Age | Commit message (Collapse) | Author |
|
Cyclic check was not checking for collections instanciated by objects...
|
|
This is actually a nice issue due to too much optimization...
* Making an ID local just reuse the linked one whenever possible, instead of
actually making a copy of it.
* Therefore, the collection containing that ID is seen as unchanged, since
the pointer itself remained the same.
* But on undo step, there is no way to reuse that local object, which then
gets deleted, and linked one gets re-created - at a different address.
* Collection, however, since unchanged, is not updated at all and thus keeps
reference to the to-be-deleted local object, instead of the linked one.
* Issue gets even worse with viewlayers, this leads to the crash.
To address this, this patch adds a 'virtual' update flags that does nothing
in update case, but will ensure that the affected IDs using the one made local
are properly detected as changed across the relevant undo step.
Note that the recalc flags were chosen mostly for a logical reason, and also
because they are already properly dealt with and cleared by undo code,
so this looks like the optimal solution.
Reviewed By: brecht
Maniphest Tasks: T77774
Differential Revision: https://developer.blender.org/D8006
|
|
Regression in deaff945d0b96.
|
|
This changes curve deform code not to set the objects inverse matrix,
this shouldn't cause problems as it's not used elsewhere afterwards.
|
|
|
|
- BKE_lattice_deform_data_create was init_latt_deform.
- BKE_lattice_deform_data_destroy was end_latt_deform.
- BKE_lattice_deform_data_eval_co was calc_latt_deform.
|
|
Also improve alignment.
|
|
|
|
Naming is from legacy code where the deforming object was the parent.
|
|
This is an improvement over 2.7x which converted edit-mesh to mesh
(CDDM) for all 3 modifiers.
Overall this increases performance in edit-mode by around 15-20%.
|
|
|
|
Now all overrides are handled that way. Performances of the process look
decent enough, even with production characters...
If performance issues still arise, we'll investigate other solutions.
This should also make T73154 obsolete now.
|
|
When a fluid is put under influence of gravity or acceleration, it
forms an internal pressure gradient, which causes observable effects
like buoyancy. Since now cloth has support for simulating pressure
changes caused by fluid compression or expansion, it makes sense to
also support the effects of gravity.
This is intended for better simulation of objects filled or
surrounded by fluids, especially when constrained by collisions
or pinned vertices, and should result in more realistic shapes.
Obviously, this doesn't actually simulate fluid dynamics; instead
it is assumed that the fluid immediately adapts to changes in the
shape or acceleration of the object without friction or turbulence,
and instantly reaches a new static equilibrium.
Differential Revision: https://developer.blender.org/D6442
|
|
Move armature/curve functions into their headers,
they were previously in BKE_lattice.h
|
|
|
|
- Use 'float (*)[3]' to avoid casts.
- Remove unnecessary float[3] copy in gpencil_deform_verts.
- Use MEM_SAFE_FREE
- Use const arguments.
|
|
Prefer meaningful function names over redundant NULL arguments.
Also clarify variable names as it wasn't obvious the object-data
is part of the object target.
|
|
|
|
Override collections do not support that, add proper checks in BKE code
adding objects to collections.
Also try to find a suitable collection in parents in that case.
Note that this is enforced on 'public' API level, internal code can
still bypass those checks if needed. Exposing this possibility to public
API should not be needed.
|
|
Followup to rB74ec37b70cbc8dc2, also missed a case in collection
deepcopy then.
|
|
Matches other similar cases for collection and object, and general
naming rule (copy is for generic ID copying, duplicate is for more
involved and poweful behaviors specific to an ID type).
|
|
This greatly simplifies and unifies logic.
Also addresses T77255: full scene copy will now use same preferences
parameters as object or collection duplicate to choose which data-blocks
to copy along.
|
|
Those are then assumed already duplicated, and not touched. However, all
of ther objects and sub-collections can still be processed as with any
other regular collection...
|
|
|
|
This commit enables basic copy of overrides on generic ID level, as well
as from (deep) copy operators for objects and collections.
So e.g. if your linked overridden caracter is in a collection, you can
now (from the outliner) Duplicate that override collection to get a new
overriding copy of the character.
We still need operators (new or modifying existing ones) to handle that
from 3DView e.g.
Note that deep copy code for objects/collections (and incidently
animdata) had to be modified to avoid duplicating/making local IDs that
remain linked ones being used by overrides ones.
|
|
Should separate the data-block name better from the library name and improve
readability.
|
|
This is related to T76659.
This just renames data type names to `CD_PROP_STRING`, `CD_PROP_FLOAT`
and `CD_PROP_INT32`. It makes them a bit more specific and removes
unnecessary abbreviations.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D7980
|
|
|
|
|
|
Previously, this function would expect a callback function as parameter.
This behavior is now in Map.lookup_or_add_cb. The new version just
takes the key and value directly.
|
|
Local datablocks (including overrides) need to have a unique name, which
can then differ from the reference linked one (especially when there are
several local overrides of a same linked data).
Issue is, ID name is a 'rna name property', and as such used as
reference when dealing with override of collections of IDs, so we cannot
have a changing name.
The solution implemented here should work and is simple, but it may have
some issues in corner cases (time will say), it is not really robust.
Alternative solution would be to store ID pointers as reference in
override operations, instead of there name. But that would potentially
add quiet a lot of overhead to foreach looping in `lib_query.c`.
|
|
|
|
This adds two data structures that wrap a node tree. However, they work
on different abstraction levels.
`NodeTreeRef` is an immutable structure that makes working with a node
tree in C++ much more efficient and convenient. It supports various
queries efficiently, that are not easily possible using just `bNodeTree`.
`DerivedNodeTree` builds on top of `NodeTreeRef`. It contains a flattened
view on the node tree, i.e. with node groups being inlined. Every inlined
node still knows its "call stack". It supports pretty much the same queries
as `NodeTreeRef`.
Both data structures come with a dot graph exporter for debugging purposes.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D7628
|
|
Reviewers: brecht
Differential Revision: https://developer.blender.org/D7965
|
|
|
|
|
|
This also renames `MutableArrayRef` to `MutableSpan`.
The name "Span" works better, because `std::span` will provide
similar functionality in C++20. Furthermore, a shorter, more
concise name for a common data structure is nice.
|
|
|
|
Check if the mask layer is used in a layer that is going to be used in the current viewlayer.
Related to T77667
|
|
We plan to use the "blender" namespace in other modules as well.
|
|
|
|
Avoid misunderstanding that caused T77609.
|
|
Caused by error in fix for T75965 (83d9ba341e5a).
|
|
The current particle state is stored in a `CustomData` instance and
the cache is stored in `PointCache`.
The current state exists on the copy-on-write copies of the simulation,
while the cache only exists in the original data block.
This patch implements a temporary trivial particle simulation that does not
use the node system yet. It is used for testing and will be replaced soon.
`PointCache` still has some limitations that need to be overcome using
separate refactorings. For example, we need to be able to store the number
of particles in the point cache. Also we need to change which attributes
are stored for a particle system more dynamically than is currently possible afaik.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D7836
|
|
current frame
Previously, the first frame was displayed from frame 0, but now, the first frame is only displayed when the current frame is equal or greater than the keyframe number.
The previous system was logical when the grease pencil was not an object, but now it seems more logical to display the keyframe if the current frame is equal to or greater than the keyframe number.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D7851
|
|
If a layer is used for masking, it cannot be filtered by viewlayer because the masked layer needs to have the mask layers in the draw pipeline.
This check is only done in final render.
|
|
When removing a vertex group from a Grease Pencil object, if the vertex group is not the last one that was added, the information for the remaining groups weights gets mixed up.
Minor edit of the patch for clang format.
Differential Revision: https://developer.blender.org/D7943
|
|
This patch implements the list panel system D7490 for modifiers.
It also moves modifier drawing to a callback in ModifierTypeInfo
in line with the extensible architecture refactoring goal T75724.
This adds a PanelRegister callback and utilities for registering
panels and subpanels. It also adds the callbacks for expansion saving
and drag and drop reordering described in D7490.
These utilities, callbacks, and other common UI elements shared
between modifiers live in MOD_ui_common.c.
Because modifier buttons are now in panels, we can make use of
subpanels for organization. The UI layouts also use the single
column layout style consistently used elsewhere in Blender.
Additionally, the mode-setting buttons are aligned and ordered
consistently with the outliner.
However, the large number of UI changes in this patch may mean
that additional polishing is required in master.
Thanks to William Reynish (@billreynish) who did a fair amount of the
layout work and to Julian Eisel (@Severin) for consistent help.
Differential Revision: https://developer.blender.org/D7498
|
|
|
|
|