9717
Reviewed by: Brecht Van Lommel
|
|
Asset metadata is what turns a regular data-block into an asset. It is a small
data-structure, but a key part of the technical design of the asset system.
The design foresees that asset data-blocks store an `ID.asset_data` pointer of
type `AssetMetaData`. This data **must not** have dependencies on other
data-blocks or data-block data, it must be an independent unit. That way we can
read asset-metadata from .blends without reading anything else from the file.
The Asset Browser will use this metadata (together with the data-block name,
preview and file path) to represent assets in the file list.
Includes:
* New `ID.asset_data` for asset metadata.
* Asset tags, description and custom properties.
* BKE code to manage asset meta-data and asset tags.
* Code to read asset data from files, without reading IDs.
* RNA for asset metadata (including tags)
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9716
Reviewed by: Bastien Montagne, Brecht Van Lommel
|
|
This implements the design proposed in T83357.
The goal is to allow the geometry nodes modifier on mesh objects to
output instances and potentially other geometry types. Both problems
are tackled by allowing mesh objects to evaluate to a geometry set,
instead of just a single mesh id data block. The geometry set can
contain a mesh but also other data like instances and a point cloud.
I can't say that I'm sure that this commit won't introduce bugs. Mainly
the temporary object creation during rendering seems a bit brittle.
BUT, we can be reasonably sure that this commit will not introduce
regressions (at least not ones, that are hard to fix). This is because
the code has been written in a way that minimizes changes for existing
functionality.
Given that we intend to hide the point cloud object for the next release,
we won't even have to worry about temporary object creation for now.
An important part of the technical design is to make sure that
`ObjectRuntime->data_eval` contains the same data before and after this
patch. This helps to make sure, that existing code paths are impacted as
little as possible.
Instead of fully replacing `data_eval`, there is `geometry_set_eval`,
which contains all the geometry components an object evaluated to
(including the data referenced by `data_eval`).
For now, not much code has to be aware of `geometry_set_eval`. Mainly
the depsgraph object iterator and the instances system have to know
about it.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9851
|
|
The matte_id is stored in a different structure in 2.92. This patch will
write the old matte_id field so the files can be opened correctly in
older versions.
|
|
|
|
Fix an issue introduced by {f4df036bc497} where the read/write
code missed to store and read the mattes from its new location.
|
