Age | Commit message (Collapse) | Author |
|
|
|
Caused leaks reading old files, was read/written but not freed,
remove since its unused.
|
|
Also remove temp preview overwriting.
|
|
|
|
comments...
|
|
linked libraries cases.
Good old dead-brain stupid error when iterating over a linked list from which you remove some items...
|
|
|
|
Some area were still not in sync with readfile.c, now should be better.
Note that readfile.c has been used as référence here re us refcounting,
not sure how accurate it is, time will say :|
|
|
There are most likely some more still, but think this should now be inline with
libquery looper...
|
|
|
|
Factorized writing of ID block's data (so far, only IDProps) into own helper func.
This also fixes missing IDProp (aka custom data) saving from GreasePencil and Library
datablocks (and add comment about why we do not save WM IDProps).
Finaly, it ensures all ID-related data are written immediately after the ID itself
(was not the case for all data types previously, some were writting their own data
before IDProps). This is not a fix (.blend file format does not enforce any order
on sub-data of datablocks, they only have to be after datablock struct itself in file),
but makes things more consistent.
|
|
Was using O(n^2) lookup on ID's with undo.
This caused undo to hang with 1000's of data-blocks
(especially with heavy scenes & outliner-space, which doesn't even need to be visible to cause a slow-down).
Internally this uses a ghash per id-type, which is lazy-initialized.
Each key uses the name and library since there may be name collisions between libraries.
Developer Notes:
- Adds small `BKE_main_idmap_*` API.
- Needed to change linking order for this to build.
|
|
Instead index libraries, makes minor speedup when using many libraries.
|
|
Allows to avoid generating flipped faces when using extreme normal modifications.
Related to T48576.
|
|
|
|
in this case we only need to check if any id's need to be read.
|
|
|
|
ID's have a flag member too, best avoid confusion here.
|
|
This way it is now possible to toggle between material and rendered shading
while previously rendered viewport will always go back to solid shading.
|
|
The idea of pole merge is to fade interocular distance after a certain
altitude to zero when altitude goes closer to a pole. This should prevent
annoyances looking up in the sky or down to the bottom.
Works for both panorama and perspective cameras when Spherical Stereo
is enabled.
Reviewers: dfelinto, brecht
Reviewed By: brecht
Subscribers: sebastian_k
Differential Revision: https://developer.blender.org/D1998
|
|
This commit/patch/branch brings a bunch of powerful new options for B-Bones and
for working with B-Bones, making it easier for animators to create their own
rigs, using fewer bones (which also means hopefully lighter + faster rigs ;)
This functionality was first demoed by Daniel at BConf15
Some highlights from this patch include:
* You can now directly control the shape of B-Bones using a series of properties
instead of being restricted to trying to indirectly control them through the
neighbouring bones. See the "Bendy Bones" panel...
* B-Bones can be shaped in EditMode to define a "curved rest pose" for the bone.
This is useful for things like eyebrows and mouths/eyelids
* You can now make B-Bones use custom bones as their reference bone handles,
instead of only using the parent/child bones. To do so, enable the
"Use Custom Reference Handles" toggle. If none are specified, then the BBone will
only use the Bendy Bone properties.
* Constraints Head/Tail option can now slide along the B-Bone shape, instead of
just linearly interpolating between the endpoints of the bone.
For more details, see:
* http://aligorith.blogspot.co.nz/2016/05/bendy-bones-dev-update.html
* http://aligorith.blogspot.co.nz/2016/05/an-in-depth-look-at-how-b-bones-work.html
-- Credits --
Original Idea: Daniel M Lara (pepeland)
Original Patch/Research: Jose Molina
Additional Development + Polish: Joshua Leung (aligorith)
Testing/Feedback: Daniel M Lara (pepeland), Juan Pablo Bouza (jpbouza)
|
|
This commit adds some of the initial support for a properties region in the
Action Editor. There are currently no panels to display, as there is still
a lot of work required to port over the required internal architecture to
support the panels seen in the Graph Editor.
|
|
After some test, a new iteration parameter has been added in order to
apply repetitive smoothing to the stroke. By default 1 iteration is applied,
but can used any number between 1 and 3.
The repetition uses different levels of intensity from 100% of the defined smooth
factor for the first loop, 50% for the second and 25% for the third. We use in each
loop a smaller value in order to avoid deform too much the stroke.
|
|
|
|
Improve filling for concave shapes using a triangulation of the stroke.
The triangulation information is saved in an internal cache and only is
recalculated if the stroke changes.
The triangulation is not saved in .blend file.
Reviewers: aligorith
Maniphest Tasks: T47102
Differential Revision: https://developer.blender.org/D1705
|
|
D1930 by @NiKoZLaB
|
|
|
|
- BKE_blender_version.h (only version defines & versionstr).
- BKE_blender_copybuffer.h (currently only used for view3d copy/paste).
- BKE_blender_undo.h (global undo functions).
- BKE_blendfile.h (high level blend file read/write API).
|
|
- Access with Shift-LMB or from the 'Create' toolbar tab.
- Uses curve fitting for bezier curves, with error and corner angle options.
- Optional tablet pressure to curve radius mapping.
- Depth can use the cursor or optionally draw onto the surface,
for the entire stroke or using the stroke start.
- Stroke plane can optionally be perpendicular to, or aligned to the surface normal.
- Optional radius tapering and for start/end points.
- Supports operator redo and calling from Python.
|
|
Unexpectedly found out what was going wrong here. If a file was saved with a filebrowser open, we searched for the channel region in the wrong list (see 'ListBase *regionbase = (sl == sa->spacedata.first) ? &sa->regionbase : &sl->regionbase;').
Minor annoyance is that I had to move the loookup to the 2.77.1 version patch now.
|
|
Own mistake in 802bb422671
Apparently we only store one preview region for all views, didn't know that (makes sense though).
|
|
|
|
readfile.c would increment object usercount in three places, where it should not.
Remember kids: Objects are **only** refcounted by Scene's bases, and Object->proxy!
|
|
Steps to reproduce were:
* Open default video editing layout
* Drag down or click '+' icon in upper right corner of sequencer view
* A preview region appears, even though the view type is not set to sequencer-preview split mode
Another bug that has been there since ages :/ Reported by @Blendify via IRC, thanks!
|
|
loading.
|
|
Previously it would average all points under the brush, giving an off feedback loop that often depended on the
direction of the brush stroke, giving not-very-useful smearing effect.
Now blend brush smooths between connected edges.
|
|
|
|
|
|
increase 'real' user count.
This has several benefits:
* User count remains coherent, regardless of the order in which you use 'user_one' & real refcounting users
(i.e. if you add to group, and then link in scene, or the reverse, you now always get same final user count).
* Avoids the need to check for potential 'user_one' extra user in count in several places in code (e.g. when
making IDs single users...).
* Users won't wonder why they cannot make 'single user' and ID even though its user count shows '2'!
* readfile.c now always uses code from BKE's library.c when modifying id->us. Which means we can consider
(asside from assignment during initialization) that id->us is read-only outside of library.c context.
Note that this commit reverts previous one (rB6b1d77a8052b) - please **do not** backport this one in 2.77.
|
|
handle users own default startup files, among others...).
|
|
Current startup .blend has old (percent?) values for particle brush strength.
Since rBe4e21480d6331903c90ab073746484498441e1ac, UI controls do not clamp automatically values anymore,
which means when you first enable comb (or any other brush) you get a 50 strength, waaaayyyy to powerful.
This commit fixes this in `BLO_update_defaults_startup_blend`, note that it does not fix custom users'
startup files, nothing to do here...
|
|
|
|
|
|
The issue was happening when having unconnected point density which
will cache data but will not free it because there's no actual call
to the actual sampling.
Now the idea is to make sure cache is zeroed on file load and undo
and then caching via RNA will free the data if any exists. This could
leave us with a single copy of cache in the node if it's not used,
but it's quite small amount of memory and it's not leaking.
|
|
Without this, grabbing with normal weight will continually select new normals
based on where you move the cursor,
causing the normal location to flicker in a way which isn't controllable in any useful way.
|
|
BKE_main_id_tag_/BKE_main_id_flag_ were horrible naming now that we split those
into flags (for presistent one) and tags (for runtime ones).
Got rid of previous 'tag_' functions behavior (those who were dedicated shortcuts
to set/clear LIB_TAG_DOIT), so now '_tag_' functions affect tags, and '_flag_'
functions affect flags.
|
|
This made byte & float images behave differently, where other modifiers remain the same.
Also remove scene from the modifier (should have been passed as arg but no longer needed).
|
|
Workaround for T46962 still works
|
|
caused by 6081f6c3
|
|
This amends 089d2a18 which was a known driver bug (T46962),
increasing the clipping to avoid precision issues.
|