Age | Commit message (Collapse) | Author |
|
|
|
|
|
|
|
Thanks to MiikaH for pointing out.
|
|
|
|
|
|
|
|
'offsetof(BHeadN, bhead))'
|
|
in cases when they've got parenting to motion tracking data.
|
|
|
|
|
|
|
|
|
|
Error flags set on Drivers and F-Curves when they can't be evaluated or flushed
properly are now cleared when loading files, allowing drivers to be re-evaluated
when a file is reloaded. This means that if a driver couldn't be used in the
previous session due to the set of extension modules active at the time (and was
thus disabled), reloading the file with the necessary extensions loaded means
that the driver can work out of the box without manually re-enabling.
|
|
|
|
|
|
Issue was caused by performing conversion from FTFaces to materials from
the end of lib_link_mesh, where tesselated faces were cleared already.
This conversion can't be switched to BMesh structures because in future
MTexPolys could be changed in a way, that versioning stuff wouldn't work
any more. Another issue is that making such a conversion per-mesh would
lead to quite a code spagetti, which is difficult to follow.
Solved by splitting per-mesh cycle in lib_link_mesh, so now it consists
of three steps:
- Do linking stuff such as custom data layers, materials. Perform a
Conversion stuff like tessface -> polys.
- Convert all MTFaces to materials. This conversion handles all meshes
and creates needed materials.
- Free tessfaces, mark mesh as linked.
Such a separation shouldn't noticeably affect on speed of linking.
|
|
Issue was caused by missing expand for MTexPoly-s tpages.
|
|
|
|
rare cases when it was intentionally set to 0.
|
|
- Fixed issues with calculating matte with balance != 0.5
It used to be used concave combination of minimal and maximal
channel values which could be inpredictable.
Use concave combination of two non-major channels sorted
by their index, so such combination would always use the same
coefficients for particular non-major channels.
- Added despill balance slider which defines balance between
non-major channels used for calculating average of two
colors. Difference between average value and pixel value of
major screen channel defines amount of despill. Balance of
0.5 gives the same behavior as it was before this slider
was added.
---
svn merge -r48678:48679 -r48789:48790 ^/branches/soc-2011-tomato
|
|
|
|
(From personal stash of bugs - since early 2.5 versions)
F-Curve colors get applied only on Graph Editor "refresh()". In some cases, undo
was reverting back to a state where the colors had not yet been set. In these
cases, there would be no refresh() after that undo (until expanding a channel or
some other similar action), resulting in "black F-Curves" appearing. So, now we
force such an update after undo to ensure that the curves never display black.
(Noticed while investigating another bug for Mango related to
CLIP_OT_constraint_to_fcurve not sending notifiers required when new F-Curves
are added)
|
|
|
|
Issue was caused by linking to grease pencil from direct_link* function
which lead to NULL GP data because it's being read a way later.
Link to GP data in lib_link* instead.
|
|
|
|
|
|
|
|
Previously the converted Action Actuators would not have an action assigned. This fix is based on code provided by Maxim Aleynikov in his report: [#30410] not full conversion IPO Actuator in Action Actuator.
|
|
============================
* rename alpha_mtex property to mask_mtex
* More forgotten initialization stuff
* do_versions code to initialize the mask properly
* Mask works now :).
I need to expose more properties for mask textures so that they can be
modified independently. Also I need to see how to modify the properties
panel to accomodate the new brush texture type
|
|
============================
* Add initialization and file save/load code
|
|
|
|
Not sure how this can happen, but added checks in do_versions to make sure the file doesn't crash. Paths will probably have to be reset though.
|
|
|
|
- Re-arrange functions in headers and implementation file to make them
more grouped by entity they're operating with. Also order of functions
in implementation file should match order of functions in header for
easier navigation.
- Rename some functions to match conventions of naming public functions.
- Some code de-duplication, still some room for improvements tho.
- Split main 2D tracking functions into smaller steps to make it more clear.
Accidentally OpenMP was disabled in some of previous commits, re-enable it.
|
|
|
|
Slightly hacky fix to get updates working for Action Editor header when there
are changes of the active action (via undo and/or deleting all keyframes at
once). Since the action referenced by the editor only gets updated when anim
channel filtering (e.g. as a result of the channel syncing operation) is
invoked. Added comments noting where these updates actually occur
|
|
Grease Pencil data was not getting correctly relinked after file reload (for
undo)
|
|
wasting time traversing the list of bones in the Armature
|
|
only for old files which actually needs to be ported to 4 corners
representation.
|
|
===========================================
Major list of changes done in tomato branch:
- Add a planar tracking implementation to libmv
This adds a new planar tracking implementation to libmv. The
tracker is based on Ceres[1], the new nonlinear minimizer that
myself and Sameer released from Google as open source. Since
the motion model is more involved, the interface is
different than the RegionTracker interface used previously
in Blender.
The start of a C API in libmv-capi.{cpp,h} is also included.
- Migrate from pat_{min,max} for markers to 4 corners representation
Convert markers in the movie clip editor / 2D tracker from using
pat_min and pat_max notation to using the a more general, 4-corner
representation.
There is still considerable porting work to do; in particular
sliding from preview widget does not work correct for rotated
markers.
All other areas should be ported to new representation:
* Added support of sliding individual corners. LMB slide + Ctrl
would scale the whole pattern
* S would scale the whole marker, S-S would scale pattern only
* Added support of marker's rotation which is currently rotates
only patterns around their centers or all markers around median,
Rotation or other non-translation/scaling transformation of search
area doesn't make sense.
* Track Preview widget would display transformed pattern which
libmv actually operates with.
- "Efficient Second-order Minimization" for the planar tracker
This implements the "Efficient Second-order Minimization"
scheme, as supported by the existing translation tracker.
This increases the amount of per-iteration work, but
decreases the number of iterations required to converge and
also increases the size of the basin of attraction for the
optimization.
- Remove the use of the legacy RegionTracker API from Blender,
and replaces it with the new TrackRegion API. This also
adds several features to the planar tracker in libmv:
* Do a brute-force initialization of tracking similar to "Hybrid"
mode in the stable release, but using all floats. This is slower
but more accurate. It is still necessary to evaluate if the
performance loss is worth it. In particular, this change is
necessary to support high bit depth imagery.
* Add support for masks over the search window. This is a step
towards supporting user-defined tracker masks. The tracker masks
will make it easy for users to make a mask for e.g. a ball.
Not exposed into interface yet/
* Add Pearson product moment correlation coefficient checking (aka
"Correlation" in the UI. This causes tracking failure if the
tracked patch is not linearly related to the template.
* Add support for warping a few points in addition to the supplied
points. This is useful because the tracking code deliberately
does not expose the underlying warp representation. Instead,
warps are specified in an aparametric way via the correspondences.
- Replace the old style tracker configuration panel with the
new planar tracking panel. From a users perspective, this means:
* The old "tracking algorithm" picker is gone. There is only 1
algorithm now. We may revisit this later, but I would much
prefer to have only 1 algorithm. So far no optimization work
has been done so the speed is not there yet.
* There is now a dropdown to select the motion model. Choices:
* Translation
* Translation, rotation
* Translation, scale
* Translation, rotation, scale
* Affine
* Perspective
* The old "Hybrid" mode is gone; instead there is a toggle to
enable or disable translation-only tracker initialization. This
is the equivalent of the hyrbid mode before, but rewritten to work
with the new planar tracking modes.
* The pyramid levels setting is gone. At a future date, the planar
tracker will decide to use pyramids or not automatically. The
pyramid setting was ultimately a mistake; with the brute force
initialization it is unnecessary.
- Add light-normalized tracking
Added the ability to normalize patterns by their average value while
tracking, to make them invariant to global illumination changes.
Additional details could be found at wiki page [2]
[1] http://code.google.com/p/ceres-solver
[2] http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Motion_Tracker
|
|
Originally was needed to reach easy way of defining masks used for tracking
(do eliminate textures which doesn't belong to feature when tracking.
Implemented as alternative to GP datablock for clip and added switch between
per-clip and per-track GP datablocks -- internal limitations of GP doesn't
allow to display all GP datablocks easily. So either you see.edit GP associated
with clip or with track.
GP strokes associated with track are relative to track's position, following
tracks during tracking and could be shared between several tracks.
Masking code presents in libmv and there's rasterizer of GP datablocks for
masks in blender's tracking module, but they still need to be glued together.
Some documentation cound be found at this page:
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Motion_Tracker#Grease_Pencil
|
|
|
|
|
|
then defines.
|
|
Issue was caused by do_versions being used pdata as reference for active/render/
stencil/clone layer indices instead of fdata.
Added some utility functions used only by do_versions to be sure this indices
are set from fdata for pre-bmesh files.
|
|
Now it's indicates at which scene frame number movie clip starts playing back.
This this setting is still belongs to clip datavlock and used by all users of
clip such as movie compositor nodes, constraints and so.
After long discussion and thoughts about this it was decided that this would
match image's current behavior (which initially seen a bit crappy), but that's
actually allows:
- Keep semantics of start frame in image and clip datablocks in sync
- Allows to support features like support of loading image sequences
with crappy numbers in suffix which doesn't fit long int.
- Allows to eliminate extra boolean checkbox to control such kind of offset.
Hopefully from pipeline POV it wouldn't hurt because idea of having this things
implemented in original way was working only if sequence before processing
started naming form 001.
|
|
preferences file omits most other data blocks and saves only user preferences. It's loaded before the startup blend is loaded, and the preferences information in the startup blend isn't loaded. "Save to defaults" in the preferences screen saves to the preferences blend instead of the default blend. Saving the homefile was renamed from "Save User Settings" to "Save Start-Up Project" for clarity.
|
|
|
|
|