| Age | Commit message (Collapse) | Author |
|---|
|
Saving with only a filename (from Python) wasn't being prevented,
while it would successfully write the file to the working-directory,
path remapping and setting relative paths wouldn't work afterwards
as `Main.filepath` would have no directory component.
Disallow this since it's a corner case which only ever occurs
when path names without any directories are used from Python,
the overhead of expanding the working-directory for all data saving
operations isn't worthwhile.
The following changes have been made:
- bpy.ops.wm.save_mainfile() without a filepath argument
fails & reports and error when the file hasn't been saved.
Previously it would write to "untitled.blend" and set the
`G.main->filepath` to this as well.
- bpy.ops.wm.save_mainfile(filepath="untitled.blend")
fails & reports and error as the filename has no directory component.
- `BLI_path_is_abs_from_cwd` was added to check if the path would
attempt to expand to the CWD.
|
|
Revert part of the fix from 073669dd8588a3b80dfffee98b4f239b4baee8c8
that initialized the file-path on first save as it's no longer needed.
Also remove relbase argument to BLI_path_normalize as the destination
file paths shouldn't use relative locations.
|
|
In almost all cases there is no difference between `G.relbase_valid`
and checking `G.main->filepath` isn't an empty string.
In many places a non-empty string is already being used instead of
`G.relbase_valid`.
The only situation where this was needed was when saving from
`wm_file_write` where they temporarily became out of sync.
This has been replaced by adding a new member to `BlendFileWriteParams`
to account for saving an unsaved file for the first time.
Reviewed By: brecht
Ref D13564
|
|
Use "filepath" which is the current convention for naming full paths.
- Main use "name" which isn't obviously a file path.
- BlendFileData & FileGlobal used "filename" which is often
used for the name component of a path (without the directory).
|
|
Ref T92709
|
|
|
|
The main goal of this refactor is to make BPath module use `IDTypeInfo`,
and move each ID-specific part of the `foreach_path` looper into their
own IDTypeInfo struct, using a new `foreach_path` callback.
Additionally, following improvements/cleanups are included:
* Attempt to get better, more consistent namings.
** In particular, move from `path_visitor` to more standard `foreach_path`.
* Update and extend documentation.
** API doc was moved to header, according to recent discussions on this
topic.
* Remove `BKE_bpath_relocate_visitor` from API, this is specific
callback that belongs in `lib_id.c` user code.
NOTE: This commit is expected to be 100% non-behavioral-change. This
implies that several potential further changes were only noted as
comments (like using a more generic solution for
`lib_id_library_local_paths`, addressing inconsistencies like path of
packed libraries always being skipped, regardless of the
`BKE_BPATH_FOREACH_PATH_SKIP_PACKED` `eBPathForeachFlag` flag value,
etc.).
NOTE: basic unittests were added to master already in
rBdcc500e5a265093bc9cc.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13381
|
|
|
|
|
|
Compressing blendfiles can help save a lot of disk space, but the slowdown
while loading and saving is a major annoyance.
Currently Blender uses Zlib (aka gzip aka Deflate) for compression, but there
are now several more modern algorithms that outperform it in every way.
In this patch, I decided for Zstandard aka Zstd for several reasons:
- It is widely supported, both in other programs and libraries as well as in
general-purpose compression utilities on Unix
- It is extremely flexible - spanning several orders of magnitude of
compression speeds depending on the level setting.
- It is pretty much on the Pareto frontier for all of its configurations
(meaning that no other algorithm is both faster and more efficient).
One downside of course is that older versions of Blender will not be able to
read these files, but one can always just re-save them without compression or
decompress the file manually with an external tool.
The implementation here saves additional metadata into the compressed file in
order to allow for efficient seeking when loading. This is standard-compliant
and will be ignored by other tools that support Zstd.
If the metadata is not present (e.g. because you manually compressed a .blend
file with another tool), Blender will fall back to sequential reading.
Saving is multithreaded to improve performance. Loading is currently not
multithreaded since it's not easy to predict the access patterns of the
loading code when seeking is supported.
In the future, we might want to look into making this more predictable or
disabling seeking for the main .blend file, which would then allow for
multiple background threads that decompress data ahead of time.
The compression level was chosen to get sizes comparable to previous versions
at much higher speeds. In the future, this could be exposed as an option.
Reviewed By: campbellbarton, brecht, mont29
Differential Revision: https://developer.blender.org/D5799
|
|
Instead of handling mmap, compression etc. all directly in readfile.c, refactor
the code to use a generic FileReader.
This makes it easier to add new compression methods or similar, and allows to
reuse the logic in other places (e.g. thumbnail reading).
Reviewed By: campbellbarton, brecht, mont29
Differential Revision: https://developer.blender.org/D5799
|
|
This should help reducing false 'changed' status detection when reading
back a memfile undo step.
Related to T90593 & D12242.
|
|
callbacks.
This was not really useful, and added estra useless steps in case and ID
should not actually be written.
Further more, it prevented clearing the usercount on write, which can be
cause a false positive 'chanhged' detection in undo/redo case.
|
|
In the `FileList` struct, rename the `AssetLibraryReference
*asset_library` field to `asset_library_ref` -- it's a description of
which asset library is used, and not the asset library itself.
This is to make space for a future `AssetLibrary *asset_library` field,
which will point to an actual asset library struct/class.
No functional changes.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D12151
|
|
While doxygen supports both, conform to our style guide.
Note that single back-tick's are already used in a majority of comments.
|
|
This shows the text as part of the assertion message.
|
|
Also use doxy style function reference `#` prefix chars when
referencing identifiers.
|
|
|
|
This patch fixes many minor spelling mistakes, all in comments or
console output. Mostly contractions like can't, won't, don't, its/it's,
etc.
Differential Revision: https://developer.blender.org/D11663
Reviewed by Harley Acheson
|
|
This change was prompted by D6408 which moves thumbnail extraction into
a shared function that happens use these endian defines but only links
blenlib.
There is no need for these defines to be associated with globals
so move into their own header.
|
|
Previously all blend files included the path they were saved,
causing files distributed publicly to include users local paths.
This also included developers home directories for startup & userprefs
defaults & app-templates bundled with Blender.
Now recovery information is only written for auto-save & quit.blend
since this is the only time they're intended to be used.
|
|
The `MAX_LIBARRAY` define was an annoying doublon to the `INDEX_ID_MAX` enum value
now defined in `DNA_ID.h`, and it is no more useful.
And comments were somewhat outdated. Also added an explanation about
chosen order for the `INDEX_ID_<IDTYPE>` order.
|
|
It makes sense to support writing double arrays just like floats.
This is just split from a patch (D9697) to slim it down some.
|
|
One of the core design aspects of the Asset Browser is that users can "mount"
custom asset libraries via the Preferences. Currently an asset library is just
a directory with one or more .blend files in it. We could easily support a
single .blend file as asset library as well (rather than a directory). It's
just disabled currently.
Note that in earlier designs, asset libraries were called repositories.
Idea is simple: In Preferences > File Paths, you can create custom libraries,
by setting a name and selecting a path. The name is ensured to be unique. If
the name or path are empty, the Asset Browser will not show it in the list of
available asset libraries.
The library path is not checked for validity, the Asset Browser will allow
selecting invalid libraries, but show a message instead of the file list, to
help the user understand what's going on.
Of course the actual Asset Browser UI is not part of this commit, it's in one
of the following ones.
{F9497950}
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9722
Reviewed by: Brecht Van Lommel, Hans Goudey
|
|
Remove DNA headers, using forward declarations where possible.
Also removed duplicate header, header including it's self
and unnecessary inclusion of libc system headers from BKE header.
|
|
|
|
|
|
|
|
|
|
Ref T76372.
|
|
Ref T76372.
|
|
Ref T76372.
|
|
Ref T76372.
|
|
Ref T76372.
|
|
Ref T76372.
|
|
Ref T76372.
|
|
|
|
Ref T76372.
|
|
Ref T76372.
|
|
Ref T76372.
|
|
Ref T76372.
|
|
Ref T76372.
|
|
|
|
Ref T76372.
|
|
|
|
There should not be much user visible here (other than T73668 being addressed).
I added the writing code already for the initial implementation of workspaces,
but we decided to keep it disabled until the top-bar design is more clear. It
was never planned to keep this disabled for so long.
Fixes T73668.
|
|
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9349
|
|
|
|
I could not easily move `direct_link_screen` yet, because it
has a return value. That has to be solved differently at some point.
|
|
There should be no functional changes.
Eventually, it would be good to handle the different space types
using callbacks.
Ref T76372.
|
