Age | Commit message (Collapse) | Author |
|
It's common to load factory settings as a test without wanting to
overwrite your own settings on exit.
|
|
Cycles lights now use strength and color properties of the light outside
of the shading nodes, just like Eevee. The shading nodes then act as a
multiplier on this, and become optional unless textures, fallof or other
effects are desired.
Backwards compatibility is not exact, as we can't be sure which renderer
the .blend was designed for or even if it was designed for a single one.
If the render engine in the active scene is set to Cycles, lights are
converted to ensure overall light strength remains the same, and removing
unnecessary shader node setups that only included a single emission node.
If the engine is set to Eevee, we increase strength to remove the automatic
100x multiplier that was there to match Cycles.
Differential Revision: https://developer.blender.org/D4588
|
|
Cycles now uses the color space on the image datablock, and uses OpenColorIO
to convert to scene linear as needed. Byte images do not take extra memory,
they are compressed in scene linear + sRGB transfer function which in common
cases is a no-op.
Eevee and workbench were changed to work similar. Float images are stored as
scene linear. Byte images are compressed as scene linear + sRGB and stored in
a GL_SRGB8_ALPHA8 texture. From the GLSL shader side this means they are read
as scene linear, simplifying the code and taking advantage of hardware support.
Further, OpenGL image textures are now all stored with premultiplied alpha.
Eevee texture sampling looks a little different now because interpolation
happens premultiplied and in scene linear space.
Overlays and grease pencil work in sRGB space so those now have an extra
conversion to sRGB after reading from image textures. This is not particularly
elegant but as long as engines use different conventions, one or the other
needs to do conversion.
This change breaks compatibility for cases where multiple image texture nodes
were using the same image with different color space node settings. However it
gives more predictable behavior for baking and texture painting if save, load
and image editing operations have a single color space to handle.
Differential Revision: https://developer.blender.org/D4807
|
|
Fixes issue with Eevee always using viewport curve resolution.
|
|
Curve function had two arguments:
- for_render, which was originally supposed to be used to control
whether viewport or render visibility for modifiers is to be
used.
- use_render_resolution, which sounds like it is supposed to control
whether viewport or render resolution for curves is to be used.
What is totally confusing is that those arguments were used
interchangeably: sometimes use_render_resolution would control
modifiers visibility.
This commit makes it so there is one single argument for this.
Reviewers: brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D4850
|
|
For wome reason, tag to mark normals as needing recompute was commented
out instead of updated to new system, during conversion of DynaPaint
code for 2.8 new evaluation stack... Trivial fix.
|
|
Save modified preferences on exit by default,
with the option to disable this.
|
|
Previously it was only possible to load factory startup & preferences.
|
|
See T61578 for discussions and mockups.
Visibility Options
==================
We are adding more granular control over restriction columns in the outliner,
exposing "indirect only" and "holdout" as options, and change the way
users enable/disable collections in a viewlayer.
We also rename the object viewport restriction to hide instance.
So the options we have are:
Collection
----------
* Render Visibility
* Instance Visibility
* Selectable
(View) Layer Collection
-----------------------
* Enable
* Holdout
* Indirect Only
* Viewport
Shortcuts
=========
Isolate Collection
------------------
* Ctr + click isolates the collection.
It turns all its parents and children "visible", and all the other
collections "invisible".
If ALL the collections were already properly set, we re-set the
collections to their default value.
Set Collection Inside Collections and Objects
---------------------------------------------
* Shift + click: Set/unset inside collections and objects.
We only set objects values as well when we are in View Layer mode and
(obviously) when the objects have a matching property.
Icons
=====
Little reminder that we will need better icons for holdout, indirect only, and
probably instanced (nothing wrong with the current, but it differs from
the proposal when it is turned off).
Also, we need to decide where do we want the modifier/bones/... icons to
be (in which column) and ideally make sure their icons match the ones we
use for collections/objects.
At the moment those are using the screen icon, which is not being used
by collections.
Reviewers: brecht, billrey
Subscribers: pablovazquez
Differential Revision: https://developer.blender.org/D4823
|
|
|
|
|
|
Were ifdef-ed for a long time.
|
|
Allows for skipping either preferences or data-blocks.
Previously setup_app_data was used for both.
|
|
Tag preferences as dirty when changed (prepare for adding auto-save).
|
|
|
|
Versionning code generating collections from old 2.79 scene layers was
setting new collections' library from scene, but it also needs to
properly set the `LIB_TAG_INDIRECT` tag, otherwise localizing code does
not know what to do, and most of append process fails.
|
|
When using multiple viewlayers and switching between them the selection
gets buggy. The reason for this is that the select_id is updated based
on the index in the viewlayer. This makes the select_id not unique as
objects might be shared or not shared at all.
This fix will update the select_id on all objects in main. This will be triggered in all the selection operators.
Reviewed By: sergey, brecht
Maniphest Tasks: T55617
Differential Revision: https://developer.blender.org/D4824
|
|
* Timeline has summary collapsed to show only one row of keyframes.
* Cavity default is screen space curvature (faster).
* Scripting workspace text editor uses syntax highlight and line numbers.
* Marker lines enabled by default in all animation editors.
* Movie clip editor pivot point default to median.
Ref T63986.
|
|
|
|
|
|
|
|
Since scale is multiplicative, the appropriate way to partially copy
it is to use power. However, the influence slider of constraints uses
linear interpolation. Thus, there is no way to correctly split scale
via constraints without adding this feature.
In addition, this allows inverting scale by using negative powers,
fulfilling the function of Copy Rotation's Invert checkboxes.
|
|
Add a new option that makes the Spline IK solver apply volume
preservation on top of the original scaling, considering the
pre-IK scale of the bone as the goal volume to be preserved.
This basically works similar to the Stretch To constraint, and
allows easily rigging a stretchy chain that uniformly follows
its parent's scaling.
Since the Stretch To behavior is more familiar, the new option
is on by default for newly created Spline IK constraints.
|
|
This happened to be a bigger rabbit hole to hell than it originally seemed,
and there are higher priority design tasks to be handled (at this point high
priority design task is more important than high priority bug fix).
After talking to Brecht the decision was made to revert to the known isolated
issue, which will allow everyone in the studio work same as prior to last
Friday.
The remaining bits will be worked on after all the design tasks are out of
the way.
This commit reverts:
4cdb4b9532c Fix T64161: Crashing using undo and multiple windows
064273a4ae7 Sound: Port more cases to be a part of dependency graph
2e582f8ab53 Sound: Fix access wrong dependency graph
5fc49d9c915 Sound: add stubs to build without audaspace
c68c81a870b Sound: Make sure spin lock is initialized for new sound datablocks
c02534469ac Sound: Delay creating sound scene handle for until is needed
9f681bea68f Fix T64144: Crash when displaying audio waveforms in VSE
2f79286453e Cleanup: unused vars
bed8ad6f95a Fix crash in background rendering after recent sound changes
773691310f9 Fix T64143: Crash when scrubbing in the graph editor
888852055c1 Sound: Fix for being unable to jump to a frame during playback with A/V sync
6ab7b384645 Sound: More fixes for access of original scene
35db1195455 Sound: Fix access original scene during playback
211c4fd2e9a Depsgraph: Make comment about evaluation more obvious
c5fe16e121e Sound: Make sound handles only be in evaluated datablocks
b4e1e0946bf Depsgraph: Preserve sound and audio pointers through copy-on-write
4eedf784b04 Depsgraph: Store original sequencer strip pointer
6990ef151c1 Sound: Move evaluation to dependency graph
d02da8de23b Sound: Delay opening handlers for until really needed
3369b828916 Depsgraph: Add scene audio component
e8f10d64757 Depsgraph: Tag sequencer for update on changes
6e4b7a6e4d9 Depsgraph: Initial work to cover sequencer
17447ac5a6b Depsgraph: Make sound ID part of the graph
|
|
|
|
|
|
After a lot of thinking about this, I decided that all operation modes
that I've tried over the past couple of years, including the original
2.79 one, have their uses after all. Thus the only reasonable solution
is to add yet another option.
The modes are:
- Strict: The current 2.80 mode, which overrides the original scaling
of the non-free axes to strictly preserve the volume. This is the most
obvious way one would expect a 'Maintain Volume' constraint to work.
- Uniform: The original 2.79 mode, which assumes that all axes have been
scaled the same as the free one when computing the volume. This seems
strange, but the net effect is that when simply scaling the object
uniformly with S, the volume is preserved; however, scaling the non-
free axes individually allows deviating from the locked volume.
This was obviously intended as a more or less convenient UI tool.
- Single Axis: My own variant of the intent of the Uniform scale, which
does volume-preserving if the object is scaled just on the Free axis,
while passing the non-free axis scaling through. I.e. instead of
uniform S scaling, the user has to scale the object just on its
primary axis to achieve constant volume. This can allow reducing the
number of animation curves when only constant volume scaling is needed,
or be an easier to control tool inside a complex rig.
|
|
Unlike location and rotation, there is a meaningful definition of
overall/average scaling via the total change in the volume. This
adds an option to retrieve that via a single driver variable,
instead of having to use three and an expression.
Using the determinant to compute the volume scaling also allows
detecting flipping due to negative scale - this is impossible
to do via the three variable approach.
The volume_scale functions are added purely for code readability:
'volume scale factor' is easier to understand than determinant.
Differential Revision: https://developer.blender.org/D4803
|
|
Mainly covers RNA callbacks which were still doing direct scene update,
which was causing crashes. Now corresponding ID_RECALC flags are used,
so all scenes can update accordingly.
Also tested animated volume/pitch on strips, which now works as well.
Fixes T64133: Assert after changing FPS
Fixes T64154: Immediate crash when changing the current frame on the timeline
Fixes T64185: Client Crashes when the frame position value is changed
Fixes T64190: Blender Crash using Timeline Editor
Fixes T64128: Click to close bug type on timeline
Fixes T64147: Crash when setting current frame from Python
Fixes T64152: Blender Auto-Close on timeline change
|
|
Usually the brush type is correct, but for some old files the brush could be a not valid type. In this case, returns the object active material.
This is related to T61413
|
|
|
|
Should have been done as a part of 9f681bea68f.
|
|
|
|
Workbench/Eevee now displays multiple multi-materials correctly.
Iterate over pbvh nodes when doing object iteration. This makes the
rendering process more streamlined and allow for using different materials.
This change will make possible to:
- Add culling pass of each pbvh leaf node. (speedup if zoomed on a small
area)
- Reduce number of lead node iteration.
- Reduce code complexity
|
|
|
|
|
|
|
|
|
|
Quite straightforward change, which makes it so audio handles are
only created inside of evaluated datablocks.
Exception is adding sound strip to the sequencer, which needs an
audio handle to query length and number of channels. This is done
by temporarily loading sound file into an original datablock, and
then tossing it away.
There is an assert in sound.c which verifies that audio system is
used from an evaluated domain, which should help porting all the
cases which are likely missed by this commit.
Some annoying parts:
- `BKE_sound_update_scene()` is iterating over all bases, and does
special ID tags to see whether sound has been handled or not
already. This can not be done the old fashion now.
Ideally, this will be done as a speaker datablock evaluation,
but seems that would require a lock since audio API is not safe
for threading. So this is not a desired way i'd say.
Possible solution here would be to iterate over ID datablocks
using dependency graph query API.
- Frame jump needs to call `BKE_sound_seek_scene()` directly
because there might be some flags assigned to the scene which
could be clear after operator execution is over.
Need to verify if that's the case though. This is a bit hairy
code, so sticking to a safest and known to work approach for
now.
- Removed check for format when opening new sound file.
Maybe we can have some utility function which queries channel
and duration information, leaving the caller's code clean and
tidy.
Tested following cases:
- Adding/removing/moving sequencer's sound strips.
- Adding/moving speakers in viewport.
- Rendering audio.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D4779
|
|
The sound handles are still in the original datablocks, so it's easier
to test since there should be no functional changes.
|
|
Needs to be done in order to localize sound handlers to the evaluated
IDs only. This commit might not be fully optimal, since it does more
things on every scene update request, but that will be solved by the
upcoming change which will put those updates to a dependency graph.
|
|
started with recent UV Sculpt tool-system integration rB928becec60d1
Fixes T64094
Reviewers: brecht
Maniphest Tasks: T64094
Differential Revision: https://developer.blender.org/D4788
|
|
Quiet extra-semi-stmt & missing-variable-declarations
|
|
- Add `render_aa` and `viewport_aa` sampling setting for workbench. 0
samples means no AA, 1 sample uses FXAA and more samples will use
TAA.
The viewport `gpu_viewport_quality` can still limit viewport anti-aliasing
method.
- Use TAA when rendering images. (this used to be CPU based FSAA)
- Removed `R_OSA` related settings.
Reviewers: fclem, brecht
Maniphest Tasks: T60847
Differential Revision: https://developer.blender.org/D4773
|
|
This flag becomes stuck in certain situations, causing the marker
camera switch feature to not work.
To fix old files with the problem, clear the flag on file load.
Also, the line that is supposed to clear it has wrong bit math,
causing seq_render_scene_strip to effectively toggle the flag on or
off every time it's run, instead of restoring to original state.
The flag and code were added in 001789d7337a by @campbellbarton.
|
|
|
|
when the scene is referenced as a strip from another VSE scene
Fix T49658: Evaluation / animation of f-curves does not correct
for a scene's position within another scene
Solution: Evaluate animdata before rendering scene seqbase.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D4755
|
|
* The cache file datablock is now evaluated as part of the dependency graph,
creating/freeing the Alembic file handle matching the current frame.
Modifiers and constraints depend on this evaluation.
* Cache file handles and readers now only exist on COW datablocks, never the
original ones.
* Object data paths are flushed back to the original for the user interface.
* The cache file keeps a list of all readers associated with its handle, and
automatically frees them when the handle is freed. This kind of sharing of
data across datablocks is weak but we have no better mechanism for it.
Fix T62720: Alembic sequences not working and crashing
Differential Revision: https://developer.blender.org/D4774
|
|
This partially mitigates the performance drop in Spring
02_055_A.anim caused by dependency changes in D4715.
Differential Revision: https://developer.blender.org/D4753
|
|
Fix crash when unlinking scene and "Use Sequence" property is set.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D4756
|