| Age | Commit message (Collapse) | Author |
|---|
|
|
|
* Simplify workspace API a bit
* Comment on behavior of workspace-layout relations where exposed in API
* Remove annoying getters/setters
* Avoid lookups if we can early exit
* A NULL check is removed in `direct_link_workspace()` that I don't see
a need for. Am not 100% sure though, fingers crossed.
In general these changes should improve readability and make things
easier to reason about.
|
|
|
|
Seriously... Please comply with design and do not add 2.9x versionning
code to 2.8x versioning functions!
|
|
Versioning for workspaces didn't update the map used to determine which
layout is active for a workspace in a specific window. Library code now
called the function to make a workspace active (even if it already was
active), which would also use this map to determine the active layout --
the wrong one.
Error in initial workspace integration, but only uncovered recently.
Likely through 0d8a8ce03b99.
|
|
When editing a complex curve is very annoying to have all handles at a time. Also, this is a requirement for the current GSoC Edit Grease Pencil using curves.
I have seen that this improvement can be used in any other area of blender, so I have decided to publish the option in the overlay panel..
Reviewed By: fclem, #user_interface, billreynish, Severin
Differential Revision: https://developer.blender.org/D7754
|
|
|
|
This error was introduced wit the change in commit https://developer.blender.org/rB6a850f3cc840
As the brushes were not created, all modes except Edit were broken.
Now, the brushes and palette are not created when load the file in versioning code, but when the mode is enabled.
Also, if the brush already exist, the parameters are not reset as it was done in the versioning code in order to keep user settings.
The same logic is used for the default palette.
|
|
Changes for 2.90 versioning.
|
|
|
|
|
|
|
|
This removes grease pencil brush creation/dat-block delete on load,
since this causes duplicate data-blocks.
Add assert to prevent this happening in the future
since the error is isn't obvious.
|
|
This is not required.
|
|
|
|
The file attached in the report has a cloth brush saved with a particle
mass of 0.0, which causes all sort of issues in the solver. I don't know
how that brush was created, but it does not seems to be possible to do
in the current version (reset values are correct, property limits are
correct and a default brush is created in versioning_defaults). This
resets all brushes with an invalid value to 1.0.
Reviewed By: jbakker
Maniphest Tasks: T75347
Differential Revision: https://developer.blender.org/D7698
|
|
Conflicts:
release/scripts/startup/bl_ui/properties_render.py
source/blender/blenkernel/BKE_blender_version.h
|
|
This parameter allows to define the threshold for SMAA algorithm.
Differential Revision: https://developer.blender.org/D7708
|
|
|
|
Before, the material name was used to filter the effect of the stroke, but after the last changes in the ID code, now it's not working.
After talking with @severin, we agreed to replace the material name with a pointer. Also, this fix a design issue when the materials were linked.
Related to T76594
Differential Revision: https://developer.blender.org/D7681 with some minor changes
|
|
Now the brushes have several new random settings and use curves to define the effect. The curves have been moved below the parameter to keep UI standards and extra curve panels have been removed.
{F8505387}
The new curves are:
* Hue.
* Saturation.
* Value.
New option to random at stroke level instead to random at point level for the following values:
* Thickness.
* Strength.
* UV.
* Hue.
* Saturation.
* Value.
Curves have been moved below the corresponding parameter and only are displayed in properties panel. Display the curves in the popover made it unusable.
{F8505392}
Also, the Pressure random has been renamed to Radius because the old name was not clear enough.
Reviewed By: mendio, pablovazquez
Differential Revision: https://developer.blender.org/D7577
|
|
All the driver-specific code in `fcurve.c` has been moved into a new file
`fcurve_driver.c`. The corresponding declarations have been moved from
`BKE_fcurve.h` to `BKE_fcurve_driver.h`.
All the `#include "BKE_fcurve.h"` statements have been investigated and
replaced with `BKE_fcurve_driver.h` where necessary.
No functional changes.
|
|
Reviewers: sebbas
Differential Revision: https://developer.blender.org/D7483
|
|
Own error in cleanup from 5dcb6fb22f3f unintentionally
changed enum values. Although this code violated our own
rules to use explicit values to avoid this happening.
|
|
|
|
Removed old duplicated brushes and change the settings of some brushes.
|
|
The patching of brushes was not done.
|
|
This crashes with ASAN enabled.
```
==39366==ERROR: AddressSanitizer: memcpy-param-overlap: memory ranges [0x6230000ae848,0x6230000ae85a) and [0x6230000ae851, 0x6230000ae863) overlap
```
|
|
of small geometry details.
* Implemented the algortihm that would merge vertices to the weighted
center between them.
* Exposed the merge threshold to the user.
The new default tolerance is 0.0001 (versionning code ensures that
previous default value remains in use to avoid any change in existing
files).
Review and minor changes/cleanups from Bastien Montagne (@mont29).
|
|
Missing versioning after `rB9f4b090eec39`.
Differential Revision: https://developer.blender.org/D7388
|
|
|
|
Screen loop was inside an existing screen loop,
in the body of a function used to initialize the toolbar region.
|
|
Feature can be enabled or disabled in timeline view menu item "Show F-Curves".
Author a.monti
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D7205
|
|
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
|
|
Part of T74432.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
|
|
Follow up of b2ee1770d4c3 and 10c2254d412d, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
|
|
Continuation of b2ee1770d4c3, now non-single word variables are also
renamed.
Part of T74432.
Also ran clang-format on affected files.
|
|
This adds the Voxel Mode to the current remesh modifier. It works
exactly the same way as the voxel remesh operator and uses the same
properties to control the remeshing. We can exand this with more options
in the future (fix poles, reprojection...)
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7292
|
|
|
|
Modify the view layer add operator (and underlying `BKE_view_layer_add`)
to allow for copying the current view layer, as well as adding a new one
but with all LayerCollections disabled by default (this is important for
heavy scenes where currently adding view layers can take a long time due
to enabling every collection by default).
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D6862
|
|
|
|
BKE_gpencil_geom.h
This split prepare the code for future geometry functions.
|
|
|
|
NOTE: While most of the milestone 1 goals are there, a few smaller features and
improvements are still to be done.
Big picture of this milestone: Initial, OpenXR-based virtual reality support
for users and foundation for advanced use cases.
Maniphest Task: https://developer.blender.org/T71347
The tasks contains more information about this milestone.
To be clear: This is not a feature rich VR implementation, it's focused on the
initial scene inspection use case. We intentionally focused on that, further
features like controller support are part of the next milestone.
- How to use?
Instructions on how to use this are here:
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/How_to_Test
These will be updated and moved to a more official place (likely the manual) soon.
Currently Windows Mixed Reality and Oculus devices are usable. Valve/HTC
headsets don't support the OpenXR standard yet and hence, do not work with this
implementation.
---------------
This is the C-side implementation of the features added for initial VR
support as per milestone 1. A "VR Scene Inspection" Add-on will be
committed separately, to expose the VR functionality in the UI. It also
adds some further features for milestone 1, namely a landmarking system
(stored view locations in the VR space)
Main additions/features:
* Support for rendering viewports to an HMD, with good performance.
* Option to sync the VR view perspective with a fully interactive,
regular 3D View (VR-Mirror).
* Option to disable positional tracking. Keeps the current position (calculated
based on the VR eye center pose) when enabled while a VR session is running.
* Some regular viewport settings for the VR view
* RNA/Python-API to query and set VR session state information.
* WM-XR: Layer tying Ghost-XR to the Blender specific APIs/data
* wmSurface API: drawable, non-window container (manages Ghost-OpenGL and GPU
context)
* DNA/RNA for management of VR session settings
* `--debug-xr` and `--debug-xr-time` commandline options
* Utility batch & config file for using the Oculus runtime on Windows.
* Most VR data is runtime only. The exception is user settings which are saved
to files (`XrSessionSettings`).
* VR support can be disabled through the `WITH_XR_OPENXR` compiler flag.
For architecture and code documentation, see
https://wiki.blender.org/wiki/Source/Interface/XR.
---------------
A few thank you's:
* A huge shoutout to Ray Molenkamp for his help during the project - it would
have not been that successful without him!
* Sebastian Koenig and Simeon Conzendorf for testing and feedback!
* The reviewers, especially Brecht Van Lommel!
* Dalai Felinto for pushing and managing me to get this done ;)
* The OpenXR working group for providing an open standard. I think we're the
first bigger application to adopt OpenXR. Congratulations to them and
ourselves :)
This project started as a Google Summer of Code 2019 project - "Core Support of
Virtual Reality Headsets through OpenXR" (see
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/).
Some further information, including ideas for further improvements can be found
in the final GSoC report:
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/Final_Report
Differential Revisions: D6193, D7098
Reviewed by: Brecht Van Lommel, Jeroen Bakker
|
|
|
|
The versioning was setting the factor for all modes without checking flags.
Also cleanup some unused code.
|
|
Both are doing almost the same and can be merged. This reduce complexity for user and less code to maintain.
Reviewed By: mendio, pepeland, fclem
Differential Revision: https://developer.blender.org/D7134
|
|
This extends the ocean modifier to add new spectra
(Pierson-Moskowitz, Jonswap, TMA).
These models are very different to the Phillips spectrum.
They are intended for more established,
large area, oceans and/or shallow water situations.
|
|
'Private' can be a rather confusing term, especially when considering
its meaning in programming languages.
So now root node trees and master collections are 'embedded' IDs
instead.
|
|
|
