| Age | Commit message (Collapse) | Author |
|---|
|
Only formatting changes found by running "make format", no functional
changes
Committed without review, but with verbal approval by Hans Goudey
|
|
This commit removes the implementations of legacy nodes,
their type definitions, and related code that becomes unused.
Now that we have two releases that included the legacy nodes,
there is not much reason to include them still. Removing the
code means refactoring will be easier, and old code doesn't
have to be tested and maintained.
After this commit, the legacy nodes will be undefined in the UI,
so 3.0 or 3.1 should be used to convert files to the fields system.
The net change is 12184 lines removed!
The tooltip for legacy nodes mentioned that we would remove
them before 4.0, which was purposefully a bit vague to allow
us this flexibility. In a poll in a devtalk post showed that the
majority of people were okay with removing the nodes.
https://devtalk.blender.org/t/geometry-nodes-backward-compatibility-poll/20199
Differential Revision: https://developer.blender.org/D14353
|
|
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
Based on discussions from T95355 and T94193, the plan is to use
the name "Curves" to describe the data-block container for multiple
curves. Eventually this will replace the existing "Curve" data-block.
However, it will be a while before the curve data-block can be replaced
so in order to distinguish the two curve types in the UI, "Hair Curves"
will be used, but eventually changed back to "Curves".
This patch renames "hair-related" files, functions, types, and variable
names to this convention. A deep rename is preferred to keep code
consistent and to avoid any "hair" terminology from leaking, since the
new data-block is meant for all curve types, not just hair use cases.
The downside of this naming is that the difference between "Curve"
and "Curves" has become important. That was considered during
design discussons and deemed acceptable, especially given the
non-permanent nature of the somewhat common conflict.
Some points of interest:
- All DNA compatibility is lost, just like rBf59767ff9729.
- I renamed `ID_HA` to `ID_CV` so there is no complete mismatch.
- `hair_curves` is used where necessary to distinguish from the
existing "curves" plural.
- I didn't rename any of the cycles/rendering code function names,
since that is also used by the old hair particle system.
Differential Revision: https://developer.blender.org/D14007
|
|
This patch refactors the "Hair" data-block, which will soon be renamed
to "Curves". The larger change is switching from an array of `HairCurve`
to find indices in the points array to simply storing an array of offsets.
Using a single integer instead of two halves the amount of memory for that
particular array.
Besides that, there are some other changes in this patch:
- Split the data-structure to a separate `CurveGeometry`
DNA struct so it is usable for grease pencil too.
- Update naming to be more aligned with newer code and the style guide.
- Add direct access to some arrays in RNA
-- Radius is now retrieved as a regular attribute in Cycles.
-- `HairPoint` has been renamed to `CurvePoint`
-- `HairCurve` has been renamed to `CurveSlice`
- Add comments to the struct in DNA.
The next steps are renaming `Hair` -> `Curves`, and adding support
for other curve types: Bezier, Poly, and NURBS.
Ref T95355
Differential Revision: https://developer.blender.org/D13987
|
|
The Cycles accurate mode was removed, but the Eevee option for this has
a different meaning and should not have been removed. The Eevee accurate
makes cryptomatte accumulate for every sample, which Cycles has always
done regardless of any option.
|
|
When node input sockets are animated, they target the socket by index.
As a result, animation data needs to be updated whenever new sockets are
added (except when they're added at the end of the list). The code for
this is now extracted into its own versioning function, so that it can
be used for other versioning steps as well.
No functional changes.
|
|
In future use cases, a volume can contain many grids that represent the
density information. In this case, it's better if the volume to mesh node
creates a mesh based on all of the grids in the volume.
This is also a benefit to share-ability, since one doesn't have to
specify the grid name in the node. Instead, in the future we can have
a way to split particular grids into separate volumes, if only one
grid should be considered.
The code changes are relatively simple:
- Move the old volume to mesh node to the legacy folder.
- Run the volume to mesh node on all instance geometry, like elsewhere.
- Make the blenkernel's volume to mesh API a bit more specific.
Differential Revision: https://developer.blender.org/D12997
|
|
Re-alphabetize the main add menu.
Rename Node ID Names:
FloatCompare => CompareFloats
AttributeCapture => CaptureAttribute
Boolean => MeshBoolean
CurveFill => FillCurve
CurveFillet => FilletCurve
CurveReverse => ReverseCurve
CurveSample => SampleCurve
CurveResmaple => ResampleCurve
CurveSubdivide => SubdivideCurve
CurveTrim => TrimCurve
MaterialReplace => ReplaceMaterial
MeshSubdivide => SubdivideMesh
EdgeSplit => SplitEdges
Differential Revision: https://developer.blender.org/D12865
|
|
This node replaces the deprecated Attribute Randomize node, populating
a vector, float, integer or boolean field with random values. Vector,
float, and integer have min/max settings, which are also field aware.
The boolean type has a probability value for controlling what portion
of the output should be true. All four types have a field seed input
which is implicitly driven by the index, otherwise, all values would
be the same "random" value.
The Random Float node is now deprecated like other nodes, since it is
redundant with this node.
Differential Revision: https://developer.blender.org/D12603
|
|
This includes much improved GPU rendering performance, viewport interactivity,
new shadow catcher, revamped sampling settings, subsurface scattering anisotropy,
new GPU volume sampling, improved PMJ sampling pattern, and more.
Some features have also been removed or changed, breaking backwards compatibility.
Including the removal of the OpenCL backend, for which alternatives are under
development.
Release notes and code docs:
https://wiki.blender.org/wiki/Reference/Release_Notes/3.0/Cycles
https://wiki.blender.org/wiki/Source/Render/Cycles
Credits:
* Sergey Sharybin
* Brecht Van Lommel
* Patrick Mours (OptiX backend)
* Christophe Hery (subsurface scattering anisotropy)
* William Leeson (PMJ sampling pattern)
* Alaska (various fixes and tweaks)
* Thomas Dinges (various fixes)
For the full commit history, see the cycles-x branch. This squashes together
all the changes since intermediate changes would often fail building or tests.
Ref T87839, T87837, T87836
Fixes T90734, T89353, T80267, T80267, T77185, T69800
|
|
Move overlay flags into SequencerPreviewOverlay and
SequencerTimelineOverlay structs.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12569
|
|
Recently we have decided to avoid fancier versioning for nodes with
string inputs for attribute names when updating the attribute workflow
for 3.0. In that case we would just duplicate any node that will
have an updated version to work with fields.
We want to be able to use the "proper" ID names for the new versions
of the nodes though, so this patch adds "Legacy" to the IDs of all
nodes that will be replaced in 3.0. This commit also removes the nodes
from the add menu when the fields experimental preference is enabled,
in order to make it clear what has been updated and what hasn't.
Nodes in the "Maybe" categories in versioning_300.c can be renamed
later if necessary. For now it's probably better to be conservative,
and to keep the list complete.
Differential Revision: https://developer.blender.org/D12420
|
|
Previously fluid simulation and Alembic modifiers had a dedicated function
to query the velocity for motion blur. Now use a more generic system where
those modifiers output a velocity attribute.
Advantages:
* Geometry and particle nodes can output velocity through the same mechanism,
or read the attribute coming from earlier modifiers.
* The velocity can be preserved through modifiers like subdivision surface or
auto smooth.
* USD and Alembic previously only output velocity from fluid simulation, now
they work with velocity from other sources too.
* Simplifies the code for renderers like Cycles and exporters like
Alembic and USD.
This breaks compatibility:
* External renderers and exporters accessing these velocities through the
Python API now need to use the attribute instead.
* Existing modifier node setups that create an attribute named "velocity"
will render differently with motion blur.
Differential Revision: https://developer.blender.org/D12305
|
|
|
|
Callers that require lazy initialization can use SEQ_editing_ensure.
|
|
|
|
|
|
|
|
Versioning code for converting strip offset property doesn't work, when
property was animated and disabled or when crop was used.
When offset property is animated and offset is enabled, animation is
converted to be used with new transform design. When offset is disabled,
animation is left untouched. New transform design doesn't have option
to disable offset, and therefore old unconverted animation is used
instead of converted static value.
Remove animation from propery if it was unused.
Another issue was that both X and Y offset animation was being corrected
by factor caluclated for X channel.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11370
|
|
Adds `source/blender/blendloader/intern/versioning_common.cc` and
`versioning_common.h` for version independent versioning functions.
I only placed `do_versions_add_region_if_not_found()` in there for now.
`blo_do_version_old_trackto_to_constraints()` could also be added, but
that's so old, I prefer keeping that in `versioning_legacy.c`.
|
|
Previously, the "follow path constraint" and "follow parented curve"
were clamped. This restriction was lifted in rBcf2baa585cc8
Add back an option to get the old behavior in the "Path animation" settings.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D11263
|
|
Text data block were not considered special in the recursive purge
function. So they would get deleted if they had no actual users.
To fix this we instead make text data block use "fake user" so that
addon authors can specify script files that should be removed if nothing
is using it anymore.
Per default, new text object have "fake user" set. So functionality
wise, the user has to explicitly specify that they want the text object
to be purge-able.
Reviewed By: Bastien
Differential Revision: http://developer.blender.org/D10983
|
|
The `bisect_distance` in the mirror modifier was hard-coded to `0.001`.
This would result in some unexpected behavior like vertices close
to the mirror plane being deleted or merged.
The fix now adds a parameter to the mirror modifier to expose the
bisect distance to the user. The default is set to the previous
hard-coded value to not "change" previous files.
Ref D10201
|
|
Caused by {rB571362642201} where versioning code for new sequencer tool
settings was only done for scenes already having sequencer scene->ed.
If scene->ed was not present, sequencer tool settings were never
initalized for this scene [if the VSE was then used later], leading to
crashes in some places.
Now just use the versioning code to initalize sequencer tool settings
for all scenes not having them yet.
Maniphest Tasks: T87010
Differential Revision: https://developer.blender.org/D10996
|
|
|
|
This introduces a context path to the spreadsheet editor, which contains
information about what data is shown in the spreadsheet. The context
path (breadcrumbs) can reference a specific node in a node group
hierarchy. During object evaluation, the geometry nodes modifier checks
what data is currently requested by visible spreadsheets and stores
the corresponding geometry sets separately for later access.
The context path can be updated by the user explicitely, by clicking
on the new icon in the header of nodes. Under some circumstances,
the context path is updated automatically based on Blender's context.
This patch also consolidates the "Node" and "Final" object evaluation
mode to just "Evaluated". Based on the current context path, either
the final geometry set of an object will be displayed, or the data at
a specific node.
The new preview icon in geometry nodes now behaves more like
a toggle. It can be clicked again to clear the context path in an
open spreadsheet editor.
Previously, only an object could be pinned in the spreadsheet editor.
Now it is possible to pin the entire context path. That allows two
different spreadsheets to display geometry data from two different
nodes.
The breadcrumbs in the spreadsheet header can be collapsed by
clicking on the arrow icons. It's not ideal but works well for now.
This might be changed again, if we get a data set region on the left.
Differential Revision: https://developer.blender.org/D10931
|
|
This code is incompatible with .blend files from subversion 16 and 17.
The ideal would be to create a new subversion when landed rBf674976edd88.
But for now, due to the delay, moving the code to the previous subversion
can solve it.
|
|
Since you can already specify a separate size for X and Y with the
grid node, it makes sense to be able to specify the size separately
for each axis also.
This also avoids some awkward math with a Transform node afterwards
when you want a specific size for each direction.
Versioning (except for animation and drivers) is handled in this commit.
Differential Revision: https://developer.blender.org/D10834
|
|
This fixes T86440
As the CU_2D flag is set for nurbs, a Curve can have 2D nurbs mixed with 3D.
But the UI does not allow this mixing. It updates all nurbs to 2D or 3D when set.
So remove this specific flag for nurbs.
This may break old files, since 2D curves with mixed 3D are now set as 3D.
Differential Revision: https://developer.blender.org/D10738
|
|
Previously, `node_name` was rarely actually a name of a node. It is set
correctly as node name in `ED_node_tree_push`. However, later on it
was overwritten by the name of an id data block in `node_draw_space`.
Now, the node_name stays the name of the "parent" node. Whereas
display_name is the name that will be displayed in the breadcrumbs.
With this change, the `node_name` can be used to reconstruct the
actual path from the root node tree to the currently visible tree.
Differential Revision: https://developer.blender.org/D10874
|
|
This simulates the effect of a honeycomb or grid placed in front of a softbox.
In practice, it works by attenuating rays coming off-angle as a function of the
provided spread angle parameter.
Setting the parameter to 180 degrees poses no restrictions to the rays, making
the light behave the same way as before this patch.
The total light power is normalized based on the spread angle, so that the
light strength remains the same.
Differential Revision: https://developer.blender.org/D10594
|
|
Due to T64791 we must still use the old Lamp name rather than Light, work
around that for now.
|
|
For other "Attribute Name" fields we usually give a more specific name
that relates to what the attribute is actually used for, like "Mask" in
the point separate node. This is a similar situation, and would also
be consistent with the naming planned in D10506.
|
|
Display the bone axes at the head (root) of the bone by default, instead
of the tail (tip), and add a slider so that it's possible to adjust this
position.
Versioning code is in place to ensure existing files behave the same
(axes shown at tail), whereas new Armatures will be using the new
default (axes shown at head).
Reviewed By: #animation_rigging, #user_interface, Severin, Sybren
Differential Revision: https://developer.blender.org/D7685
|
|
Although "Grid" may not be techincally correct since a grid could be 3D,
it was decided to rename the "Plane" primtive to "Grid". The primitive
node allows subdivisions, so the name is more consistent with the
operator in the 3D view.
Ref T86819
This commit includes a file subversion bump for the versioning.
|
|
The attribute domain of old nodes should be set to `ATTR_DOMAIN_AUTO`.
|
|
|
|
This adds 2 new sliders for light objects that modulates the diffuse
light and the volume light intensities.
This also changes the way volume light is computed using point lamp
representation. We use "Point Light Attenuation Without Singularity"
from Cem Yuksel instead of the usual inverse square law.
|
|
Following concerns raised in the commit that changed the name initially,
rB2e19509e60b39837, it makes more sense to keep the "Surface" name for
this node because it has a specific meaning that should not be confused
with other types of subdivision.
|
|
rB91561629cd0b removed the versioning code added in rBb617b4441961
for the spreadsheet status bar. This commit simply adds it back.
|
|
- Remove Full Render size from VSE preview size. Use just 100% instead.
- Add Use Proxies checkbox to control whether proxies are used globally
- Move preview size to top so it is most prominent
- Set default to 100% preview size and use proxies
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D10362
|
|
In the current implementation, cryptomatte passes are connected to the node
and elements are picked by using the eyedropper tool on a special pick channel.
This design has two disadvantages - both connecting all passes individually
and always having to switch to the picker channel are tedious.
With the new design, the user selects the RenderLayer or Image from which the
Cryptomatte layers are directly loaded (the type of pass is determined by an
enum). This allows the node to automatically detect all relevant passes.
Then, when using the eyedropper tool, the operator looks up the selected
coordinates from the picked Image, Node backdrop or Clip and reads the picked
object directly from the Renderlayer/Image, therefore allowing to pick in any
context (e.g. by clicking on the Combined pass in the Image Viewer). The
sampled color is looked up in the metadata and the actual name is stored
in the cryptomatte node. This also allows to remove a hash by just removing
the name from the matte id.
Technically there is some loss of flexibility because the Cryptomatte pass
inputs can no longer be connected to other nodes, but since any compositing
done on them is likely to break the Cryptomatte system anyways, this isn't
really a concern in practise.
In the future, this would also allow to automatically translate values to names
by looking up the value in the associated metadata of the input, or to get a
better visualization of overlapping areas in the Pick output since we could
blend colors now that the output doesn't have to contain the exact value.
Idea + Original patch: Lucas Stockner
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D3959
|
|
This implements the status bar as footer region in the
spreadsheet editor.
It shows the total number of rows and columns as well
as how many rows are actually visible (based on the filter).
The implementation stores the stats in a runtime struct during
drawing and the status bar reads from that struct.
Ref T86142.
Differential Revision: https://developer.blender.org/D10693
|
|
This makes the following changes to the name of the two
geometry nodes subvision nodes:
- `Subdivision Surface` -> `Subdivide Smooth`
- `Subdivision Surface Simple` -> `Subdivide`
Most of the benefit is that the names are shorter, but it also better
mirrors the naming of operations in edit mode, and phrases the names
more like actions. This was discussed with the geometry nodes team.
|
|
But this time the root cause. Writing undo files is done in a separate
thread. This patch moved the updating of the matte_id when the user
actually changes the matte.
|
|
This clamp the volumetric shadow samples to the actual old max to avoid
problematic slowdown after the bugfix rB3a29c19b2bff.
|
|
Caused by e1f3996d740c, `seq_update_meta_disp_range()` did not check if
sequencer data exists.
|
|
|
