Age | Commit message (Collapse) | Author |
|
|
|
relationships. They allow portions of text to be edited as one and enable quick jumping between and editing of different areas.
Flags control the behaviour and grouping of markers. At present, Ctrl+M places a marker with TMARK_EDITALL set for testing purposes.
I have also split the text area event handler into separate methods for marker handling and the existing text tools. This makes the events system much easier to follow as it was getting a little hairy.
|
|
|
|
revs. 15635:15771
|
|
|
|
|
|
actuator, new orientation constraint actuator, new actuator sensor.
General
=======
- Removal of Damp option in motion actuator (replaced by
Servo control motion).
- No PyDoc at present, will be added soon.
Generalization of the Lvl option
================================
A sensor with the Lvl option selected will always produce an
event at the start of the game or when entering a state or at
object creation. The event will be positive or negative
depending of the sensor condition. A negative pulse makes
sense when used with a NAND controller: it will be converted
into an actuator activation.
Servo control motion
====================
A new variant of the motion actuator allows to control speed
with force. The control if of type "PID" (Propotional, Integral,
Derivate): the force is automatically adapted to achieve the
target speed. All the parameters of the servo controller are
configurable. The result is a great variety of motion style:
anysotropic friction, flying, sliding, pseudo Dloc...
This actuator should be used in preference to Dloc and LinV
as it produces more fluid movements and avoids the collision
problem with Dloc.
LinV : target speed as (X,Y,Z) vector in local or world
coordinates (mostly useful in local coordinates).
Limit: the force can be limited along each axis (in the same
coordinates of LinV). No limitation means that the force
will grow as large as necessary to achieve the target
speed along that axis. Set a max value to limit the
accelaration along an axis (slow start) and set a min
value (negative) to limit the brake force.
P: Proportional coefficient of servo controller, don't set
directly unless you know what you're doing.
I: Integral coefficient of servo controller. Use low value
(<0.1) for slow reaction (sliding), high values (>0.5)
for hard control. The P coefficient will be automatically
set to 60 times the I coefficient (a reasonable value).
D: Derivate coefficient. Leave to 0 unless you know what
you're doing. High values create instability.
Notes: - This actuator works perfectly in zero friction
environment: the PID controller will simulate friction
by applying force as needed.
- This actuator is compatible with simple Drot motion
actuator but not with LinV and Dloc motion.
- (0,0,0) is a valid target speed.
- All parameters are accessible through Python.
Distance constraint actuator
============================
A new variant of the constraint actuator allows to set the
distance and orientation relative to a surface. The controller
uses a ray to detect the surface (or any object) and adapt the
distance and orientation parallel to the surface.
Damp: Time constant (in nb of frames) of distance and
orientation control.
Dist: Select to enable distance control and set target
distance. The object will be position at the given
distance of surface along the ray direction.
Direction: chose a local axis as the ray direction.
Range: length of ray. Objecgt within this distance will be
detected.
N : Select to enable orientation control. The actuator will
change the orientation and the location of the object
so that it is parallel to the surface at the vertical
of the point of contact of the ray.
M/P : Select to enable material detection. Default is property
detection.
Property/Material: name of property/material that the target of
ray must have to be detected. If not set, property/
material filter is disabled and any collisioning object
within range will be detected.
PER : Select to enable persistent operation. Normally the
actuator disables itself automatically if the ray does
not reach a valid target.
time : Maximum activation time of actuator.
0 : unlimited.
>0: number of frames before automatic deactivation.
rotDamp: Time constant (in nb of frame) of orientation control.
0 : use Damp parameter.
>0: use a different time constant for orientation.
Notes: - If neither N nor Dist options are set, the actuator
does not change the position and orientation of the
object; it works as a ray sensor.
- The ray has no "X-ray" capability: if the first object
hit does not have the required property/material, it
returns no hit and the actuator disables itself unless
PER option is enabled.
- This actuator changes the position and orientation but
not the speed of the object. This has an important
implication in a gravity environment: the gravity will
cause the speed to increase although the object seems
to stay still (it is repositioned at each frame).
The gravity must be compensated in one way or another.
the new servo control motion actuator is the simplest
way: set the target speed along the ray axis to 0
and the servo control will automatically compensate
the gravity.
- This actuator changes the orientation of the object
and will conflict with Drot motion unless it is
placed BEFORE the Drot motion actuator (the order of
actuator is important)
- All parameters are accessible through Python.
Orientation constraint
======================
A new variant of the constraint actuator allows to align an
object axis along a global direction.
Damp : Time constant (in nb of frames) of orientation control.
X,Y,Z: Global coordinates of reference direction.
time : Maximum activation time of actuator.
0 : unlimited.
>0: number of frames before automatic deactivation.
Notes: - (X,Y,Z) = (0,0,0) is not a valid direction
- This actuator changes the orientation of the object
and will conflict with Drot motion unless it is placed
BEFORE the Drot motion actuator (the order of
actuator is important).
- This actuator doesn't change the location and speed.
It is compatible with gravity.
- All parameters are accessible through Python.
Actuator sensor
===============
This sensor detects the activation and deactivation of actuators
of the same object. The sensor generates a positive pulse when
the corresponding sensor is activated and a negative pulse when
it is deactivated (the contrary if the Inv option is selected).
This is mostly useful to chain actions and to detect the loss of
contact of the distance motion actuator.
Notes: - Actuators are disabled at the start of the game; if you
want to detect the On-Off transition of an actuator
after it has been activated at least once, unselect the
Lvl and Inv options and use a NAND controller.
- Some actuators deactivates themselves immediately after
being activated. The sensor detects this situation as
an On-Off transition.
- The actuator name can be set through Python.
|
|
http://projects.blender.org/tracker/?func=detail&atid=127&aid=8063&group_id=9
|
|
This patch introduces a simple state engine system with the logic bricks. This system features full
backward compatibility, multiple active states, multiple state transitions, automatic disabling of
sensor and actuators, full GUI support and selective display of sensors and actuators.
Note: Python API is available but not documented yet. It will be added asap.
State internals
===============
The state system is object based. The current state mask is stored in the object as a 32 bit value;
each bit set in the mask is an active state. The controllers have a state mask too but only one bit
can be set: a controller belongs to a single state. The game engine will only execute controllers
that belong to active states. Sensors and actuators don't have a state mask but are effectively
attached to states via their links to the controllers. Sensors and actuators can be connected to more
than one state. When a controller becomes inactive because of a state change, its links to sensors
and actuators are temporarily broken (until the state becomes active again). If an actuator gets isolated,
i.e all the links to controllers are broken, it is automatically disabled. If a sensor gets isolated,
the game engine will stop calling it to save CPU. It will also reset the sensor internal state so that
it can react as if the game just started when it gets reconnected to an active controller. For example,
an Always sensor in no pulse mode that is connected to a single state (i.e connected to one or more
controllers of a single state) will generate a pulse each time the state becomes active. This feature is
not available on all sensors, see the notes below.
GUI
===
This system system is fully configurable through the GUI: the object state mask is visible under the
object bar in the controller's colum as an array of buttons just like the 3D view layer mask.
Click on a state bit to only display the controllers of that state. You can select more than one state
with SHIFT-click. The All button sets all the bits so that you can see all the controllers of the object.
The Ini button sets the state mask back to the object default state. You can change the default state
of object by first selecting the desired state mask and storing using the menu under the State button.
If you define a default state mask, it will be loaded into the object state make when you load the blend
file or when you run the game under the blenderplayer. However, when you run the game under Blender,
the current selected state mask will be used as the startup state for the object. This allows you to test
specific state during the game design.
The controller display the state they belong to with a new button in the controller header. When you add
a new controller, it is added by default in the lowest enabled state. You can change the controller state
by clicking on the button and selecting another state. If more than one state is enabled in the object
state mask, controllers are grouped by state for more readibility.
The new Sta button in the sensor and actuator column header allows you to display only the sensors and
actuators that are linked to visible controllers.
A new state actuator is available to modify the state during the game. It defines a bit mask and
the operation to apply on the current object state mask:
Cpy: the bit mask is copied to the object state mask.
Add: the bits that set in the bit mask will be turned on in the object state mask.
Sub: the bits that set in the bit mask will be turned off in the object state mask.
Inv: the bits that set in the bit mask will be inverted in the objecyy state mask.
Notes
=====
- Although states have no name, a simply convention consists in using the name of the first controller
of the state as the state name. The GUI will support that convention by displaying as a hint the name
of the first controller of the state when you move the mouse over a state bit of the object state mask
or of the state actuator bit mask.
- Each object has a state mask and each object can have a state engine but if several objects are
part of a logical group, it is recommended to put the state engine only in the main object and to
link the controllers of that object to the sensors and actuators of the different objects.
- When loading an old blend file, the state mask of all objects and controllers are initialized to 1
so that all the controllers belong to this single state. This ensures backward compatibility with
existing game.
- When the state actuator is activated at the same time as other actuators, these actuators are
guaranteed to execute before being eventually disabled due to the state change. This is useful for
example to send a message or update a property at the time of changing the state.
- Sensors that depend on underlying resource won't reset fully when they are isolated. By the time they
are acticated again, they will behave as follow:
* keyboard sensor: keys already pressed won't be detected. The keyboard sensor is only sensitive
to new key press.
* collision sensor: objects already colliding won't be detected. Only new collisions are
detected.
* near and radar sensor: same as collision sensor.
|
|
Shape Action are now supported in the BGE. A new type of actuator "Shape Action" is available on mesh objects. It can be combined with Action actuator on parent armature. Only relative keys are supported. All the usual action options are available: type, blending, priority, Python API. Only actions with shape channels should be specified of course, otherwise the actuator has no effect. Shape action will still work after a mesh replacement provided that the new mesh has compatible shape keys.
|
|
svn merge -r14988:15170 https://svn.blender.org/svnroot/bf-blender/trunk/blender
|
|
BLI_kdopbvh (just like kdtree interface now), huge speedup for selfcollisions, also better normal collisions (merge from cloth branch)
|
|
https://svn.blender.org/svnroot/bf-blender/trunk/blender
|
|
a linked file.
|
|
https://svn.blender.org/svnroot/bf-blender/trunk/blender
|
|
Add ffmpeg expert option (meaning _all_ ffmpeg option) to render dialog
using properties.
Also adds: H264 preset, that doesn't screw up output.
|
|
system (better + general access to kdop, uses less memory, put it into BLI_* namespace and usage defined like existing BLI_kdtree_*). Deleted old kdop.c
|
|
particles on windows, now allocates smaller chunks of memory.
|
|
gave "memory block reconstruct: end corrupt" errors. This bug was
harmless, just gave ugly error messages.
|
|
|
|
(after the DNA rearrangement to fix a bug yesterday). But be carefull your settings get lost. Best thing to do: 1. write settings down, 2. open blend in new (>=17 subversion) blender and just save the file (and ignore warnings on the command line.) Take this as a good example why not to use svn blender versions for production purposes ;)
|
|
also removed quat, dquat, and sumohandle from the Object struct since they aren't used anywhere.
|
|
to the new system didn't work correct.
|
|
blocks that were previously missed; and b) greatly increase my
ohloh stats!
|
|
|
|
sprintf(str, "/bin/su root -c 'cd %s; /bin/tar cf - \"%s\" | (/bin/cd %s; /bin/tar xf -)'", from, file, to);
return system(str);
This would ask for a password in blenders terminal, in ubuntu there is no root user...
If this feature is added back it should be written in a much nicer way.
Also made HKey toggle hidden files in the file selector.
|
|
|
|
=======================
Caching and Baking:
- The point cache is now cleared on DAG_object_flush_update(), and not cleared for time dependency graph updates.
- There is now a Bake button instead of Protect. Also cache start and end frames were added to softbody and particles.
- The cloth autoprotect feature was removed.
- The Ctrl+B menu now also bakes cloth and particles next to softbody and fluids. Additionally there are now frree bake and free cache menu entries.
- The point cache api has been changed. There is now a PTCacheID struct for each point cache type that can be filled and then used to call the point cache functions.
- PointCache struct was added to DNA and is automatically allocated for each physics type.
- Soft body now supports Bake Editing just like cloth.
- Tried to make the systems deal consistently with time ipo's and offsets. Still not sure it all works correct, but too complicated to solve completely now.
Library Linking:
- Added some more warnings to prevent editing settings on library linked objects.
- Linked objects now read from the cache located next to the original library file, and never write to it. This restores old behavior for softbodies. For local simulation the mesh and not the object should be linked.
- Dupligroups and proxies can't create local point caches at the moment, how to implement that I'm not sure. We probably need a proxy point cache for that to work (ugh).
Physics UI:
- Renamed deflection panel to collision for consistency and reorganized the buttons. Also removed some softbody collision buttons from the softbody panel that were duplicated in this panel for cloth.
- Tweaked field panel buttons to not jump around when changing options.
- Tabbing e.g. Soft Body Collision into the Soft Body panel, it now only shows Collision to make the panel names readable.
- I tried to make enabled/disabling physics more consistent, since all three system did things different. Now the two modifier buttons to enable the modifier for the viewport and rendering are also duplicated in the physics panels. Toggling the Soft Body and Cloth buttons now both remove their modifiers.
- Fixed modifier error drawing glitch.
Particles:
- Particles are now recalculated more often than before. Previously it did partial updates based on the changes, but that doesn't work well with DAG_object_flush_update() ..
- Fixed memory leak loading keyed particle system. Now keys are not written to file anymore but always created after loading.
- Make particle threads work with autothreads.
Continue Physics:
- The timeline play now has a Continue Physics option in the playback menu, which keeps the simulations going without writing them to the cache.
- This doesn't always work that well, some changes are not immediately updated, but this can be improved later. Still it's fun to get a feel for the physics.
Todo:
- Point cache can get out of sync with and undo and changing a file without saving it.
- Change the point cache file format to store a version (so old point cache files can be either converted or at least ignored), and to do correct endian conversion.
- Menu item and/or buttons for Ctrl+B.
- A system("rm ..") was changed to remove() since the former is very slow for clearing point caches. These system() calls were already giving trouble in a bug in the tracker, but really most use of this system("") should be changed and tested.
- The Soft Body Collision and Clot Collision panel titles don't mention there's point cache settings there too, doing that makes them unreadable with the default panel setup.. but may need to make the names longer anyway.
|
|
This patch consists in new KX_GameObject::SetParent() and KX_GameObject::RemoveParent() functions to create and destroy parent relation during game. These functions are accessible through python and through a new actuator KX_ParentActuator. Function documentation in PyDoc.
The object keeps its orientation, position and scale when it is parented but will further rotate, move and scale with its parent from that point on. When the parent relation is broken, the object keeps the orientation, position and scale it had at that time.
The function has no effect if any of the X/Y/Z scale of the object or its new parent are below Epsilon.
|
|
-Handling of fluid particles was not coded at all
-Now things should work properly, but as fluid particles are not very familiar to me I'd appreciate some thorough testing
|
|
the active images aspect ratio.
This is now default but can be disabled in the UV Calculation panel. At the moment its called "Image Aspect" but another name could be better.
|
|
A lot of fixes for anim_startofs / anim_endofs:
* crashed when striplen was 0 and startstill / endstill still in use
* made it work for Audio (HD and RAM)
* made it work for Image Sequences
* added a new cutting tool, that uses anim_startofs / endofs instead of
startofs / endofs. This is now the default and called "hard cut"
* moved old cutting method to "Shift-K" and renamed it "soft cut"
|
|
The latter is now obsolete and will be soon
removed.
Some tiny build tweaks for darwin committed
in preparation of bigger changes for proper
SDK suport both on intel and ppc
|
|
(Note to who-ever made all the changes referring to r.scemode:
r.scemode is an int, not a short!)
|
|
|
|
cloth settings in old files but I had to do it before release because naming convention was really bad in cloth (e.g. using SimulationSettings instead of ClothSimSettings in DNA). Same for some structure in CollisionModifier but with no sideeffects.
|
|
----------
Bugfix #6543: Blender.Library.Load() could segfault if called more than once
with a library of different endian type. In the process discovered an
invalid memory reference in other another function calling library_append().
Thanks to Brecht for the pointers on tracking this old bug down.
|
|
blenderbuttons is good
and it compiles
|
|
|
|
blenderbuttons still bad
not let this compile
|
|
linking in objects that indirectly point to groups that are already directly linked in. This has been a problem for many peach scenes. but saving and reloading made the objects appear.
|
|
|
|
reference black, reference white and gamma.
Added 16 bit TIFF saving.
This needs more work to cleanup code and add 16 bit TIFF reading, but
committing it now so it can be tested.
|
|
|
|
Geoffrey):
* no newline at end of file (2-3)
* uninitialised vars (1)
* unused vars (1-2)
* assigning/comparing pointers and ints (numerous)
* etc.
|
|
scripts running when you open a blend file.
Also scripts will re-run on undo rather then closing.
This is done by saving and loading the name of the script or textblock of the 'Script' datablock, connected to the ScriptSpace. This way when there is a name but the script dosnt run.
Blender runs the script or text block if available.
|
|
|
|
memory blocks anymore, but smaller fixed size blocks, so that diffing
can be more effective. For example helps in sculpt mode when making
only local changes to the mesh, previously it would copy the whole
MVert array for each undo step.
|
|
Fixed a bug with ibuf caching on startstill / endstill.
The new blend modes happened to force start and endstill to be rendered
over and over again. This could get very annoying especially on scene
strips.
We therefore now cache the original start or endstill ibuf seperately
and copy on demand.
|
|
|