Age | Commit message (Collapse) | Author |
|
My benchmark which spend most time preparing function parameters
takes `250 ms` now, from `510 ms` before. This is mainly achieved by
doing less unnecessary work and by giving the compiler more inlined
code to optimize.
* Reserve correct vector sizes and use unchecked `append` function.
* Construct `GVArray` parameters directly in the vector, instead of
moving/copying them in the vector afterwards.
* Inline some constructors, because that allows the compiler understand
what is happening, resulting in less code.
This probably has negilible impact on the user experience currently,
because there are other bottlenecks.
Differential Revision: https://developer.blender.org/D15009
|
|
|
|
* Port over new code tables from Cycles
* Convert Rec.709 to scene linear for lookup table.
* Move code for wavelength and blackbody to IMB so they can access the
required transforms, which are not in blenlib.
* Remove clamping from blackbody shader to bypass the texture read.
Since it's variable now easiest to just always read from the texture
than pass additional parameters.
* Fold XYZ to RGB conversion into the wavelength table.
Ref T68926
|
|
Handle separately as fileops.c had to be tested on multiple platforms.
|
|
|
|
`_BLI_assert_abort`.
Using `BLI_assert(0)` should typically be avoided now that we have
`BLI_assert_unreachable`...
|
|
Replace some `if/else if` chains by proper `switch` statement.
Replace some `BLI_assert(0)` calls by `BLI_assert_unreachable()` ones.
|
|
Also add missing task-ID reference & remove colon after \note as it
doesn't render properly in doxygen.
|
|
This is useful without any functionality specific to attribute domains,
rename to `BLI_str_format_decimal_unit` to follow naming of a similar
function `BLI_str_format_byte_unit`.
|
|
GPU code used `sz` as an abbreviation for size, as well as a few other
places. Use size where this represents a size in bytes, see: T85728.
|
|
|
|
Adds some utility functions to avoid using toupper() which depends on the
locale and should not be used for this type of parsing.
|
|
Inspired by D12936 and D12929, this patch adds general purpose
"Combine Color" and "Separate Color" nodes to Geometry, Compositor,
Shader and Texture nodes.
- Within Geometry Nodes, it replaces the existing "Combine RGB" and
"Separate RGB" nodes.
- Within Compositor Nodes, it replaces the existing
"Combine RGBA/HSVA/YCbCrA/YUVA" and "Separate RGBA/HSVA/YCbCrA/YUVA"
nodes.
- Within Texture Nodes, it replaces the existing "Combine RGBA" and
"Separate RGBA" nodes.
- Within Shader Nodes, it replaces the existing "Combine RGB/HSV" and
"Separate RGB/HSV" nodes.
Python addons have not been updated to the new nodes yet.
**New shader code**
In node_color.h, color.h and gpu_shader_material_color_util.glsl,
missing methods hsl_to_rgb and rgb_to_hsl are added by directly
converting existing C code. They always produce the same result.
**Old code**
As requested by T96219, old nodes still exist but are not displayed in
the add menu. This means Python scripts can still create them as usual.
Otherwise, versioning replaces the old nodes with the new nodes when
opening .blend files.
Differential Revision: https://developer.blender.org/D14034
|
|
Differential Revision: https://developer.blender.org/D14745
|
|
The fix ensures that the reference count for `IShellItem *pSI` is decremented,
preventing a memory leak. For `IFileOperation *pfo` the decrement of the
reference count is only attempted when `CoCreateInstance` is successful.
Additionally, the gotos have been replaced with nested if/else statements.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14681
|
|
The ported normal calculation from ceed37fc5cbb466a0 neglected to
use the tilt attribute to rotate the normals around the tangents.
This commit adds that behavior back, adding a new math header file
to avoid duplicating the rotation function for normalized axes.
Differential Revision: https://developer.blender.org/D14655
|
|
Prefer using immVertex3f when 3D shaders are used for 2D rendering due to overhead of vertex padding in hardware. CPU overhead is negligible.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D14494
|
|
- Missing star prefix.
- Unnecessary indentation.
- Blank line after dot-points
(otherwise doxygen merges with the previous dot-point).
- Use back-slash for doxygen commands.
- Correct spelling.
|
|
lengths along a set of points. This can be used for the sample curves
node, or finding new points along a curve when extending
or shrinking it.
This commit uses it in the snake hook brush as an example.
The logic is similar to the uniform length sampling, but the next
sample length is retrieved from the input instead of multiplication.
For the sample node in the future, though this sort of sampling can be
potentially done more efficiently for specific curve types besides
poly curves, it's simpler, at least as a start, to work on a set of
evaluated points that can be treated like a poly curve.
Differential Revision: https://developer.blender.org/D14571
|
|
This frequently showed up in profiling but shouldn't.
This also updates the code to use atomics for more correctness and
adds multi-threading for better performance.
|
|
Method which overrides a base class's virtual methods are expetced to
be marked with `override`. This also gives better idea to the developers
about what is going on.
|
|
This does two things:
* Introduce new `materialize_compressed` methods. Those are used
when the dst array should not have any gaps.
* Add materialize methods in various classes where they were missing
(and therefore caused overhead, because slower fallbacks had to be used).
|
|
Contributed by luzpaz.
Differential Revision: https://developer.blender.org/D14443
|
|
This adds a new Grow/Shrink brush which is similar to the Length
brush in the old hair system.
* It's possible to switch between growing and shrinking by hold
down ctrl and/or by changing the direction enum.
* 3d brush is supported.
* Different brush falloffs are supported.
* Supports scaling curves uniformly or shrinking/extrapolating
them. Extrapolation is linear only in this patch.
* A minimum length settings helps to avoid creating zero-sized curves.
Differential Revision: https://developer.blender.org/D14474
|
|
|
|
|
|
Also replace "num" with:
- "number" when it's not used to denote the number of items.
- "digits" when digits in a string are being manipulated.
|
|
This commit adds calculation of lengths along the curve for each
evaluated point. This is used for sampling, resampling, the "curve
parameter" node, and potentially more places in the future.
This commit also includes a utility for calculation of uniform samples
in blenlib. It can find evenlyspaced samples along a sequence of points
and use linear interpolation to move data from those points to the
samples. Making the utility more general aligns better with the more
functional approach of the new curves code and makes the behavior
available elsewhere.
A "color math" header is added to allow very basic interpolation
between two colors in the `blender::math` namespace.
Differential Revision: https://developer.blender.org/D14382
|
|
The code that eats away faces until you find input faces in
the Constrained Delaunay Triangulation goes too far and crashes
when there are no input faces. In the test case there were input
faces but they only had two vertices, so were all ignored.
|
|
Follow conventions from T85728.
|
|
This is useful to save time manually averaging many timing results.
The minimum is included because often it can be more stable than an
average, and it can help to expose calls from other contexts with lower
times that would make the average useless.
Differential Revision: https://developer.blender.org/D14417
|
|
In a test file from T96282, this commit reduces the runtime of the
delete geometry node from 82 ms to 23 ms, a 3.6x improvement.
Writing to vertex groups in other cases should be faster too.
The largest improvement comes from not writing a new weight
of zero if the vertex is not in the group. This mirrors the behavior
of custom data interpolation in `layerInterp_mdeformvert`.
Other improvements come from using `set_all` for writing
output attributes and implementing that method for vertex groups.
I also implemented `materialize` methods. Though I didn't obverse
an improvement from this, I think it's best to remove virtual method
call overhead where it's simple to do so.
The test file for the delete geometry node needs to be updated.
These methods could be parallelized too, but better to do that later.
Differential Revision: https://developer.blender.org/D14420
|
|
New supported features:
* 3D/spherical brush that samples a good position on the curves.
* Falloff.
The custom falloff curve mapping is not yet available in the ui because that
requires some more ui reorganization. This is better done when we have
a better understanding of what settings we need exactly.
Currently, the depth of the 3d brush is only sampled once per stroke, when
first pressing LMB. Sometimes it is expected that the depth of the brush can
change within a single brush. However, implementing that in a good way
is not straight forward and might need additional options. Therefore that
will be handled separately. Some experimentation results are in D14376.
Ref T96445.
Differential Revision: https://developer.blender.org/D14376
|
|
And wrap tbb::parallel_sort in blender namespace similar to other TBB
functionality.
|
|
Previously, the conversion was done manually for a fixed set of types.
Now, there is a more general utility that can be used in other contexts
(outside of geometry nodes attribute processing) as well.
|
|
This is a follow up to rB2252bc6a5527cd7360d1ccfe7a2d1bc640a8dfa6.
|
|
Mainly -Wset-but-unused-variable.
Makes default compilation on macOS way less noisy.
Differential Revision: https://developer.blender.org/D14357
|
|
For more detail about `CPPType`, see `BLI_cpp_type.hh` and D14367.
Differential Revision: https://developer.blender.org/D14367
|
|
|
|
Use <pre>..</pre> for pseudo-code.
|
|
Follow naming from T85728.
|
|
The constant M_PI_4 is added to GLSL to ensure it works there too.
Differential Revision: https://developer.blender.org/D14288
|
|
|
|
|
|
Correct misspellings in code comments of "vertex" and "vertices".
See D13932 for more details.
Differential Revision: https://developer.blender.org/D13932
Reviewed by Harley Acheson
|
|
Differential Revision: https://developer.blender.org/D14223
|
|
The main goal here is to add the boilerplate code to make it possible
to add the actual sculpt tools more easily. Both brush implementations
added by this patch are meant to be prototypes which will be removed
or refined in the coming weeks.
Ref T95773.
Differential Revision: https://developer.blender.org/D14180
|
|
Sometimes it is useful to get the index ranges that are in an index mask.
That is because some algorithms can process index ranges more efficiently
than generic index masks.
Extracting ranges from an index mask is relatively efficient, because it is
cheap to check if a span of indices contains a contiguous range.
|
|
|
|
|